Export limit exceeded: 15481 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 28504 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28504 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-84484 | 1 Nasajpl | 1 Iondtn | 2026-09-04 | 7.5 High |
| ION-DTN versions before 4.2.0 contain an out-of-bounds read vulnerability in the decodeSdnv function that allows unauthenticated remote attackers to read memory by sending truncated SDNV values. Attackers can send a UDP datagram to the LTP link service input port with a truncated SDNV to trigger reads up to nine bytes past buffer boundaries and underflow byte counters. | ||||
| CVE-2026-84269 | 1 Redhat | 1 Enterprise Linux | 2026-09-04 | 6.5 Medium |
| A flaw was found in the AFP backend in gvfs. When mounting a share, a malicious AFP server can cause the DSI read path to process a length that exceeds the size requested by the client. The function does not verify the server-provided length against the pre-sized reply buffer, causing the operation to access past the intended boundaries. This issue allows a malicious server to overflow a heap buffer and crash the gvfsd-afp process, resulting in a denial of service. | ||||
| CVE-2026-85218 | 1 Bluez | 1 Bluez | 2026-09-04 | 7.1 High |
| A double stack-based buffer overflow was found in the BlueZ AVRCP controller implementation. A nearby BR/EDR peripheral can send a crafted AVRCP player-settings response that supplies an attacker-controlled attribute count, causing avrcp_list_player_attributes_rsp() and avrcp_get_current_player_value() in profiles/audio/avrcp.c to write attacker-controlled data past fixed-size stack buffers, potentially leading to a crash or code execution in the bluetoothd daemon. | ||||
| CVE-2026-85393 | 1 Digitalbazaar | 1 Forge | 2026-09-03 | 7.5 High |
| node-forge through 1.4.0 fails to validate element count in nested DigestAlgorithm sequences during RSA PKCS#1 v1.5 signature verification. Attackers can embed garbage bytes inside the DigestAlgorithm sequence to forge valid signatures for arbitrary messages using low-exponent RSA keys. This is an incomplete fix for CVE-2026-33894. | ||||
| CVE-2026-15431 | 2 Hp, Hp Inc. | 2 Support Assistant, Hp Support Assistant | 2026-09-03 | N/A |
| A potential security vulnerability has been identified in the HP Support Assistant for versions prior to 9.53.2.0. The vulnerability could potentially allow a local attacker to escalate privileges due to insufficient access controls. | ||||
| CVE-2026-84640 | 1 Mozilla | 1 Thunderbird | 2026-09-03 | 7.5 High |
| A maliciously constructed mail header could lead to a one byte read past the end of a buffer. This vulnerability was fixed in Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. | ||||
| CVE-2026-84351 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-09-03 | 8.3 High |
| Buffer overflow in GPU in Google Chrome on on Windows prior to 152.0.7977.75 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-51934 | 1 Tenda | 1 A18 | 2026-09-03 | 9.8 Critical |
| Buffer Overflow vulnerability in Shenzhen Jixiang Tengda Technology Co., Ltd. Tenda A18 v.15.13.07.09 allows a remote attacker to execute arbitrary code via the fromSetCmdlineRun function | ||||
| CVE-2026-12661 | 2 Rockwell Automation, Rockwellautomation | 2 Factorytalk Historian Machine Edition, Factorytalk Historian Machine Edition | 2026-09-03 | N/A |
| A denial-of-service security issue exists within FactoryTalk® Historian Machine Edition. A network adjacent attacker who is authenticated could send crafted requests to the web interface, resulting in buffer overflow conditions that may cause the device to crash and become unresponsive. | ||||
| CVE-2025-9189 | 3 Digilent, Measx, Ni | 3 Dasylab, Dasylab, Dasylab | 2026-09-03 | 7.8 High |
| There is an out of bounds write vulnerability due to improper bounds checking resulting in a large destination address when parsing a DSB file with Digilent DASYLab. This vulnerability may result in arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted DSB file. The vulnerability affects all versions of DASYLab. | ||||
| CVE-2026-64087 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) reject implausible blackbox record_count adm1266_nvmem_read_blackbox() loops over a record_count that comes straight from byte 3 of the BLACKBOX_INFO response. The destination buffer is data->dev_mem, sized for the nvmem cell's declared 2048 bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64). A device that reports a record_count greater than 32 -- whether due to firmware bugs, bus corruption, or a non-responsive slave returning 0xff -- would walk read_buff past the end of the dev_mem allocation on the trailing iterations. Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here) before entering the loop and return -EIO on any larger value, so a malformed BLACKBOX_INFO response cannot drive the loop out of bounds. | ||||
| CVE-2026-64347 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job. | ||||
| CVE-2026-64351 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration. | ||||
| CVE-2026-64339 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len) into the caller's buffer. bpkt_len is fully controlled by the device and is only checked against ibuf_len; ibuf_len in turn is checked against usbio->txbuf_len, not against rxbuf_len: if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || (ibuf_len > (usbio->txbuf_len - sizeof(*bpkt)))) return -EMSGSIZE; txbuf_len and rxbuf_len are taken independently from the bulk OUT and bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or malfunctioning device that advertises a large bulk OUT endpoint and a small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab object. The over-read bytes are handed back to the i2c layer and on to user space through i2c-dev, disclosing adjacent slab memory; with KASAN this is reported as a slab-out-of-bounds read. The number of bytes actually received is already known: act equals the URB actual_length and is bounded by rxbuf_len. Reject any response that claims more payload than was received, mirroring the existing "act < sizeof(*bpkt)" check just above. The control path (usbio_ctrl_msg()) is not affected: it uses a single buffer (ctrlbuf) for both directions, so its analogous copy can never leave the allocation. Found by code review. The out-of-bounds read was confirmed under AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is also available. | ||||
| CVE-2026-64318 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold. | ||||
| CVE-2026-64446 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. | ||||
| CVE-2026-64066 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_to_pagecache() to pause on subreq failure Fix netfs_read_to_pagecache() so that it pauses the generation of new subrequests if an already-issued subrequest fails. | ||||
| CVE-2026-53600 | 1 Dignifiedquire | 1 Async-tar | 2026-09-03 | 5.3 Medium |
| async-tar is a tar archive reading/writing library for async Rust. Prior to version 0.6.1, async-tar mis-applies a buffered PAX size extension to an intermediary extension header (a GNU longname L, a GNU longlink K, or a PAX x/g header) instead of to the next file entry. POSIX requires a PAX extended-header record set to describe the next file entry, never an intervening extension header. Because poll_next_raw (src/archive.rs) threads the buffered PAX records into the size computation of whatever raw header it reads next — and that header can be an intermediary L — the stream cursor is advanced by an attacker-chosen amount when the L body is consumed. The parser then desyncs relative to a POSIX-correct tar parser (e.g. GNU tar), reading subsequent bytes at the wrong block boundary. This issue has been patched in version 0.6.1. | ||||
| CVE-2026-85084 | 1 Samsung Open Source | 1 Tizenfx | 2026-09-03 | 6.3 Medium |
| Out-of-bounds Write and Improper Validation of Array Index vulnerability in Samsung Open Source TizenFX Samsung/TizenFX allows Overflow Buffers. | ||||
| CVE-2021-43614 | 1 Insyde Software | 1 Insydeh2o | 2026-09-03 | 6.7 Medium |
| Error in handling the PlatformLangCodes UEFI variable could cause a buffer overflow, leading to resource exhaustion and failure. | ||||