Export limit exceeded: 108443 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (108443 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38303 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix possible crashes on eir_create_adv_data eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER without checking if that would fit. | ||||
| CVE-2025-23133 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: update channel list in reg notifier instead reg worker Currently when ath11k gets a new channel list, it will be processed according to the following steps: 1. update new channel list to cfg80211 and queue reg_work. 2. cfg80211 handles new channel list during reg_work. 3. update cfg80211's handled channel list to firmware by ath11k_reg_update_chan_list(). But ath11k will immediately execute step 3 after reg_work is just queued. Since step 2 is asynchronous, cfg80211 may not have completed handling the new channel list, which may leading to an out-of-bounds write error: BUG: KASAN: slab-out-of-bounds in ath11k_reg_update_chan_list Call Trace: ath11k_reg_update_chan_list+0xbfe/0xfe0 [ath11k] kfree+0x109/0x3a0 ath11k_regd_update+0x1cf/0x350 [ath11k] ath11k_regd_update_work+0x14/0x20 [ath11k] process_one_work+0xe35/0x14c0 Should ensure step 2 is completely done before executing step 3. Thus Wen raised patch[1]. When flag NL80211_REGDOM_SET_BY_DRIVER is set, cfg80211 will notify ath11k after step 2 is done. So enable the flag NL80211_REGDOM_SET_BY_DRIVER then cfg80211 will notify ath11k after step 2 is done. At this time, there will be no KASAN bug during the execution of the step 3. [1] https://patchwork.kernel.org/project/linux-wireless/patch/20230201065313.27203-1-quic_wgong@quicinc.com/ Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 | ||||
| CVE-2025-21976 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: hyperv_fb: Allow graceful removal of framebuffer When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to release the framebuffer forcefully. If this framebuffer is in use it produce the following WARN and hence this framebuffer is never released. [ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40 < snip > [ 44.111289] Call Trace: [ 44.111290] <TASK> [ 44.111291] ? show_regs+0x6c/0x80 [ 44.111295] ? __warn+0x8d/0x150 [ 44.111298] ? framebuffer_release+0x2c/0x40 [ 44.111300] ? report_bug+0x182/0x1b0 [ 44.111303] ? handle_bug+0x6e/0xb0 [ 44.111306] ? exc_invalid_op+0x18/0x80 [ 44.111308] ? asm_exc_invalid_op+0x1b/0x20 [ 44.111311] ? framebuffer_release+0x2c/0x40 [ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb] [ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus] [ 44.111323] device_remove+0x40/0x80 [ 44.111325] device_release_driver_internal+0x20b/0x270 [ 44.111327] ? bus_find_device+0xb3/0xf0 Fix this by moving the release of framebuffer and assosiated memory to fb_ops.fb_destroy function, so that framebuffer framework handles it gracefully. While we fix this, also replace manual registrations/unregistration of framebuffer with devm_register_framebuffer. | ||||
| CVE-2025-21825 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT During the update procedure, when overwrite element in a pre-allocated htab, the freeing of old_element is protected by the bucket lock. The reason why the bucket lock is necessary is that the old_element has already been stashed in htab->extra_elems after alloc_htab_elem() returns. If freeing the old_element after the bucket lock is unlocked, the stashed element may be reused by concurrent update procedure and the freeing of old_element will run concurrently with the reuse of the old_element. However, the invocation of check_and_free_fields() may acquire a spin-lock which violates the lockdep rule because its caller has already held a raw-spin-lock (bucket lock). The following warning will be reported when such race happens: BUG: scheduling while atomic: test_progs/676/0x00000003 3 locks held by test_progs/676: #0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830 #1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500 #2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0 Modules linked in: bpf_testmod(O) Preemption disabled at: [<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500 CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ #11 Tainted: [W]=WARN, [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)... Call Trace: <TASK> dump_stack_lvl+0x57/0x70 dump_stack+0x10/0x20 __schedule_bug+0x120/0x170 __schedule+0x300c/0x4800 schedule_rtlock+0x37/0x60 rtlock_slowlock_locked+0x6d9/0x54c0 rt_spin_lock+0x168/0x230 hrtimer_cancel_wait_running+0xe9/0x1b0 hrtimer_cancel+0x24/0x30 bpf_timer_delete_work+0x1d/0x40 bpf_timer_cancel_and_free+0x5e/0x80 bpf_obj_free_fields+0x262/0x4a0 check_and_free_fields+0x1d0/0x280 htab_map_update_elem+0x7fc/0x1500 bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43 bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e bpf_prog_test_run_syscall+0x322/0x830 __sys_bpf+0x135d/0x3ca0 __x64_sys_bpf+0x75/0xb0 x64_sys_call+0x1b5/0xa10 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... </TASK> It seems feasible to break the reuse and refill of per-cpu extra_elems into two independent parts: reuse the per-cpu extra_elems with bucket lock being held and refill the old_element as per-cpu extra_elems after the bucket lock is unlocked. However, it will make the concurrent overwrite procedures on the same CPU return unexpected -E2BIG error when the map is full. Therefore, the patch fixes the lock problem by breaking the cancelling of bpf_timer into two steps for PREEMPT_RT: 1) use hrtimer_try_to_cancel() and check its return value 2) if the timer is running, use hrtimer_cancel() through a kworker to cancel it again Considering that the current implementation of hrtimer_cancel() will try to acquire a being held softirq_expiry_lock when the current timer is running, these steps above are reasonable. However, it also has downside. When the timer is running, the cancelling of the timer is delayed when releasing the last map uref. The delay is also fixable (e.g., break the cancelling of bpf timer into two parts: one part in locked scope, another one in unlocked scope), it can be revised later if necessary. It is a bit hard to decide the right fix tag. One reason is that the problem depends on PREEMPT_RT which is enabled in v6.12. Considering the softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced in v5.15, the bpf_timer commit is used in the fixes tag and an extra depends-on tag is added to state the dependency on PREEMPT_RT. Depends-on: v6.12+ with PREEMPT_RT enabled | ||||
| CVE-2026-83899 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-21 | 7 High |
| Improper privilege management in Windows Installer allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83900 | 1 Microsoft | 12 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 9 more | 2026-10-21 | 7 High |
| Use after free in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-98156 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected. | ||||
| CVE-2026-98073 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: Remove conflicting altnames for dying netns in __dev_change_net_namespace(). syzbot reported the warning in cfg80211_pernet_exit(). [0] The repro does the following: 1. create two device in root netns and non-root netns 2. assign the same altname for the two devices 3. remove the non-root netns Since commit 7663d522099e ("net: check for altname conflicts when changing netdev's netns"), cfg80211_switch_netns() and cfg802154_switch_netns() fail if init_net has a device with the conflicting altname. default_device_exit_net() had the same issue and commit d09486a04f5d ("net: fix removing a namespace with conflicting altnames") fixed it. cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix. Let's generalise the fix by removing conflicting altnames for dying netns in __dev_change_net_namespace(). [0]: cfg80211_switch_netns(rdev, &init_net) WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160 Modules linked in: CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026 Workqueue: netns cleanup_net RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871 Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293 RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000 RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000 RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000 R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000 R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20 FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0 Call Trace: <TASK> ops_exit_list net/core/net_namespace.c:200 [inline] ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253 cleanup_net+0x572/0x810 net/core/net_namespace.c:706 process_one_work kernel/workqueue.c:3387 [inline] process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551 kthread+0x38b/0x480 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-98056 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: remove stale namespaces by NSID range during scan nvme_scan_ns_list() drops the stale namespaces in each gap in the reported NSID list one NSID at a time. Every iteration calls nvme_find_get_ns() to look the namespace up and removes it if it is present. The loop runs once per NSID in the gap rather than once per namespace actually present. NSIDs are 32-bit, so a target with a sparse NSID space can make a single gap spin the loop billions of times with nothing to remove. watchdog: BUG: soft lockup - CPU#4 stuck for 26s! Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:__srcu_read_unlock+0xb/0x20 Call Trace: nvme_find_get_ns+0x7d/0xb0 [nvme_core] nvme_scan_ns_list+0xe8/0x280 [nvme_core] nvme_scan_work+0x18a/0x280 [nvme_core] process_one_work+0x197/0x380 worker_thread+0x2fe/0x410 kthread+0xe0/0x100 Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range() and give it an open (start, end) NSID range. ctrl->namespaces is sorted by NSID, so the whole gap is dropped in a single walk that stops once end is reached. This bounds the work by the namespaces that are present instead of by the size of the gap. | ||||
| CVE-2026-98048 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: don't rewrite bpf_fastcall patterns entered by a jump mark_fastcall_pattern_for_call() must ensure that matched "spill; call; fill" instruction series is not interrupted by a jump. Otherwise the rewrite applied by bpf_remove_fastcall_spills_fills() is not sound. Record the instructions targeted by jumps in insn_aux_data[*].jump_target when the CFG is built and use this flag to stop growing a pattern at such an instruction. Jumps to the first spill are fine. Note that existing insn_aux_data[*].jmp_point field can't be reused, as it marks subprogram return instructions. | ||||
| CVE-2026-98047 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check ancestor frames for rbtree callbacks bpf_rbtree_add() invokes its comparator while the caller holds the root lock. The native insertion code retains raw parent and link pointers across the callback, so the verifier prohibits unlocking, consuming tree nodes, or changing RCU state from that callback. in_rbtree_lock_required_cb() only checks the innermost verifier frame. Static subprogram calls are permitted while holding a spin lock, and such a call pushes a frame without in_callback_fn set. Consequently, all callback restrictions disappear in the nested frame. The subprogram can unlock the tree, remove and drop the node being compared, then relock. Native insertion resumes with the stale parent pointer and links freed memory into the tree. Walk all active frames for the rbtree callback instead. Benign static subprograms remain permitted, while callback restrictions follow execution into nested frames. | ||||
| CVE-2026-98041 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't predict JMP32 pointer vs zero comparisons Consider the following program: r1 = map_value; /* low 32 bits are zero at runtime */ r6 = 0xdead000000000000; if w1 != 0 goto l1; l0: r1 += r6; r2 = *(u64 *)(r1 + 0); exit; l1: r6 = 0; goto l0; At the moment is_branch_taken() reports the jump as always taken, because it does not distinguish between BPF_JMP and BPF_JMP32 comparisons when processing 'if w1 != 0 ...'. | ||||
| CVE-2026-98034 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark NULL kptr stores precise check_map_kptr_access() permits a scalar store into an untrusted kptr field only when the register is known to contain zero. Unlike other verifier checks whose outcome depends on a scalar value, it does not mark that register precise. A state checkpoint reached with an imprecise zero can therefore prune a second path that reaches the store with an arbitrary nonzero scalar. The program can write attacker-controlled bits into the kptr field and load them back as a PTR_TO_BTF_ID. Call mark_chain_precision() before accepting a known-zero register. This forces state equivalence to compare its scalar range and makes the verifier visit and reject a path carrying a nonzero value. | ||||
| CVE-2026-98033 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve inner map identity in callback frames Callback frame constructors initialize map-typed argument registers with __mark_reg_known_zero() and then restore map_ptr. This clears map_uid, which is the only field distinguishing inner maps that share an inner_map_meta template. When a timer callback invokes bpf_for_each_map_elem() on a second inner map, both the saved first map and the second map value can reach the nested callback as the same template with map_uid zero. bpf_timer_init() then accepts pairing the timer from the second map with the first map. The runtime records the first map in the timer without taking a reference. Freeing that map does not find the timer stored in the second map, so a later timer callback dereferences the freed map. Copy map_uid from the same caller register as map_ptr when constructing for-each, timer/workqueue, and task-work callback arguments. The existing identity check can then reject mismatched inner maps while allowing a callback value to be paired with its actual map. | ||||
| CVE-2026-98032 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix subbuf resize races with trace_pipe_raw readers Concurrent subbuffer resizes may crash trace_pipe_raw readers or leak uninitialized memory to userspace due to stale size values. Modify ring_buffer_alloc_read_page() to handle the resizing of an existing buffer_data_read_page if necessary and add a new ring_buffer_read_page_size(). This new function enables ring-buffer buffer_data_read_page users to not call the racy ring_buffer_subbuf_size_get(). This makes the spare_size member of ftrace_buffer_info redundant. Finally, handle buffer_data_read_page/reader_page order discrepancy in ring_buffer_read_page(). On a mismatch simply copy manually the data to the buffer_data_read_page. | ||||
| CVE-2026-97988 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: invalidate vring access on IOTLB transitions When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB metadata are interpreted in a different address space. Keeping them across the transition can leave stale ring mappings in use. Clearing d->iotlb before taking the VQ locks also lets a worker observe a transient NULL d->iotlb and fall back to d->umem while translating a descriptor. Add a common vhost_clear_device_iotlb() helper for vhost-net and vhost-vsock. Take all VQ mutexes in index order before dropping the device-wide IOTLB, invalidate each VQ's cached ring access and metadata, clear pending IOTLB messages, and free the old table after the handoff. This serializes the transition with workers and prevents mixed address space mappings. On the first direct-to-IOTLB transition, invalidate the cached vring addresses. When an existing device IOTLB is replaced, preserve the GIOVA ring addresses and reset only the metadata cache. After clearing ACCESS_PLATFORM, userspace must configure the vring addresses for the new address mode. vhost_vq_invalidate_access() clears desc, avail, and used together. Treat the VQ as invalidated only when all three are NULL, since a single GIOVA address may legitimately be zero. | ||||
| CVE-2026-97975 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del() A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_find_any_child() and calls device_move() to reparent it to NULL, which removes the node from its parent's klist and clears knode_parent. Subsequently, device_del() calls klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing klist_put() to dereference knode_klist(n)->put on an already removed node, resulting in a NULL pointer dereference. This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()"), which replaced device_find_child(..., __match_tty) with device_find_any_child() in hci_conn_del_sysfs(). That change was intended to avoid a use-after-free where conn->dev outlived its parent hdev->dev when child devices held references to conn->dev, because conn->dev only held a reference to hdev->dev while registered in sysfs. Fix the issue properly by taking an explicit reference to the parent device with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with put_device(parent) in bt_link_release() when the conn device is freed. This ensures that hdev->dev remains valid for the entire lifecycle of conn->dev, resolving the underlying use-after-free. With the parent reference held properly, restore the __match_tty filter in hci_conn_del_sysfs() so that device_move() is only invoked on persistent RFCOMM TTY devices as originally intended, eliminating the race condition with unregistering network devices. | ||||
| CVE-2026-97965 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and VXLAN_F_GBP, and a packet is transmitted through it using an external ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left pointing to the uninitialized _md stack variable: if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) { if (info->options_len < sizeof(*md)) goto drop; md = ip_tunnel_info_opts(info); } Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains pointing to _md. Later, vxlan_build_skb() is called with md, which eventually calls vxlan_build_gbp_hdr(): if (vxflags & VXLAN_F_GBP) vxlan_build_gbp_hdr(vxh, md); Inside vxlan_build_gbp_hdr(), md->gbp is read: if (!md->gbp) return; gbp = (struct vxlanhdr_gbp *)vxh; ... if (md->gbp & VXLAN_GBP_DONT_LEARN) gbp->dont_learn = 1; If the stack contains garbage, this causes: 1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header. 2) gbp->dont_learn and gbp->policy_applied to be set from stack bits. 3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data, leaking it onto the wire. Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early without modifying the VXLAN header. | ||||
| CVE-2026-97953 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TX descriptor availability check for TSO traffic stmmac_tso_xmit() estimates the number of free TX descriptors required by a TSO skb as: (skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1 which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This underestimates the descriptors actually consumed by stmmac_tso_allocator(), since each fragment is mapped individually and so it needs at least one descriptor regardless of its size. Moreover, one descriptor is used for the L2/L3/L4 headers and, when the MSS changes, one more is consumed for the MSS context descriptor. For a highly fragmented TSO skb the check can therefore pass even when the ring has too few free slots. stmmac_tso_allocator() then writes past the available descriptors, overwriting descriptors still owned by the DMA engine, corrupting the TX ring. Add stmmac_tso_get_num_desc() to compute the exact number of descriptors needed for the header, the linear payload and each fragment, plus the MSS context descriptor when required, and use it in the availability check. | ||||
| CVE-2026-97949 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs: unhash the dentry before dropping the item in rmdir configfs_get_config_item() treats a hashed dentry as proof that sd->s_element is a live config_item. configfs_rmdir() breaks that: simple_rmdir() leaves the dentry hashed, the last reference to the item is dropped right after, and the dentry is only unhashed by d_delete() once ->rmdir() has returned. configfs_symlink() resolves its target holding no lock on it, so get_target() can land in that window: BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90 get_target fs/configfs/symlink.c:128 [inline] configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185 Unhash in configfs_remove_dir(), while the item is still guaranteed to be there. A reference obtained just before that stays harmless, as create_link() rechecks CONFIGFS_USET_DROPPING, already set by configfs_detach_prep(). Both configfs_unregister_subsystem() paths d_drop() after detaching, so this only makes rmdir match them. | ||||