| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix stack OOB read in iptfs_skb_reset_frag_walk()
iptfs_skb_reset_frag_walk() advances to the fragment containing @offset
with an unbounded loop:
while (offset >= walk->past + walk->frags[walk->fragi].len)
walk->past += walk->frags[walk->fragi++].len;
walk->fragi is advanced and walk->frags[walk->fragi] is dereferenced
without ever checking fragi against walk->nr_frags. When the requested
offset is at or beyond the total length spanned by the walk's fragments,
fragi runs past nr_frags and off the end of the fixed-size on-stack
frags[MAX_SKB_FRAGS + 1] array, reading out-of-bounds stack memory.
The two callers behave differently: iptfs_skb_add_frags() already guards
against this with
if (!walk->nr_frags ||
offset >= walk->total + walk->initial_offset)
return len;
but iptfs_skb_can_add_frags() has no such guard and calls
iptfs_skb_reset_frag_walk() unconditionally, so it performs the
out-of-range walk. Its own "fragi < walk->nr_frags" bound check runs only
afterwards, too late to prevent the read.
This is reachable from the receive path: a crafted IP-TFS (AGGFRAG)
payload delivered to an IPTFS SA drives iptfs_reassem_cont() ->
iptfs_skb_can_add_frags() with an offset past the fragment total, e.g.:
BUG: KASAN: stack-out-of-bounds in iptfs_skb_reset_frag_walk+0x235/0x250
Read of size 4 at addr ffff888008ad7210 by task repro/345
iptfs_skb_reset_frag_walk+0x235/0x250 net/xfrm/xfrm_iptfs.c:392
iptfs_skb_can_add_frags+0x155/0x310 net/xfrm/xfrm_iptfs.c:420
iptfs_reassem_cont+0xcf8/0x1140 net/xfrm/xfrm_iptfs.c:902
iptfs_input_ordered+0x552/0x670 net/xfrm/xfrm_iptfs.c:1280
iptfs_input+0x3d6/0xde0 net/xfrm/xfrm_iptfs.c:1741
xfrm_input+0x282f/0x6140 net/xfrm/xfrm_input.c:700
xfrm4_esp_rcv+0x93/0x120 net/ipv4/xfrm4_protocol.c:104
ip_rcv+0x278/0x2d0 net/ipv4/ip_input.c:612
Give iptfs_skb_can_add_frags() the same up-front guard that
iptfs_skb_add_frags() already has, so the walk is never entered with an
out-of-range offset. When it triggers, the caller falls back to the
existing linearize-and-copy path, which is safe. |
| Buffer overflow in WebRTC in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| GNU Aspell contains an out-of-bounds read vulnerability in ReadOnlyDict::load() in readonly_ws.cpp. When loading a binary .rws dictionary file, it uses offset fields from the file header as byte indices into a heap buffer without validating their bounds. An attacker can trigger this by convincing a user to run aspell with a crafted dictionary file supplied through --master, --dict-dir, or configuration options, leading to heap memory disclosure or a denial of service via application crash.
This issue was fixed in commit 941953b25031bc9104e83f58e138a664b8dedc3f which will be released in version 0.60.8.3. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix server->total_read for compound encrypted PDUs
In receive_encrypted_standard(), server->total_read is left at the
full decrypted frame size when walking sub-PDUs of a compound encrypted
frame. As a result, cifs_handle_standard() passes this full size
to smb2_check_message(), causing the PDU length guards to incorrectly
validate the entire compound frame instead of the current sub-PDU.
This allows truncated non-last sub-PDUs to bypass length validation,
leading to out-of-bounds reads in smb2_get_data_area_len().
Fix this by setting server->total_read to the true length of the
current sub-PDU: next_cmd for non-last sub-PDUs, and the remaining
pdu_length for the last one. |
| NVIDIA TensorRT contains a vulnerability where an attacker can cause an out of bounds read. A successful exploit of this vulnerability may lead to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access
btmtksdio.c and btmtkuart.c cast a received WMT event straight to
struct btmtk_hci_wmt_evt and read its op/flag fields without checking
the event is long enough to contain them, unlike btmtk.c. The
FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc
and reads its 2-byte status field, again without a length check.
Firmware that sends a short or malformed WMT event makes both drivers
read past the end of the received SKB.
Mirror btmtk.c: validate the base WMT header with skb_pull_data()
before touching any of its fields, and when a FUNC_CTRL event turns
out to be the short, header-only form (a plain enable/disable ack
with no status word), decode the result from the header's own flag
byte instead (0 = success, otherwise failure).
Verified setup on MT7920, MT7921, MT7922 and MT7925: no regression. |
| In the Linux kernel, the following vulnerability has been resolved:
neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS.
NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses
.validation_type, so no validation is applied:
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is
silently cast to u32, so a larger value can bypass the min check:
e.g. 4294967296 == 0x100000000
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 4294967296}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
msecs_to_jiffies() returns MAX_JIFFY_OFFSET if the value is
larger than INT_MAX. Also, INT_MAX ms overflows int NEIGH_VAR()
when HZ > 1000 (Alpha, MIPS), and passing a negative integer to
queue_delayed_work(unsigned long delay) causes sign extension,
which wraps around the expiry time to the past, resulting in it
being handled as 0 delay in the timer wheel.
Let's use NLA_POLICY_FULL_RANGE() and limit the max to 1 day.
The same max check is applied to sysctl as well.
Note that this controls the probe interval for NTF_MANAGED
entries, so the max of 1 day is unlikely to break any
deployments. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate the netif index in t7xx_ccmni_recv_skb()
The netif index carried in the DPMAIF PIT header is five bits wide,
but ccmni_inst[] only has room for NIC_DEV_MAX (21) entries.
t7xx_ccmni_recv_skb() indexes the array without a bounds check, so
indexes 21 to 31 read past it. The out-of-bounds value lands in the
callback table that follows the array, which is never NULL, so the
existing !ccmni check does not catch it and the driver dereferences
whatever sits there as a struct t7xx_ccmni.
Drop the skb when the index is out of range.
Verified in a QEMU guest with a fault injector setting the netif
index to 25: the unpatched driver reads a value past ccmni_inst[],
which lands in the callback table, and dereferences it far enough to
queue the skb. With this check the packet is dropped. Well-formed
traffic on index 0 is unaffected.
Changes in v2: none. |
| A flaw was found in SSSD. A local attacker with access to the Name Service Switch (NSS) responder UNIX socket can trigger an integer underflow by sending a specially crafted request with an undersized packet header. This issue causes an out-of-bounds memory read during packet parsing, crashing the responder process and resulting in a Denial of Service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS
scpi_dvfs_get_info() already rejected a zero opp_count, but still trusted
any larger value from the SCP firmware. The shared-memory reply only holds
MAX_DVFS_OPPS entries in buf.opps[]; a bigger count over-reads that array
and then sizes the allocated OPP table incorrectly (garbage OPPs / OOB).
The missing upper bound dates back to the original SCPI DVFS support.
Reject zero and out-of-range counts in one check and return -EINVAL. |
| The H5Z__nbit_decompress_one_byte, H5Z__nbit_decompress_one_nooptype, and H5Z__nbit_decompress_one_atomic functions in H5Znbit.c in HDF5
prior to 2.3.0 advance a read index into the compressed chunk buffer without bounding it against the buffer's actual size. This allows attackers to cause an out-of-bounds heap read, and in constrained cases disclosure of adjacent heap memory into decompressed dataset values, via a crafted HDF5 file whose N-Bit filter parameters describe more decompressed data than the stored compressed chunk actually contains, triggered via H5Dread, e.g. by the h5ls or h5repack tools. |
| H5Z__filter_fletcher32 in H5Zfletcher32.c in HDF5 prior to 2.3.0 computes the data length to checksum by subtracting the 4-byte trailing checksum size from the input buffer size without checking that the buffer is at least 4 bytes, allowing a size_t underflow. This allows attackers to cause a denial of service (massively out-of-bounds read and application crash in H5_checksum_fletcher32) via a crafted HDF5 file with a Fletcher32-filtered chunk smaller than 4 bytes, triggered via H5Dread, e.g. by the h5ls or h5dump tools. |
| H5Z__filter_nbit in H5Znbit.c in HDF5 prior to 2.3.0 dereferences cd_values[0] through cd_values[4] without validating that cd_values is non-NULL or that cd_nelmts is at least 5, the fixed size of the filter's header. This allows attackers to cause a denial of service via a crafted HDF5 file that stores the N-Bit filter pipeline message with zero client-data values, opened and read via H5Dread, e.g. by the h5ls or h5repack tools. |
| An integer underflow vulnerability in the WatchGuard Fireware OS IKE daemon (iked) allows a remote attacker who has completed the initial IKEv2 handshake to crash the iked process by sending a specially crafted encrypted IKEv2 message, resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg()
In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist
putting each entry into 'sg', but the entry length is read from 'sgl'
(the list head) instead of 'sg' (the current entry):
for_each_sg(sgl, sg, sg_len, i) {
addr = sg_dma_address(sg);
avail = sg_dma_len(sgl); /* should be 'sg' */
Consequently 'avail' is always the length of the first entry. For
multi-sg lists this causes out-of-bounds reads when a later entry is
shorter than the first, and silent data loss when it is longer.
Single-sg or uniformly-sized lists happen to mask the issue. |
| Vim is an open source, command line text editor. Prior to 9.2.0846, set_sofo() in src/spellfile.c reuses sl_sal_first[] without resetting values left by set_sal_first(), so a crafted spell file containing an SN_SAL section before an SN_SOFO section causes under-counted mapping lists and attacker-influenced writes beyond a heap allocation. This issue is fixed in version 9.2.0846. |
| Vim is an open source, command line text editor. From 9.2.0469 until 9.2.0843, popup_mark_opacity_zindex() in src/popupwin.c can use a negative w_winrow for a text-property-anchored popup with clipwindow and opacity, indexing before the screen array instead of accounting for w_popup_topoff and causing an out-of-bounds read and conditional write. This issue is fixed in version 9.2.0843. |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT signature segment is affected because signature segment decoding accepts characters outside the canonical Base64URL representation. This occurs when non-Base64URL characters are appended to a valid compact JWS signature segment. As a result, base64url_decode produces the same signature bytes for different serialized segments. Consequently, raw-token revocation checks can fail to recognize an equivalent modified token. This issue is fixed in version 2.14.0. |
| tftp-hpa 5.4 before 6.0 contains an out-of-bounds read vulnerability in rewrite_string() in tftpd/remap.c that walks heap memory during jump label searches. Unauthenticated remote attackers can send read or write requests whose filename matches a remap jump rule to crash the forked in.tftpd request handler. |
| Wasmtime is a runtime for WebAssembly. From 46.0.0 until 46.0.2 and 47.0.3, fuel and epoch preemption checks inside bulk operations including memory.copy, table.grow, and array.copy can expose invalid intermediate state when an embedder mutates a Store in Store::epoch_deadline_callback or continues using a Store after cancellation or a trap. A cancelled non-nullable table growth can leave null elements, linear-memory growth during memory.copy can invalidate retained raw pointers, and callback-triggered garbage collection during array.copy can invalidate GC pointers, resulting in a crash, invalid memory access, or GC heap corruption. Embeddings whose callbacks only access the host data in Store<T>, and embeddings that discard a Store after timeout or epoch deadline, are not affected. This issue is fixed in versions 46.0.2 and 47.0.3. |
