Export limit exceeded: 26162 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26162 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63961 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: validate count before reading Status Update VDO A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object. | ||||
| CVE-2026-63907 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in probe(), but then calls kfree(udev) both on the probe() error path (label out_free) and again in remove(). Because devm_kzalloc() allocations are devres-managed and are freed automatically when the device is detached (including after a failing probe() and during driver unbind), the explicit kfree() can lead to a double free. If probe() fails after devm_kzalloc(), the error path frees udev and devres cleanup will free it again when the core unwinds the partially bound device. On normal driver removal, remove() frees udev and devres will free it again when the device is detached. This issue was identified by a static analysis tool I developed and confirmed by manual review. Fix by removing the manual kfree() calls and dropping the now-unused label. | ||||
| CVE-2026-63908 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=. | ||||
| CVE-2026-63909 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops Commit d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") introduced a transposed bounds check: if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE) Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates to `aces_size < 0`. Because `aces_size` is always non-negative, this check becomes dead code and never breaks the loop. Worse, that commit removed the old 4-byte guard, meaning the loop now reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation during subsequent SMB2_CREATE operations. Fix this by properly transposing the comparison to require at least 16 bytes (8-byte offset + 8-byte SID base), matching the correct form used in smb_inherit_dacl(). | ||||
| CVE-2026-63910 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: fix UAF in dma_buf_fd() tracepoint Once FD_ADD() returns, the fd is live in the file descriptor table and a thread sharing that table can close() it before DMA_BUF_TRACE() runs. The close drops the last reference, __fput() frees the dma_buf, and the tracepoint then dereferences dmabuf to take dmabuf->name_lock -- slab-use-after-free. Split FD_ADD() back into get_unused_fd_flags() + fd_install() and emit the tracepoint between them. While the fdtable slot is reserved with a NULL file pointer, a racing close() returns -EBADF without entering __fput(), so the dma_buf stays alive across the trace. Same approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put() tracepoint"). This undoes the FD_ADD() conversion done in commit 34dfce523c90 ("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to hook the tracepoint safely. | ||||
| CVE-2026-63911 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: reset runtime state when cloning SAs iptfs_clone_state() clones the IPTFS mode data with kmemdup(). This copies runtime objects which must not be shared with the original SA, including the embedded sk_buff_head, hrtimers, spinlock, and in-flight reassembly/reorder state. If xfrm_state_migrate() fails after clone_state() but before the later init_state() call has reinitialized those fields, the cloned state can be destroyed by xfrm_state_gc_task() with list and timer state copied from the original SA. With queued packets this lets the clone splice and free skbs owned by the original IPTFS queue, leading to use-after-free and double-free reports in iptfs_destroy_state() and skb release paths. Reinitialize the clone's runtime state before publishing it through x->mode_data. Because clone_state() now publishes a destroyable mode_data object before init_state(), take the mode callback module reference there. Avoid taking it again from __iptfs_init_state() for the same object. | ||||
| CVE-2026-63918 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname A reader in l2tp_session_get_by_ifname() can return a pointer to a session whose refcount has reached zero. The getter takes its reference with plain refcount_inc(), but every other session getter in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the corresponding _get_next variants) uses refcount_inc_not_zero() because the IDR/RCU lookup can race with refcount_dec_and_test() -> l2tp_session_free() -> kfree_rcu(). The ifname getter is the only outlier; the inconsistency was raised on-list after 979c017803c4 ("l2tp: use list_del_rcu in l2tp_session_unhash"). A reader inside rcu_read_lock_bh() that matches session->ifname can be preempted between the strcmp() and the refcount_inc(). If the last reference drops on another CPU in that window, the reader's refcount_inc() runs on a counter that has reached zero. refcount_t catches the addition-on-zero, prints "refcount_t: addition on 0; use-after-free", saturates the counter, and returns the saturated pointer to the caller. Session memory is held live by the in-flight RCU read section, but the kfree_rcu() callback queued from l2tp_session_free() will free it once the grace period closes; a caller that dereferences the returned session past that point hits a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU sleeping lock and the preemption window is real; on stock PREEMPT kernels local_bh_disable() is a preempt_count increment that closes the cross-CPU race in practice (see below). Use refcount_inc_not_zero() and continue the list walk on failure, matching the other session getters in the file. The ifname getter is the only session getter in net/l2tp/ that still uses the bare refcount_inc() pattern; this change restores file-internal consistency. The success path is unchanged. | ||||
| CVE-2026-63928 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: omninet: fix memory corruption with small endpoint Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected. | ||||
| CVE-2026-63929 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf() iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes, kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial kref to 1. It then calls dma_resv_add_fence() which takes a second reference (kref=2), and stores a raw pointer in block->fence. On the success path the function returns without calling dma_fence_put() to release the initial reference, so every buffer enqueue permanently leaks one kmalloc-128 allocation. The iio_buffer_cleanup() work item only releases the temporary reference taken during completion signalling by iio_buffer_signal_dmabuf_done(); the initial reference from dma_fence_init() is never released. With four iio_rwdev instances at 240kHz and 512 samples per buffer, this produces ~1875 kmalloc-128 allocations per second matching the observed slab growth exactly. A test with ftrace confirmed that the dma_fence_destroy event was never triggered. Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring ownership of the fence to the DMA reservation object. The DMA fence then gets properly discarded after being signalled. | ||||
| CVE-2026-63930 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: fix use-after-free in error path In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe(). | ||||
| CVE-2026-63931 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: fix division by zero in write_raw Add a zero check for val2 before using it as a divisor when setting the sampling frequency. A user writing a zero fractional part to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. | ||||
| CVE-2026-63932 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: mhz19b: reject oversized serial replies mhz19b_receive_buf() appends each serdev chunk into the fixed MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without checking that the chunk fits in the remaining space. A large callback can therefore overflow st->buf before the command path validates the reply. Reset the reply state before each command and reject oversized serial replies before copying them into the fixed buffer. When an oversized reply is detected, wake the waiter and report -EMSGSIZE instead of overwriting st->buf. | ||||
| CVE-2026-63933 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16260: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. | ||||
| CVE-2026-63934 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: itg3200: fix i2c read into the wrong stack location itg3200_read_all_channels() takes `__be16 *buf' as a parameter and fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the parameter (a pointer), `&buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch. i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak. The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct. Drop the spurious `&' so the i2c read writes into the caller's buffer. | ||||
| CVE-2026-63935 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: nxp-sar-adc: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero or a negative value to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. Also prevent unsigned integer underflow when the computed cycle count is smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to a huge value. | ||||
| CVE-2026-63936 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: mt6359: fix unchecked return value in mt6358_read_imp In mt6358_read_imp(), the variable val_v is passed to regmap_read() but the return value is not checked. If the read fails, val_v remains uninitialized and its random stack content is subsequently reported as a measurement result. Initialize val_v to zero to ensure a predictable value is reported in case of bus failure and to prevent potential stack data leakage. This also satisfies static analyzers that might otherwise flag the variable as used uninitialized. | ||||
| CVE-2026-63943 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length. | ||||
| CVE-2026-63948 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return. | ||||
| CVE-2026-63949 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio. | ||||
| CVE-2026-63950 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one Initialize nr_pages to 1 at the start of each loop iteration, like folio_referenced_one() does. Without this, nr_pages computed by a previous folio_unmap_pte_batch() call can be reused on a later iteration that does not run folio_unmap_pte_batch() again. mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call madvise(MADV_FREE), then make the last page device-exclusive via HMM_DMIRROR_EXCLUSIVE. Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will first clear the first 15 out of 16 entries mapping the lazyfree folio. This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets reused on a device-exclusive pte, thus potentially corrupting folio refcount/mapcount. At the moment, I have a userspace program which can make the kernel spit out a trace, but the blow up is in folio_referenced_one(), because there are existing bugs in the interaction between device-private and rmap (which too I am investigating). I did a one liner kernel change to avoid going into folio_referenced_one(), and the kernel blows up at folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted. Note that the bug is there not since file folio batching but lazyfree folio batching, since device-exclusive only works for anonymous folios. Userspace visible effect is simply kernel crashing somewhere due to refcount/mapcount corruption. | ||||