| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory
uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in
probe(), but then calls kfree(udev) both on the probe() error path
(label out_free) and again in remove().
Because devm_kzalloc() allocations are devres-managed and are freed
automatically when the device is detached (including after a failing
probe() and during driver unbind), the explicit kfree() can lead to a
double free.
If probe() fails after devm_kzalloc(), the error path frees udev and
devres cleanup will free it again when the core unwinds the partially
bound device. On normal driver removal, remove() frees udev and devres
will free it again when the device is detached.
This issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix by removing the manual kfree() calls
and dropping the now-unused label. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: reset runtime state when cloning SAs
iptfs_clone_state() clones the IPTFS mode data with kmemdup(). This
copies runtime objects which must not be shared with the original SA,
including the embedded sk_buff_head, hrtimers, spinlock, and in-flight
reassembly/reorder state.
If xfrm_state_migrate() fails after clone_state() but before the later
init_state() call has reinitialized those fields, the cloned state can be
destroyed by xfrm_state_gc_task() with list and timer state copied from the
original SA. With queued packets this lets the clone splice and free skbs
owned by the original IPTFS queue, leading to use-after-free and
double-free reports in iptfs_destroy_state() and skb release paths.
Reinitialize the clone's runtime state before publishing it through
x->mode_data. Because clone_state() now publishes a destroyable mode_data
object before init_state(), take the mode callback module reference there.
Avoid taking it again from __iptfs_init_state() for the same object. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix race in discovery auth updates
Separate configfs opens can concurrently update the discovery AuthMethod
parameter. Both callers may free the same value in
iscsi_update_param_value(), causing a double-free.
Protect the lookup and replacement with the discovery TPG access lock,
as used by the other TPG configfs parameter updates. |
| In the Linux kernel, the following vulnerability has been resolved:
of/overlay: put property on deadprops only after changeset add succeeds
add_changeset_property() links a new property of a not-yet-live
target node into the node's deadprops list before handing it to
of_changeset_add_property(). If that fails, the error path frees the
property but leaves the freed pointer linked in deadprops, and
of_node_release() frees it a second time when the aborted overlay's
node is released.
Record the changeset entry first and link the property into deadprops
only on success. of_changeset_add_property() never looks at the
node's property lists, so the order of the two steps is otherwise
immaterial, and the error path frees a property that nothing
references. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: preserve hidden-group beacon IE ownership
A hidden-group probe-response entry borrows its beacon IEs from the
group's beacon entry. cfg80211_update_assoc_bss_entry() can pass such
an entry to cfg80211_update_known_bss() when merging scan entries
after a channel switch.
Copying the borrowed beacon_ies into the associated entry gives the
same allocation two owners. Releasing the group's beacon entry can
then leave the associated entry pointing to freed IEs, which are
freed again when that entry is released.
Skip beacon IE replacement when the source entry belongs to a hidden
group. Preserve probe-response processing, the subsequent metadata
updates, and the existing rejection path for conflicting hidden
beacon updates. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: hwsim: serialize pib updates to fix double-free
hwsim_update_pib() does an unserialized read-swap-free of phy->pib:
pib_old = rtnl_dereference(phy->pib);
...
rcu_assign_pointer(phy->pib, pib);
kfree_rcu(pib_old, rcu);
It assumes the RTNL is held, but ->set_channel is not always called
under it: the mac802154 scan worker changes channels via
drv_set_channel() without the RTNL. Such an update can race an
RTNL-held one on the same phy; both read the same pib_old and both
kfree_rcu() it, double-freeing the object. With SLUB percpu sheaves
batching kfree_rcu(), this surfaces as a KASAN invalid-free in
rcu_free_sheaf().
struct hwsim_phy has no lock for pib. Add one and make the swap atomic
with rcu_replace_pointer() under it, dropping the misleading
rtnl_dereference(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to
probe_hw_failed and calls qla2x00_mem_free(). Several error labels in
qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool,
flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info)
but left the pointers dangling. qla2x00_mem_free() then freed them a
second time. Worse, for the dma_pool members it issued
dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been
destroyed and set to NULL at fail_s_dma_pool, dereferencing a NULL pool.
Clear each freed pointer (and its DMA handle) in the error labels so the
subsequent qla2x00_mem_free() skips them. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix recursive locking during device registration
i3c_master_register_new_i3c_devs() registers newly discovered devices
while holding i3c_bus_normaluse_lock(), a down_read(). device_register()
can immediately probe the device, and probe callbacks typically invoke
I3C helpers that take i3c_bus_normaluse_lock() again, leading to a
recursive acquisition of the same rwsem. rwsems do not support recursive
read locking and can deadlock when a writer is waiting. See the
"Recursive read locks" section of Documentation/locking/lockdep-design.rst.
For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like:
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind
WARNING: possible recursive locking detected
kworker/5:1/94 is trying to acquire lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370
but task is already holding lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0
Fix this by separating device creation from device registration.
Populate desc->dev under the maintenance lock, collect the devices that
still need registration into a local list, then release the lock before
calling device_register(). Finally retake the lock and clean up any
devices that failed to register.
Use the maintenance lock rather than the normal-use lock while adding
device objects. A write-side maintenance lock prevents readers from
observing a partially initialized desc->dev during initial device
population, or desc->dev disappearing if registration fails.
The local list requires a list node, so add a list node member to struct
i3c_device. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Mark the connection down when bringing it up fails
Every failure path in tbnet_connected_work() undoes its own work and
returns without clearing login_sent, so the connection still looks
established. The next tbnet_tear_down() therefore takes its main branch
and repeats a teardown that already happened: it stops rings that are
already stopped, which is a dev_WARN() and fatal under panic_on_warn,
and it releases net->remote_transmit_path even on the HopID mismatch
path, where this connection never owned that id, silently freeing one
that someone else is still using.
Clear login_sent on those paths. That is enough for tbnet_tear_down() to
leave the unwound state alone, and login_received has to stay set: it
records that the peer has logged in and carries the transmit path it gave
us, which nothing on this side can make the peer send again. Two things
change beyond keeping the teardown out of the way: the logout request in
that block is no longer sent, and the peer's next login request now
re-queues our login work rather than connected_work, giving the
connection a fresh login instead of a retry on stale state. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix double free of wq, engine, and group structs
The release callbacks for wq, engine, and group devices
(idxd_conf_wq_release, idxd_conf_engine_release,
idxd_conf_group_release) each call kfree() on the enclosing struct.
The setup error paths and cleanup functions also call kfree()
explicitly after put_device(), producing a double free whenever
put_device() drops the reference count to zero and fires the release.
In the setup functions, device_initialize() is called before
device_add(), so the reference count is exactly 1 at the error sites.
put_device() unconditionally fires the release, which frees the struct;
the subsequent explicit kfree() then operates on freed memory.
For idxd_setup_wqs(), the wq release callback also owns opcap_bmap
and wqcfg. The error unwind additionally freed those fields explicitly
before calling put_device(), causing further double frees on both.
Remove the redundant explicit kfree() calls from all setup error paths
and cleanup functions for wq, engine, and group structs, delegating
sole ownership of those allocations to the release callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: fix double free and WARN_ON in add_mtd_device() error paths
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix double-free of tx_buf skb
If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.
The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.
The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.
I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.
I looked for similar bugs in related Intel drivers and did not find any. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Completely fix fcport double free
In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free().
When an error happens, this function is called by qla2x00_sp_release(),
when kref_put() releases the first and the last reference.
qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport().
Doing it one more time after kref_put() is a bad idea. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Handle multiple PMU stop callback invocations
Handle the following scenario:
The kernel protects itself against a very high sampling load and
throttles the sampling using:
perf_event_throttle() --> PMU->stop()
Shortly later the scheduler may terminate the task and removes it from the
CPU. It again calls
PMU->stop()
which results in two invocations of PMU->stop() called back to back.
Protect against this and check the PERF_HES_STOPPED bit on function
entry. If it is already set return.
Clear bit PERF_HES_STOPPED in PMU->start().
Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event.
It sets perf_event::event_limit to a positive value and causes
perf_event_overflow() to invoke pai_stop() call back function when
perf_event::event_limit hits zero. This is not supported because the
sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out
of a task.
Use list_for_each_entry_safe() for safe iteration over syswide_list
in pai_have_samples(). |
| SurrealDB before 1.1.1 contains a format string vulnerability in the rquickjs Exception::throw_type function when scripting is enabled. Attackers with scripting privileges can supply format string sequences in error inputs to read arbitrary memory or execute code with SurrealDB process privileges. |
| Use of externally-controlled format string in Windows Image Acquisition allows an authorized attacker to elevate privileges locally. |
| Use of externally-controlled format string in Windows NTFS allows an authorized attacker to elevate privileges locally. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow can double free image memory when ImagingScaleAffine encounters a selective allocation failure. The affected fast path handles Transform.EXTENT or pure scale-and-translate Transform.AFFINE operations with the default NEAREST resampling. The output image allocation must succeed while the additional per-column lookup allocation fails, after which the error path deletes image storage that later cleanup releases again. An attacker who can drive such a large Image.transform() operation under memory pressure may trigger the failure. This can crash the process and may corrupt memory. This issue is fixed in version 13.0.0. |
| FreeRDP before 3.32.0 contains a double-free vulnerability in nsc_context_initialize_encode() that leaves dangling plane pointers after a partial buffer growth failure. Attackers using a crafted RDP client can negotiate NSCodec with a large desktop geometry to trigger allocation failure, crashing the server during context teardown. |
| A double free in XKB SetGeometryin X.Org X Server before 21.1.25 and X Wayland before 24.1.14 could be used by attached clients to cause a crash or potentially code in the x server context. |
