Export limit exceeded: 54276 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54276 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72339 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: qede: fix off-by-one in BD ring consumption on build_skb failure qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit 4e910dbe3650 ("qede: confirm skb is allocated before using") added a NULL check inside qede_build_skb() to prevent a NULL pointer dereference, but did not address the missing NULL checks in the callers, making this off-by-one reachable. Fix this by adding NULL checks for the return value of qede_build_skb() in both qede_rx_build_skb() and qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring manipulation. | ||||
| CVE-2026-72289 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Check the interrupt is still ours before migrating it vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating an interrupt to another vCPU. After reacquiring the locks it only checks that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq)) before moving the interrupt, which assumes that an interrupt whose affinity is preserved is still queued on this vCPU's ap_list. That assumption no longer holds if the interrupt is taken off the ap_list while the locks are dropped. vgic_flush_pending_lpis() removes the interrupt from the list and sets irq->vcpu to NULL, but leaves enabled/pending/target_vcpu untouched. As the interrupt is still enabled and pending, vgic_target_oracle() returns the same target_vcpu, so the affinity check passes and list_del() is run a second time on an entry that has already been removed. Also check that the interrupt is still assigned to this vCPU (irq->vcpu == vcpu) before moving it. | ||||
| CVE-2026-72294 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Check irq validity in kvm_vcpu_ioctl_interrupt() Function kvm_vcpu_ioctl_interrupt() can be called from userspace, here add irq validility cheking in kvm_vcpu_ioctl_interrupt(). | ||||
| CVE-2026-72319 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: ensure inner headers in ICMP errors are in headroom Sashiko points out that after stripping the outer headers with pskb_pull() we should ensure the inner IP headers in ICMP errors from tunnels are present in the skb headroom for functions like ipv4_update_pmtu(), icmp_send() and IP_VS_DBG(). Also, add more checks for the length of the inner headers. | ||||
| CVE-2026-72360 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays Currently defined VF/PF relay actions use regular REQUEST messages only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT messages as this would result in breaking the VFPF ABI protocol and also might trigger an assert on the PF side. (cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) | ||||
| CVE-2026-72406 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available. | ||||
| CVE-2026-72417 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: Validate iph->ihl in nf_flow_ip4_tunnel_proto() Add sanity check for iph->ihl field in nf_flow_ip4_tunnel_proto() before using it to compute the header size, avoiding out-of-bounds access with malformed IP headers. While at it, use iph->protocol instead of the hardcoded IPPROTO_IPIP constant when setting ctx->tun.proto and reference ctx->tun.hdr_size when updating ctx->offset. | ||||
| CVE-2026-72446 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is NULL and &info[-EINVAL] is a wild pointer; reading info->data_ep_pipe faults (kernel oops). - If the card was enabled at least once (.info allocated) and the disable names an interface that does not match, &info[-EINVAL] points before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte write (both pipe fields are cleared to 0). That is memory corruption, not just a NULL dereference. The request is reachable from unprivileged local userspace over AF_QIPCRTR. Reject a disable request with no resolved interface, matching the guard the enable path already has. | ||||
| CVE-2026-72480 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling ams_event_to_channel() may return a pointer past the end of dev->channels when no matching scan_index is found. This can lead to invalid memory access in ams_handle_event(). Add a bounds check in ams_event_to_channel() and return NULL when no channel is found. Also guard the caller to safely handle this case. | ||||
| CVE-2026-74457 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | ||||
| CVE-2026-74275 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach() In cxl_cancel_auto_attach(), it assumes cxled->pos is a valid index for accessing p->targets[]. However, cxled->pos can be set to negative errno in cxl_region_sort_targets() if cxl_calc_interleave_pos() fails. This causes the driver to use a negative index to access p->targets[], resulting in out-of-bounds access. Fix it by walking p->targets[] instead of using cxled->pos directly. | ||||
| CVE-2026-74280 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: crypto: marvell/octeontx - fix DMA cleanup using wrong loop index The sg_cleanup path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one. | ||||
| CVE-2026-74295 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: hdac_hdmi: Validate written enum value hdac_hdmi_set_pin_port_mux() uses the written enum value to index the texts array before calling snd_soc_dapm_put_enum_double(), which validates that the value is within the enum item range. An out-of-range value can therefore make the driver read past the texts array before the helper rejects the write. Move the lookup after the helper has accepted the value. | ||||
| CVE-2026-74297 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix undefined shift of user RQ WQE size set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on the user-provided rq_wqe_shift, which is only checked to be greater than 32, so shifts of 32 are still accepted. A shift of 31 also overflows a signed integer, leading to undefined behavior. Use check_shl_overflow() to compute the RQ WQE size and reject any invalid values. | ||||
| CVE-2026-74292 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tegra: tegra210_ahub: Validate written enum value tegra_ahub_put_value_enum() reads e->values[item[0]] before checking whether item[0] is within the enum item range. The existing check therefore happens too late to prevent an out-of-range read of the values array. Move the check before the array access. | ||||
| CVE-2026-74309 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler Look up the IRQ index in oct_hw->irqs instead of assuming irq - irqs[0]. This supports non-contiguous IRQ numbers and avoids incorrect ring indexing when irqs[0] is not the base. | ||||
| CVE-2026-74358 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix fast commit wait/wake bit mapping on 64-bit On 64-bit, ext4 dynamic inode states live in the upper half of i_flags, and ext4_test_inode_state() applies the corresponding +32 offset. The fast-commit wait and wake paths open-coded the wait key with the raw EXT4_STATE_* value. Add small helpers for the state wait word and bit, and use them for the FC_COMMITTING and FC_FLUSHING_DATA waits so the wait key follows the same mapping as the state helpers. | ||||
| CVE-2026-74346 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix OOB read during CQ MR registration Sashiko pointed out an unrelated bug during a previous patch: https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com This change fixes the bug by eliminating the cqmr->split field which was not being set properly and instead just checks the CQ resize feature flag directly. The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE is set, but it was not being set until CQ creation time, which is _after_ CQ memory registration (the only other place where it is referenced). As a result, it would always be false during MR registration and would therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2 HW and beyond: cqmr->shadow = (dma_addr_t)arr[req->cq_pages]; The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal to iwmr->page_cnt and therefore equal to the size of arr, which would cause an OOB read by one. | ||||
| CVE-2026-74361 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix FDP fdpcidx bounds check The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=, incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). | ||||
| CVE-2026-74320 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: sm501fb: Fix buffer errors in OF binding code The code that gets the frame buffer mode from OF has 'use after free', 'buffer overrun' and memory leaks. info->edid_data isn't free if the probe functions fail or if pd->def_mode is set. If both the CRT and PANEL are enabled info->edid_data is used after being freed and is freed twice. The string returned by of_get_property(np, "mode", &len) is just written over either the static "640x480-16@60" or the module parameter string without any regard for the length (which is most likely longer). Use kstrump() for the OF mode and free everything before freeing 'info. | ||||