Export limit exceeded: 419215 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 108443 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (108443 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90260 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't clobber the extent buffer when zeroing it out On a zoned filesystem a freed-but-still-dirty tree block is written out as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write pointer advancing. btree_csum_one_bio() implemented this by memzeroing the extent buffer's own folios before submission. That destroys the in-memory buffer while it may still be referenced. In particular btrfs_free_tree_block() can run on it afterwards and reads the header to add a delayed reference; once the header has been zeroed it frees bytenr 0 and corrupts the extent tree (the btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an "unable to find ref" abort). It is flaky and reproduces under fsstress, e.g. generic/461 and generic/013. Write the zeros to disk from the shared zero page instead and leave the extent buffer content untouched, so any later reference - including the delayed reference from btrfs_free_tree_block() - still sees a valid header. end_bbio_meta_write() now clears writeback on the buffer's own folios, as the bio no longer carries them. | ||||
| CVE-2026-90256 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind hci_conn::l2cap_data is accessed without locks in l2cap_disconn_ind via hci_conn_timeout (disc_work) -> hci_proto_disconn_ind -> l2cap_disconn_ind. This is UAF if the l2cap_conn is deleted concurrently. disc_work is disabled sync in hci_conn_del(), so we cannot take hci_dev_lock in disc_work. Fix by using proto_lock to guard l2cap_data, in addition to hdev->lock which is held in other access paths. | ||||
| CVE-2026-90240 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush context cache with correct SID when tearing down aliases domain_context_clear_one() and device_pasid_table_teardown() are both invoked once per DMA alias of a device. Each function locates the context entry using the bus/devfn pair provided by the pci_for_each_dma_alias() callback, then calls intel_context_flush_no_pasid(), which constructs a device-selective context-cache invalidation from info->bus and info->devfn (that is, always the requester ID of the device itself). As a result, for every alias other than the device’s own RID, the context entry that was just cleared in memory is never invalidated in the context cache. Hardware may continue using that stale cached entry. In the scalable-mode teardown path, intel_pasid_free_table() can then free the PASID directory still referenced by that stale entry, allowing the IOMMU to walk freed memory. Fix this by passing the source ID of the entry being torn down to intel_context_flush_no_pasid(), instead of deriving it from @info. | ||||
| CVE-2026-90231 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix unconfined user namespace restriction forced stack If a task is already confined by a stack the unprivileged transition restriction on unconfined is not correctly, applied. This results in an escape if two transitions through an unconfined profile can be executed. Fix this by pushing the check into the per profile label build. The check will always be done against unconfined and result in a stack of just the unconfined component when necessary. | ||||
| CVE-2026-90217 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Compare iterator types during state pruning An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states must not be equal, or the verifier can prune an unsafe path. Compare the pointer type for STACK_ITER slots. | ||||
| CVE-2026-90177 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check pointer type for all atomic RMW paths Atomic RMW verification records an instruction pointer type only when the current destination is PTR_TO_ARENA. A second path can therefore reach the same instruction with an ordinary pointer without comparing it against the saved arena type. The post-verification fixup uses the saved type to rewrite the instruction to BPF_PROBE_ATOMIC for every path. Record the actual destination type for all atomic RMW paths so the existing mismatch check rejects incompatible uses of one instruction. | ||||
| CVE-2026-90142 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256 | ||||
| CVE-2026-90030 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations. | ||||
| CVE-2026-89929 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU When emulating INVVPID, KVM executes INVVPID on the physical CPU using vpid02 (instead of the L1 assigned VPID), after doing some validations on the operands. However, it is possible that the physical CPU KVM executes INVVPID on is different from the CPU L2 is running on. For example, in the following scenario: - L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1) - L1 migrates to CPU #2 and executes INVVPID - KVM executes INVVPID on CPU #2 - L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02.cpu=1) The TLB entries on CPU #1 are never invalidated, because INVVPID was executed on CPU #2, and vmcs02 never ran on a different pCPU (i.e. vmx_vcpu_load_vmcs() will *not* request KVM_REQ_TLB_FLUSH). Ensure that INVVPID is being executed on the same pCPU that L2 last ran on, and if not, fallback to clearing last_vpid=0 to trigger a full VPID flush on the next nested VM-Enter (as KVM will detect L1 using a different VPID for L2). If L2 ends up running on a different pCPU, KVM will flush the TLB anyway through vmx_vcpu_load_vmcs(). | ||||
| CVE-2026-89913 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each() and dereferences the returned struct vgic_irq in the loop body without holding a reference on the LPI. The xarray iterator only provides temporary RCU coverage while looking up the current entry. That is not sufficient for this loop body, which reads fields from struct vgic_irq and performs guest memory accesses before the iteration completes. A concurrent path can trigger this race: the irqfd cached injection path (vgic_its_inject_cached_translation) obtains a transient LPI reference via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex, config_lock, or its_lock. If guest ITS DISCARD then drops the cache and ITE references under its_lock, the transient inject reference may become the final one. When vgic_put_irq() drops it, the LPI is erased from lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables() may still hold a stale pointer obtained from the xarray iterator and dereference it after the RCU grace period completes. Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes a stable reference, and dropping it with vgic_put_irq() on all paths. This matches the pattern already used by other lpi_xa iterators in the vgic ITS code. | ||||
| CVE-2026-89906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Refactor jump offset calculation in tail call The old macro-based jmp_offset calculation derives the jump distance from a stale prior-pass code stride, which can lead to wrong branch offsets and soft lockups under extra JIT passes. Fix this by calculating the offset directly on the absolute target: "ctx->offset[insn + 1] - ctx->idx". To avoid a false 16-bit range check abort during size estimation, add a "ctx->image == NULL" guard to inject a safe dummy offset. | ||||
| CVE-2026-89806 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation The framebuffer size calculation `fb_size = linebytes * height` can overflow when both values are large (e.g., 46341 * 46341 > INT_MAX). Since linebytes and height are both int types, the multiplication is performed as int * int, which results in undefined behavior on overflow. Use check_mul_overflow() to detect and prevent this overflow, consistent with the approach used in simpledrm.c and corebootdrm.c. | ||||
| CVE-2026-89755 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: clear stale mapping after freeing swapcache __migrate_device_pages() reads the folio mapping before calling folio_free_swap(). When folio_free_swap() succeeds, the folio is removed from the swap cache, but the saved mapping still points to swap_space. Passing the stale mapping to folio_migrate_mapping() makes it use the mapped-folio path for a folio that is no longer in swapcache. It can then operate on swap_space.i_pages with invalid reference accounting, eventually triggering a folio reference count BUG. After a successful split, nr still contains the number of pages in the original large folio, although each resulting page is now a separate order-0 folio. Reset nr to 1 so each split folio is processed separately, including its own swapcache removal and mapping lookup. Refresh the saved mapping after folio_free_swap() so the current folio state is used during migration. | ||||
| CVE-2026-80614 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: emac: Fix NULL pointer dereference in emac_probe Move devm_request_irq() after devm_platform_ioremap_resource() so that dev->emacp is mapped before the interrupt handler can fire. An early interrupt hitting emac_irq() would dereference the NULL dev->emacp and crash. Also remove redundant error message. devm_platform_ioremap_resource() already returns an error message with dev_err_probe(). | ||||
| CVE-2026-74711 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix type confusion in notification logic Sashiko reports: At the start of the loop in pmbus_notify(), the code unconditionally casts every attribute to a struct sensor_device_attribute: drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() { for (i = 0; i < data->num_attributes; i++) { struct device_attribute *da = to_dev_attr(data->group.attrs[i]); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int index = attr->index; ... } However, data->group.attrs can contain other types like struct pmbus_samples_reg or struct pmbus_sensor, which only embed a base struct device_attribute. If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting it to struct sensor_device_attribute and reading the index field appears to access memory past the end of the allocation, which might trigger a slab-out-of-bounds read. Additionally, if da is a struct pmbus_sensor, casting it causes the index field to overlap with the page, phase, and reg fields. Could this produce a garbage mask on little-endian systems that spuriously matches the target reg, page, and flags during an alert? Fix the problem by using struct sensor_device_attr in struct pmbus_sensor and struct pmbus_label. Since those attributes never trigger a notification, set the value of attr->index to -1 for them. Use this value to distinguish from boolean attributes which _can_ trigger a notification and use the index field to encode mask, page, and register values. | ||||
| CVE-2026-74697 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Disable EOP for TPA on all chips to prevent data corruption EOP (End of frame padding) on the AGG ring may cause overlapping of zero padding at the end of one segment with the next segment's data. If Relaxed Ordering (RO) is enabled, the zero padding may overwrite valid data in the next segment and corrupt the data. Older chips (P5 and older) do not automatically disable RO when EOP is enabled. On some ARM systems, data corruption was reported on 57508 (P5) chips with RO enabled. Always disable EOP on all chips on the AGG rings when TPA is enabled to fix the data corruption. | ||||
| CVE-2026-74605 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Use children field for rcu head and add memory barriers When an eventfs inode is freed, it sets ei->is_freed and then uses its ei->list to add it to the srcu link list as the list field is a union with the rcu list head. As the ei->list is used to iterate over an SRCU protected list without taking the eventfs_mutex, there's nothing stopping the iteration over that list to see the ei->rcu instead of the ei->list and it will read a corrupt target. To fix this, change the union of the rcu list head with the children list. On freeing the eventfs inode, set the is_free and execute a smp_wmb() before adding the eventfs inode to the SRCU list. On iteration of the ei->children list, at the start, execute a smp_rmb() and then read the is_freed of the ei to see if the children list is still valid. If is_freed is set, then the ei_child read is not valid and the loop should exit immediately. | ||||
| CVE-2026-74533 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero hci_conn::iso_data is accessed and modified without lock or RCU. This leads to a race [Task hdev->workqueue] [Task 2] iso_recv iso_conn_put(conn) conn = LOAD hcon->iso_data iso_conn_free(conn) iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL kfree(conn) kref_get_unless_zero(&conn->ref) /* UAF */ and also to races in iso_conn_add() vs. iso_conn_free(). Fix by adding spinlock hci_conn::proto_lock and using it to guard hci_conn::iso_data. | ||||
| CVE-2026-74513 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb() look up the dmb_node under dmb_ht_lock, drop the lock and only then operate on the node's refcount. Nothing keeps the node alive across that window: __dibs_lo_unregister_dmb() removes the node from the hash table under the write lock and immediately frees it. A concurrent final put can therefore free the node between the lookup and the refcount operation: CPU0 (attach) CPU1 (owner unregisters) read_lock_bh(&dmb_ht_lock) find dmb_node (refcnt == 1) read_unlock_bh(&dmb_ht_lock) refcount_dec_and_test() 1 -> 0 write_lock_bh(&dmb_ht_lock) hash_del(&dmb_node->list) write_unlock_bh(&dmb_ht_lock) kfree(dmb_node) refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free The same window exists for the refcount_dec_and_test() calls in the detach and unregister paths. Close the race structurally by making hash table membership and the refcount transitions atomic with respect to each other: - Perform the final refcount_dec_and_test() and hash_del() in a single dmb_ht_lock write-side critical section, in both the unregister and the detach path. Freeing the node still happens after the lock is dropped, which is safe because a node whose refcount reached zero has left the hash table and can no longer be found. - This establishes the invariant that any node found in the hash table holds at least one reference, and that the final reference can only be dropped under the write lock. dibs_lo_attach_dmb() can thus take its reference with a plain refcount_inc() while still holding the read lock; refcount_inc_not_zero() is no longer needed. __dibs_lo_unregister_dmb() no longer touches the hash table and is renamed to dibs_lo_free_dmb() accordingly. Note: commit cc21191b584c ("dibs: Move data path to dibs layer") moved the code to its current location; the race was introduced earlier by commit c3a910f2380f ("net/smc: implement DMB-merged operations of loopback-ism"). Tested SMC-D via ISM and dibs loopback. | ||||
| CVE-2026-74449 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. If num_mcaches or mvmpg_width/height is zero, return a false. Callers will propagate the failure as a rejected mode, which prevents the panic. (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) | ||||