| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Integer overflow in Editing in Google Chrome prior to 156.0.8078.79 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix potential 32-bit overflow when accessing ARRAY map element
If BPF array map is bigger than 4GB, element pointer calculation can
overflow because both index and elem_size are u32. Fix this everywhere
by forcing 64-bit multiplication. Extract this formula into separate
small helper and use it consistently in various places.
Speculative-preventing formula utilizing index_mask trick is left as is,
but explicit u64 casts are added in both places. |
| An issue has been discovered in ClickHouse Server that, under certain conditions, could allow an unauthenticated user with network access to execute arbitrary code on the ClickHouse Server. |
| In the Linux kernel, the following vulnerability has been resolved:
calipso: keep BIG TCP payload_len in calipso_skbuff_setattr()
calipso_skbuff_setattr() adjusts payload_len by the length of the
option it inserts or resizes:
payload = ntohs(ip6_hdr->payload_len);
ip6_hdr->payload_len = htons(payload + len_delta);
GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores
payload_len == 0 for them; ipv6_payload_len() then falls back to
skb->len. For such a packet forwarded to a destination mapped to
CALIPSO, the code above writes len_delta (or 65536 + len_delta when
shrinking) into payload_len, and ipv6_payload_len() no longer falls
back to skb->len. nf_tables, conntrack and sch_cake rely on it.
The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN,
and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its
real length back.
Set payload_len from the skb length with ipv6_set_payload_len(), which
stores 0 above IPV6_MAXPLEN and the real length otherwise, as
ipv6_gro_complete() does. The network header was just reset to
skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length.
Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal
mdp-generated policy (network_peer_controls=1), "netlabelctl calipso
add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO
DOI 16. calipso_skbuff_setattr() was called through
netlbl_skbuff_setattr() from a test-only debugfs hook (not part of
this patch) adding a level-only label; payload_len after the call:
case before fix after fix real length
1000, unlabeled 1016 1016 1016
70000 GSO, payload_len 0 16 0 70016
65530 GSO, grows past MAXPLEN 10 0 65546
65540 GSO with a 24 byte hop
header, shrinks below MAXPLEN 65528 65532 65532
1000 with a 24 byte hop header 992 992 992
(0 means ipv6_payload_len() returns the real length.) On the forward
path, with a client injecting unlabeled UDP through a router to a
server, the router adds the CALIPSO option and the server delivers all
datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Harden DMC firmware payload parsing
Validate the conversion of the DMC firmware size from dwords to bytes
using check_mul_overflow() before calculating the firmware payload size.
Reject zero-length payloads and zero MMIO counts in the DMC firmware
header so malformed firmware is caught early. Also set dmc_fw_size only
after the payload allocation succeeds.
(cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef) |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: prevent TX_RING byte count overflow
tpacket_snd() drains every SEND_REQUEST frame in a TX ring and adds
each valid packet length to the signed int len_sum. Userspace can
recycle completed frames concurrently, so a single blocking send call
is not bounded by the ring size.
After enough successful transmissions len_sum wraps into the negative
range. In particular, 65536 65535-byte frames followed by a 65007-byte
frame produce 0xfffffdef, or -EIOCBQUEUED. sock_sendmsg_nosec() treats
that as an impossible return and triggers a BUG. On systems configured
to panic on oops, a CAP_NET_RAW holder can panic the host kernel.
Stop before the next frame would make the byte count exceed INT_MAX.
The positive short count leaves that frame pending for a later send
call.
A two-thread TPACKET_V2 reproducer triggered the BUG on an arm64 build
of Linux 7.3-rc4. With this change, the same reproducer returned the
expected positive short count without an oops. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fail DACL rewrite when the new DACL exceeds 64K
replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of
the DACL they build in a u16. That accumulator can wrap.
validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) /
20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can
grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with
one carrying SID_MAX_SUB_AUTHORITIES sub-authorities. The worst case is
therefore sizeof(struct smb_acl) + 3276 * 76 = 248984 bytes, far beyond
what a u16 can hold. A wraparound is reached with 863 ACEs.
After the wraparound, ndacl_ptr->size becomes meaningless and the offset
will point anywhere in the ACE array. As a result, we will see
corruption of the DACL, which then gets sent to the server. This is not
an out-of-bounds write as the allocation now covers the worst-case
expansion, so writes will always go into the buffer.
Adjust the code to use a u32 internally and return -EOVERFLOW in the
overflow case. The operation must be refused, because a DACL can only
hold 2^16-1 bytes on the wire and larger DACLs cannot be represented.
set_chmod_dacl() carries the same pattern and is fixed the same way. It
only wraps once the source DACL comes within roughly 380 bytes of the
64K ceiling, but the failure mode is identical. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: simpledrm: Improve stride validation
Validate the computed stride against the maximum value INT_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In that function, we round down the start position and round up the
ending position.
But during the calculation of @len, we use "round_up(start + len,
sectorsize)", which is the rounded up end position, not the rounded up
length.
Which results a much larger length, and later we are still using
"start + len", which is completely incorrect.
Fix it by declaring a local @aligned_start and @aligned_len and use them
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue
gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the
current backlog plus the packet length fits within the queue limit:
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ)
gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ)
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo)
sch->qstats.backlog + skb->len <= q->limit (plug)
sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len
are unsigned int, so all sums are computed in 32 bits and wrap at 2^32.
Once the true backlog exceeds 4 GiB the wrapped sum becomes small and
admission keeps succeeding, so the queue grows without bound and the kernel
can be driven to OOM.
Promote the sums to u64 so admission stops once the true backlog exceeds
the limit. The limit is u32, so the bounded queue stays below 2^32 and
the stored u32 backlog never wraps.
The bug can only be reproduced as root (albeit with ridiculous setup):
attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB,
leaving the default VQ unconfigured (for gred), and drive >4 GiB of
queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len,
or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32,
admission keeps succeeding, and the queue grows unboundedly to OOM. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq: add overflow bounds to quantum and initial quantum
fq_init() computes quantum = 2 * psched_mtu() and initial_quantum = 10 *
psched_mtu() with no overflow check. A device with a huge MTU (e.g. dummy
with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return
0x80000000; the 2 * and 10 * multiplications wrap to 0 in 32-bit
arithmetic, so q->quantum == 0. Then in fq_dequeue() the credit-refill
loop adds 0 to f->credit (which stays <= 0) and goto begin loops
forever under the qdisc lock, creating a soft lockup.
Clamp psched_mtu() to [1, 1 << 20] before multiplying so the product
cannot wrap, then cap the result at 1 << 20, matching the bound already
enforced on TCA_FQ_QUANTUM in fq_change().
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) is large enough that 2 * psched_mtu() wraps (e.g. a
dummy device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix length check __import_wp_info()
struct kvm_hw_breakpoint::len is a __u64 that is fully controlled by user
space. This is then assigned to wp_info->len, which is an int. The bounds
check is done on the truncated value while the allocation uses the
untruncated one:
wp_info->len = bp_data->len;
[...]
if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE)
return -EINVAL;
wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL_ACCOUNT);
Use the validated value for the allocation as intended. Without this
fix userspace can trigger >4GB allocations which will fail and result
in a WARN due to MAX_PAGE_ORDER. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate MOVE_RANGE destination size
F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end
before updating i_size. A source hole can expose this: __clone_blkaddrs()
skips NULL_ADDR entries and returns success, so the caller can still extend
the destination inode with unchecked pos_out + len.
Reject destination overflow and use inode_newsize_ok() before extending
the destination inode. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops
A client can send an NFSv3 SETATTR, CREATE, MKDIR, SYMLINK or MKNOD
carrying an atime or mtime whose nseconds field is out of range. The
value is well-formed on the wire and decodes cleanly into a valid
uint32, but it is not a valid timespec64: tv_nsec must be less than
NSEC_PER_SEC.
Nothing in the setattr path clamps it. notify_change() runs the time
through timestamp_truncate(), which does not reduce tv_nsec below
NSEC_PER_SEC when the filesystem supports nanosecond granularity
(s_time_gran == 1), and the inode atime/mtime setters store it verbatim
(only ctime is normalized, via inode_set_ctime_to_ts()). The
un-normalized value then corrupts on-disk metadata: ext4's
ext4_encode_extra_time() shifts tv_nsec left by EXT4_EPOCH_BITS, which
overflows the 32-bit extra field and clobbers the seconds-epoch bits, so
the stored seconds (and thus the year) are wrong on read-back. XFS with
bigtime mis-stores the timestamp for the same reason.
Validate the client-supplied atime/mtime in the proc handlers and return
NFS3ERR_INVAL before anything is changed. RFC 1813 lists NFS3ERR_INVAL
for SETATTR and describes it as the error for a value the server 'can
not store ... in its own representation'; the client maps it to EINVAL.
Checking in the proc handlers, rather than in nfsd_setattr(), keeps the
rejection in front of object creation. The create operations create the
object before nfsd_create_setattr() runs, so a late failure would leave
the new object behind and turn a non-idempotent request into a namespace
change that reports failure. The check is therefore done up front, for
the create operations before the object is created.
tv_nsec is a long, so the comparison casts it to unsigned long (the same
width) rather than to u32, matching timespec64_valid(). A u32 cast would
truncate on 64-bit; the unsigned long cast also rejects a value that
became negative when an out-of-range u32 wire nseconds was assigned to a
32-bit long.
Only client-supplied times are checked: SET_TO_SERVER_TIME requests
carry no client value. The sattrguard3 ctime is deliberately left alone:
an out-of-range guard simply never matches the object's ctime and yields
NFS3ERR_NOT_SYNC via the existing guardtime comparison, which is the
protocol-correct outcome rather than rejecting the request. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_table_check: skip special zero mappings
page_table_check_set() and page_table_check_clear() account mappings based
on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special
mappings, but page_table_check can still account them as file-backed
pages.
An unprivileged process can populate enough zero mappings to overflow
file_map_count and hit the existing BUG_ON(). The PTE path can do this
with the shared zero page, and the PMD path can do the same with huge zero
mappings.
Skip special zero mappings in the user page-table accounting paths. Keep
the PTE-side pte_special() check, and identify huge zero PMDs from the
mapped folio instead of pmd_special(). That covers architectures where
pmd_special() is a no-op without adding huge_zero_pfn checks to the
generic counter helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix integer overflow in radeon_align_pitch()
radeon_align_pitch() has the same kind of overflow issue as the old
amdgpu helper: both the alignment round-up add and the final
'aligned * cpp' calculation can overflow signed int.
If that wraps, radeon_mode_dumb_create() can end up returning an
invalid pitch or creating a zero-sized dumb buffer.
Fix this by using check_add_overflow() for the alignment round-up and
check_mul_overflow() for the final pitch calculation, returning 0 on
overflow. Also reject zero pitch and size in
radeon_mode_dumb_create().
Found via AST-based call-graph analysis using sqry. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: detect mapping-pairs LCN accumulator overflow
The NTFS mapping-pairs parser accumulates relative LCN deltas in a
signed integer. A corrupted attribute can drive that addition past
the representable range.
One corrupt runlist shape sets the accumulated LCN to S64_MAX and
then adds a delta of 1 in the next mapping-pairs entry.
Signed overflow is undefined and can turn an invalid runlist into a
different set of physical clusters.
Check the LCN addition for overflow before storing the next run. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Ignore Port I/O requests of length '0'
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: unify lcn as u64 for 32-bit platforms
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: check for overflows in io_pin_pages
WARNING: CPU: 0 PID: 5834 at io_uring/memmap.c:144 io_pin_pages+0x149/0x180 io_uring/memmap.c:144
CPU: 0 UID: 0 PID: 5834 Comm: syz-executor825 Not tainted 6.12.0-next-20241118-syzkaller #0
Call Trace:
<TASK>
__io_uaddr_map+0xfb/0x2d0 io_uring/memmap.c:183
io_rings_map io_uring/io_uring.c:2611 [inline]
io_allocate_scq_urings+0x1c0/0x650 io_uring/io_uring.c:3470
io_uring_create+0x5b5/0xc00 io_uring/io_uring.c:3692
io_uring_setup io_uring/io_uring.c:3781 [inline]
...
</TASK>
io_pin_pages()'s uaddr parameter came directly from the user and can be
garbage. Don't just add size to it as it can overflow. |
