Export limit exceeded: 26231 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26231 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54053 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: fix possible NULL pointer dereference It is possible that iwl_pci_probe() will fail and free the trans, then afterwards iwl_pci_remove() will be called and crash by trying to access trans which is already freed, fix it. iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2 wfpm id 0xa5a5a5a2 iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2 ... BUG: kernel NULL pointer dereference, address: 0000000000000028 ... RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi] pci_device_remove+0x3e/0xb0 device_release_driver_internal+0x103/0x1f0 driver_detach+0x4c/0x90 bus_remove_driver+0x5c/0xd0 driver_unregister+0x31/0x50 pci_unregister_driver+0x40/0x90 iwl_pci_unregister_driver+0x15/0x20 [iwlwifi] __exit_compat+0x9/0x98 [iwlwifi] __x64_sys_delete_module+0x147/0x260 | ||||
| CVE-2023-54055 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix memory leak of PBLE objects On rmmod of irdma, the PBLE object memory is not being freed. PBLE object memory are not statically pre-allocated at function initialization time unlike other HMC objects. PBLEs objects and the Segment Descriptors (SD) for it can be dynamically allocated during scale up and SD's remain allocated till function deinitialization. Fix this leak by adding IRDMA_HMC_IW_PBLE to the iw_hmc_obj_types[] table and skip pbles in irdma_create_hmc_obj but not in irdma_del_hmc_objects(). | ||||
| CVE-2023-54056 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kheaders: Use array declaration instead of char Under CONFIG_FORTIFY_SOURCE, memcpy() will check the size of destination and source buffers. Defining kernel_headers_data as "char" would trip this check. Since these addresses are treated as byte arrays, define them as arrays (as done everywhere else). This was seen with: $ cat /sys/kernel/kheaders.tar.xz >> /dev/null detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1027! ... RIP: 0010:fortify_panic+0xf/0x20 [...] Call Trace: <TASK> ikheaders_read+0x45/0x50 [kheaders] kernfs_fop_read_iter+0x1a4/0x2f0 ... | ||||
| CVE-2023-54057 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow, because the string specifier in the format string sscanf() has no width limitation. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2023-54058 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Check if ffa_driver remove is present before executing Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 | ||||
| CVE-2023-54066 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb-v2: gl861: Fix null-ptr-deref in gl861_i2c_master_xfer In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") | ||||
| CVE-2023-54069 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow When we calculate the end position of ext4_free_extent, this position may be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not the first case of adjusting the best extent, that is, new_bex_end > 0, the following BUG_ON will be triggered: ========================================================= kernel BUG at fs/ext4/mballoc.c:5116! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279 RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430 Call Trace: <TASK> ext4_mb_use_best_found+0x203/0x2f0 ext4_mb_try_best_found+0x163/0x240 ext4_mb_regular_allocator+0x158/0x1550 ext4_mb_new_blocks+0x86a/0xe10 ext4_ext_map_blocks+0xb0c/0x13a0 ext4_map_blocks+0x2cd/0x8f0 ext4_iomap_begin+0x27b/0x400 iomap_iter+0x222/0x3d0 __iomap_dio_rw+0x243/0xcb0 iomap_dio_rw+0x16/0x80 ========================================================= A simple reproducer demonstrating the problem: mkfs.ext4 -F /dev/sda -b 4096 100M mount /dev/sda /tmp/test fallocate -l1M /tmp/test/tmp fallocate -l10M /tmp/test/file fallocate -i -o 1M -l16777203M /tmp/test/file fsstress -d /tmp/test -l 0 -n 100000 -p 8 & sleep 10 && killall -9 fsstress rm -f /tmp/test/tmp xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192" We simply refactor the logic for adjusting the best extent by adding a temporary ext4_free_extent ex and use extent_logical_end() to avoid overflow, which also simplifies the code. | ||||
| CVE-2023-54087 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubi: Fix possible null-ptr-deref in ubi_free_volume() It willl cause null-ptr-deref in the following case: uif_init() ubi_add_volume() cdev_add() -> if it fails, call kill_volumes() device_register() kill_volumes() -> if ubi_add_volume() fails call this function ubi_free_volume() cdev_del() device_unregister() -> trying to delete a not added device, it causes null-ptr-deref So in ubi_free_volume(), it delete devices whether they are added or not, it will causes null-ptr-deref. Handle the error case whlie calling ubi_add_volume() to fix this problem. If add volume fails, set the corresponding vol to null, so it can not be accessed in kill_volumes() and release the resource in ubi_add_volume() error path. | ||||
| CVE-2023-54089 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_pmem: add the missing REQ_OP_WRITE for flush bio When doing mkfs.xfs on a pmem device, the following warning was ------------[ cut here ]------------ WARNING: CPU: 2 PID: 384 at block/blk-core.c:751 submit_bio_noacct Modules linked in: CPU: 2 PID: 384 Comm: mkfs.xfs Not tainted 6.4.0-rc7+ #154 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:submit_bio_noacct+0x340/0x520 ...... Call Trace: <TASK> ? submit_bio_noacct+0xd5/0x520 submit_bio+0x37/0x60 async_pmem_flush+0x79/0xa0 nvdimm_flush+0x17/0x40 pmem_submit_bio+0x370/0x390 __submit_bio+0xbc/0x190 submit_bio_noacct_nocheck+0x14d/0x370 submit_bio_noacct+0x1ef/0x520 submit_bio+0x55/0x60 submit_bio_wait+0x5a/0xc0 blkdev_issue_flush+0x44/0x60 The root cause is that submit_bio_noacct() needs bio_op() is either WRITE or ZONE_APPEND for flush bio and async_pmem_flush() doesn't assign REQ_OP_WRITE when allocating flush bio, so submit_bio_noacct just fail the flush bio. Simply fix it by adding the missing REQ_OP_WRITE for flush bio. And we could fix the flush order issue and do flush optimization later. | ||||
| CVE-2023-54097 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: stm32-pwr: fix of_iomap leak Smatch reports: drivers/regulator/stm32-pwr.c:166 stm32_pwr_regulator_probe() warn: 'base' from of_iomap() not released on lines: 151,166. In stm32_pwr_regulator_probe(), base is not released when devm_kzalloc() fails to allocate memory or devm_regulator_register() fails to register a new regulator device, which may cause a leak. To fix this issue, replace of_iomap() with devm_platform_ioremap_resource(). devm_platform_ioremap_resource() is a specialized function for platform devices. It allows 'base' to be automatically released whether the probe function succeeds or fails. Besides, use IS_ERR(base) instead of !base as the return value of devm_platform_ioremap_resource() can either be a pointer to the remapped memory or an ERR_PTR() encoded error code if the operation fails. | ||||
| CVE-2023-54099 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: Protect reconfiguration of sb read-write from racing writes The reconfigure / remount code takes a lot of effort to protect filesystem's reconfiguration code from racing writes on remounting read-only. However during remounting read-only filesystem to read-write mode userspace writes can start immediately once we clear SB_RDONLY flag. This is inconvenient for example for ext4 because we need to do some writes to the filesystem (such as preparation of quota files) before we can take userspace writes so we are clearing SB_RDONLY flag before we are fully ready to accept userpace writes and syzbot has found a way to exploit this [1]. Also as far as I'm reading the code the filesystem remount code was protected from racing writes in the legacy mount path by the mount's MNT_READONLY flag so this is relatively new problem. It is actually fairly easy to protect remount read-write from racing writes using sb->s_readonly_remount flag so let's just do that instead of having to workaround these races in the filesystem code. [1] https://lore.kernel.org/all/00000000000006a0df05f6667499@google.com/T/ | ||||
| CVE-2023-54101 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: driver: soc: xilinx: use _safe loop iterator to avoid a use after free The hash_for_each_possible() loop dereferences "eve_data" to get the next item on the list. However the loop frees eve_data so it leads to a use after free. Use hash_for_each_possible_safe() instead. | ||||
| CVE-2023-54114 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment() As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. | ||||
| CVE-2023-54115 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pcmcia: rsrc_nonstatic: Fix memory leak in nonstatic_release_resource_db() When nonstatic_release_resource_db() frees all resources associated with an PCMCIA socket, it forgets to free socket_data too, causing a memory leak observable with kmemleak: unreferenced object 0xc28d1000 (size 64): comm "systemd-udevd", pid 297, jiffies 4294898478 (age 194.484s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f0 85 0e c3 00 00 00 00 ................ 00 00 00 00 0c 10 8d c2 00 00 00 00 00 00 00 00 ................ backtrace: [<ffda4245>] __kmem_cache_alloc_node+0x2d7/0x4a0 [<7e51f0c8>] kmalloc_trace+0x31/0xa4 [<d52b4ca0>] nonstatic_init+0x24/0x1a4 [pcmcia_rsrc] [<a2f13e08>] pcmcia_register_socket+0x200/0x35c [pcmcia_core] [<a728be1b>] yenta_probe+0x4d8/0xa70 [yenta_socket] [<c48fac39>] pci_device_probe+0x99/0x194 [<84b7c690>] really_probe+0x181/0x45c [<8060fe6e>] __driver_probe_device+0x75/0x1f4 [<b9b76f43>] driver_probe_device+0x28/0xac [<648b766f>] __driver_attach+0xeb/0x1e4 [<6e9659eb>] bus_for_each_dev+0x61/0xb4 [<25a669f3>] driver_attach+0x1e/0x28 [<d8671d6b>] bus_add_driver+0x102/0x20c [<df0d323c>] driver_register+0x5b/0x120 [<942cd8a4>] __pci_register_driver+0x44/0x4c [<e536027e>] __UNIQUE_ID___addressable_cleanup_module188+0x1c/0xfffff000 [iTCO_vendor_support] Fix this by freeing socket_data too. Tested on a Acer Travelmate 4002WLMi by manually binding/unbinding the yenta_cardbus driver (yenta_socket). | ||||
| CVE-2023-54117 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dcssblk: fix kernel crash with list_add corruption Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. | ||||
| CVE-2023-54118 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: setup GPIO controller later in probe The GPIO controller component of the sc16is7xx driver is setup too early, which can result in a race condition where another device tries to utilise the GPIO lines before the sc16is7xx device has finished initialising. This issue manifests itself as an Oops when the GPIO lines are configured: Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1c This patch moves the setup of the GPIO controller functions to later in the probe function, ensuring the sc16is7xx device has already finished initialising by the time other devices try to make use of the GPIO lines. The error handling has also been reordered to reflect the new initialisation order. | ||||
| CVE-2023-54133 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfp: clean mc addresses in application firmware when closing port When moving devices from one namespace to another, mc addresses are cleaned in software while not removed from application firmware. Thus the mc addresses are remained and will cause resource leak. Now use `__dev_mc_unsync` to clean mc addresses when closing port. | ||||
| CVE-2023-54134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: autofs: fix memory leak of waitqueues in autofs_catatonic_mode Syzkaller reports a memory leak: BUG: memory leak unreferenced object 0xffff88810b279e00 (size 96): comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'..... 08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'............. backtrace: [<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046 [<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline] [<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378 [<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593 [<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619 [<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897 [<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910 [<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline] [<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline] [<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856 [<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd autofs_wait_queue structs should be freed if their wait_ctr becomes zero. Otherwise they will be lost. In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new waitqueue struct is allocated in autofs_wait(), its initial wait_ctr equals 2. After that wait_event_killable() is interrupted (it returns -ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not satisfied. Actually, this condition can be satisfied when autofs_wait_release() or autofs_catatonic_mode() is called and, what is also important, wait_ctr is decremented in those places. Upon the exit of autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process begins: kill_sb calls autofs_catatonic_mode(), which should have freed the waitqueues, but it only decrements its usage counter to zero which is not a correct behaviour. edit:imk This description is of course not correct. The umount performed as a result of an expire is a umount of a mount that has been automounted, it's not the autofs mount itself. They happen independently, usually after everything mounted within the autofs file system has been expired away. If everything hasn't been expired away the automount daemon can still exit leaving mounts in place. But expires done in both cases will result in a notification that calls autofs_wait_release() with a result status. The problem case is the summary execution of of the automount daemon. In this case any waiting processes won't be woken up until either they are terminated or the mount is umounted. end edit: imk So in catatonic mode we should free waitqueues which counter becomes zero. edit: imk Initially I was concerned that the calling of autofs_wait_release() and autofs_catatonic_mode() was not mutually exclusive but that can't be the case (obviously) because the queue entry (or entries) is removed from the list when either of these two functions are called. Consequently the wait entry will be freed by only one of these functions or by the woken process in autofs_wait() depending on the order of the calls. end edit: imk | ||||
| CVE-2023-54136 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: sprd: Fix DMA buffer leak issue Release DMA buffer when _probe() returns failure to avoid memory leak. | ||||
| CVE-2023-54137 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/type1: fix cap_migration information leak Fix an information leak where an uninitialized hole in struct vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace. The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as shown in this pahole(1) output: struct vfio_iommu_type1_info_cap_migration { struct vfio_info_cap_header header; /* 0 8 */ __u32 flags; /* 8 4 */ /* XXX 4 bytes hole, try to pack */ __u64 pgsize_bitmap; /* 16 8 */ __u64 max_dirty_bitmap_size; /* 24 8 */ /* size: 32, cachelines: 1, members: 4 */ /* sum members: 28, holes: 1, sum holes: 4 */ /* last cacheline: 32 bytes */ }; The cap_mig variable is filled in without initializing the hole: static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu, struct vfio_info_cap *caps) { struct vfio_iommu_type1_info_cap_migration cap_mig; cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION; cap_mig.header.version = 1; cap_mig.flags = 0; /* support minimum pgsize */ cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap); cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX; return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig)); } The structure is then copied to a temporary location on the heap. At this point it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace later: int vfio_info_add_capability(struct vfio_info_cap *caps, struct vfio_info_cap_header *cap, size_t size) { struct vfio_info_cap_header *header; header = vfio_info_cap_add(caps, size, cap->id, cap->version); if (IS_ERR(header)) return PTR_ERR(header); memcpy(header + 1, cap + 1, size - sizeof(*header)); return 0; } This issue was found by code inspection. | ||||