Export limit exceeded: 54276 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54276 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68278 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix buffer overflows in sideband chunk accumulation drm_dp_sideband_append_payload() has three related bugs when processing device-provided sideband reply data: 1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken directly from the DP sideband header. If a device sends msg_len=0, curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len) is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow). drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy() writes 255 bytes into msg[], both far out of bounds. 2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks until curchunk_idx reaches curchunk_len, writing up to 15 bytes past the end of chunk[] into msg[]. 3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256], so the memcpy can spill into adjacent struct fields. All three are reachable from any DP MST device that can forge sideband reply messages on a physical connection. | ||||
| CVE-2026-68277 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers Three sideband reply parsers read 16-bit fields as: val = (raw->msg[idx] << 8) | (raw->msg[idx+1]); and check bounds only after the fact. When idx == raw->curlen, raw->msg[idx+1] reads one byte past the received message data into the following struct fields (curchunk_len, curchunk_idx, curlen). Affected functions: - drm_dp_sideband_parse_enum_path_resources_ack() full_payload_bw_number and avail_payload_bw_number fields - drm_dp_sideband_parse_allocate_payload_ack() allocated_pbn field - drm_dp_sideband_parse_query_payload_ack() allocated_pbn field Fix by using a single combined check (idx + 2 > curlen) before each 2-byte read. Since the check is strictly tighter than idx > curlen, no separate step is needed. [added fixes tag] | ||||
| CVE-2026-68099 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL check_add_overflow() unconditionally writes the truncated sum into *d even on overflow, per its contract in include/linux/overflow.h. The four check_add_overflow() guards in set_posix_acl_entries_dacl() and set_ntacl_dacl() break out of the ACE-building loops on overflow, but the truncated *size is then consumed downstream at the end of set_ntacl_dacl(): pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size); This produces an on-wire NT ACL whose pndacl->size under-reports the bytes actually written by the preceding fill_ace_for_sid()/memcpy() calls, yielding a malformed ACL that can trigger out-of-bounds reads when re-parsed by clients or ksmbd itself. Restore *size to its pre-addition value on each overflow branch (via `*size -= ace_sz` / `size -= nt_ace_size`) so that after the break, *size once again holds the cumulative size of the successfully-written ACEs. The committed ACL is then truncated-but-self-consistent rather than malformed. The ksmbd DACL builders are the only check_add_overflow() sites found where an overflow path breaks out of a loop and the destination value is consumed afterward. The other nearby break-style cases either return -EINVAL on overflow (transport_ipc.c) or break without consuming the overflowed destination value afterward (buildid.c). | ||||
| CVE-2026-64280 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() afu_ioctl_dma_map() accepts a 64-bit length from userspace via DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value is passed to afu_dma_pin_pages() where npages is derived as length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes int nr_pages, causing implicit truncation if length is very large. Validate map.length at the ioctl entry point before calling afu_dma_map_region(), rejecting values whose page count exceeds INT_MAX. | ||||
| CVE-2026-64272 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - fix touch indexing for MMS134S and MMS136 The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly. Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size. | ||||
| CVE-2026-64269 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region. The resulting behaviour depends on the IOMMU configuration: with no IOMMU or in passthrough mode the read may extend into memory adjacent to the chunk and be returned to the peer, which can disclose host memory; with a translating IOMMU the out-of-range access is expected to fault and abort the connection. In either case the transfer exceeds what the protocol permits and is driven by a remote peer. Reject a descriptor length above max_chunk_size, mirroring the existing off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients do not exceed it: the client sets desc[0].len to its MR length, which is capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). | ||||
| CVE-2024-38620 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Remove HCI_AMP support Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether. | ||||
| CVE-2026-74679 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Use unsigned int for ndp_index The variable ndp_index is declared as a signed integer, but it stores the return value of get_ncm(), which is unsigned. A malicious host can supply a large offset that overflows the signed ndp_index, making it negative. Because ndp_index is compared against unsigned bounds, this negative value bypasses sanity checks and leads to an out-of-bounds read when calculating the address of the NDP block (ntb_ptr + ndp_index). Fix this by changing ndp_index to unsigned int to ensure consistent unsigned comparisons throughout the function. | ||||
| CVE-2026-28896 | 1 Apple | 1 Macos | 2026-08-22 | 7.7 High |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An attacker may be able to cause unexpected system termination or read kernel memory. | ||||
| CVE-2026-65795 | 1 Microsoft | 21 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 18 more | 2026-08-22 | 6.7 Medium |
| Relative path traversal in Windows DNS allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-72149 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra: Fix burst size calculation Currently, the Tegra GPC DMA hardware requires the transfer length to be a multiple of the max burst size configured for the channel. When a client requests a transfer where the length is not evenly divisible by the configured max burst size, the DMA hangs with partial burst at the end. Fix this by reducing the burst size to the largest power-of-2 value that evenly divides the transfer length. For example, a 40-byte transfer with a 16-byte max burst will now use an 8-byte burst (40 / 8 = 5 complete bursts) instead of causing a hang. This issue was observed with the PL011 UART driver where TX DMA transfers of arbitrary lengths were stuck. | ||||
| CVE-2026-72156 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL. | ||||
| CVE-2026-72204 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: centalize $INDEX_ROOT header validation Add a dedicated helper to perform stricter validation of $INDEX_ROOT and use it for both directory inodes and named index inodes. This keeps the root size and header geometry checks consistent across both read paths. | ||||
| CVE-2026-72206 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate index block header more strictly Modify ntfs_index_block_inconsisent() to perform stricter validation of INDEX_HEADER geometry in INDX blocks, and update ntfs_lookup_inode_by_name() to use that function to validate INDX blocks. | ||||
| CVE-2026-72209 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate attribute values on lookup ntfs_attr_find() and ntfs_external_attr_find() check that generic resident attribute values fit in their attribute records and that fixed-size resident values are large enough. For variable-length resident formats, however, the fixed part is not enough: embedded length fields can still point callers past the resident value. A crafted image can set a small resident $FILE_NAME value_length while leaving file_name_length large. Callers then trust file_name_length and read past the resident value when converting or comparing the name. This was reproduced with a crafted image under KASAN as a slab-out-of-bounds read from the kmalloc-1k MFT record copy. The stack included ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(), ntfs_ucstonls(), and utf16s_to_utf8s(). Add a shared attribute value validator and use it before a lookup path can return an attribute, including the AT_UNUSED enumeration case where callers inspect returned attributes directly. The helper validates resident value bounds, minimum resident value sizes, variable-length $FILE_NAME fields, and non-resident mapping-pairs metadata that was previously checked separately in both lookup paths. This also preserves the intended resident @val matching semantics in the external attribute lookup path. The old duplicated validation block overwrote the actual resident value length with the type-specific minimum length before comparing @val, so variable-length resident values could fail to match even when the bytes were identical. Keep the comparison on the actual value length, and make ntfs_attrlist_entry_add() compare resident attributes with lowest_vcn zero instead of reading the non-resident union member after a successful resident match. Reject non-resident $FILE_NAME records too: the format requires $FILE_NAME to be resident and callers treat returned records as resident. | ||||
| CVE-2026-72210 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one in mapping pairs decoding bounds checks In ntfs_mapping_pairs_decompress(), attr_end points one byte past the end of the attribute record: attr_end = (u8 *)attr + le32_to_cpu(attr->length); The two bounds checks validating that mapping pair data bytes fit within the attribute use strict greater-than (>), which allows a one-byte out-of-bounds read when the data extends exactly to attr_end: b = *buf & 0xf; if (b) { if (unlikely(buf + b > attr_end)) // off-by-one goto io_error; for (deltaxcn = (s8)buf[b--]; b; b--) deltaxcn = (deltaxcn << 8) + buf[b]; } When buf + b == attr_end, the check evaluates to false and buf[b] reads one byte past the valid attribute boundary. The same pattern appears in the LCN delta bytes check. Fix both checks to use >= so that buf[b] at exactly attr_end is correctly rejected as out of bounds. | ||||
| CVE-2026-8836 | 2 Lwip, Lwip-tcpip | 2 Lwip, Lwip | 2026-08-22 | 9.8 Critical |
| A vulnerability was found in lwIP up to 2.2.1. Affected is the function snmp_parse_inbound_frame of the file src/apps/snmp/snmp_msg.c of the component snmpv3 USM Handler. Performing a manipulation of the argument msgAuthenticationParameters results in stack-based buffer overflow. The attack may be initiated remotely. The patch is named 0c957ec03054eb6c8205e9c9d1d05d90ada3898c. It is suggested to install a patch to address this issue. Two separate issue reports were submitted to the project. Their processing was merged as a duplicate. | ||||
| CVE-2026-72227 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: avoid OOB read of num_dests header Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is attempted to check whether enough space is actually in the network header. But instead of using offsetofend() to check for the whole size (2) which must be accessible, offsetof() of is called. The latter is always returning 0. The comparison with the network header length will always return that enough data is available - even when only 1 or 0 bytes are accessible. Instead of using offsetofend(), use the more common check for the whole header. | ||||
| CVE-2026-72241 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: leds: uleds: Fix potential buffer overread The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated. | ||||
| CVE-2026-72314 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code. | ||||