| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Memory corruption in MediaStream in Google Chrome prior to 156.0.8078.79 allowed a remote attacker to potentially read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Keep the predicate limit separate from program capacity
predicate_parse() adds two to nr_preds to reserve the terminal TRUE
and FALSE entries. It also uses that increased value as the limit for
parsed predicates. If the initial count is smaller than the number
actually parsed, the program can fill the allocation and subsequent
accesses can go past its end.
Keep nr_preds as the predicate limit and use a separate value for the
allocation size. This leaves space for both terminal entries and a
zeroed entry when parsing stops at the limit. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: reject duplicate wiphy cipher suite entries
Duplicate entries in wiphy->cipher_suites do not describe any
additional capability, but cfg80211 currently accepts them and leaves
individual consumers to deal with them.
One such consumer is the WEXT compatibility code, which appends a WEP
key length for each WEP cipher entry it sees. Repeated WEP entries can
therefore overflow the fixed iw_range::encoding_size array returned by
SIOCGIWRANGE.
Reject duplicate cipher suite entries in wiphy_register() instead.
This keeps the cipher suite invariant in one place and makes malformed
wiphy descriptions fail early with -EINVAL, rather than relying on a
single cfg80211 user to handle duplicates correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix buffer overflow during vBIOS update
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix a possible underflow
We shouldn't trust the firmware about the length of the wowlan packet. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uac: validate rate list length before storing
UAC1 and UAC2 configfs rate-list attributes parse a comma-separated
list of sampling rates and store each parsed value in fixed-size arrays.
The arrays have UAC_MAX_RATES entries, but the store paths do not check
that the input contains at most that many tokens before writing through
opts->name##s[i++].
Writing more than ten rates therefore writes past the end of the
p_srates[] or c_srates[] array in struct f_uac1_opts or struct
f_uac2_opts.
With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the
UAC1 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac1.c:1669:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac1_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
The same reproducer against the UAC2 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac2.c:2087:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac2_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
Reject additional tokens once UAC_MAX_RATES entries have been parsed.
Also keep the original kstrdup() pointer for kfree(), because strsep()
advances the parsing cursor. Freeing the advanced cursor leaks the
original buffer on successful parses and can free an interior pointer on
some error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARNING in bpf_tracing_link_release
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/cluster: keep heartbeat local node stable
o2nm_node_local_store() handles local=0 by stopping o2net and setting
cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set.
That stale state makes o2nm_this_node() return 255, blocks a later local=1
attempt with -EBUSY, and can feed 255 to heartbeat users that call
o2nm_this_node() dynamically.
Clearing cl_has_local is required when the local node is reset. But
heartbeat threads can still be running at that point. They pin the local
node config item at startup, yet o2hb_do_disk_heartbeat() and thread
teardown re-read o2nm_this_node() for the local slot and for
o2nm_undepend_this_node(). Once local=0 has cleared the live local-node
state, those dynamic reads return O2NM_MAX_NODES, which is also the
invalid node number 255.
Store the local node number in the heartbeat region when the region
starts. Use that stable node for heartbeat slot writes/checks,
negotiation messages, and the final configfs undepend. Stop the heartbeat
loop when the current local node no longer matches the stored node, and
clear cl_has_local together with cl_local_node in the local=0 path so
nodemanager state matches node removal.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in o2hb_do_disk_heartbeat+0x372/0xb30
RIP: 0010:memset+0xf/0x20
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xd0/0x630
o2hb_do_disk_heartbeat+0x372/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x188/0x2f0
kasan_report+0xe4/0x120
o2hb_do_disk_heartbeat+0x5/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
o2hb_thread+0x14e/0x770
kthread_affine_node+0x139/0x180
lockdep_hardirqs_on_prepare+0xda/0x190
trace_hardirqs_on+0x18/0x130
kthread+0x19d/0x1e0
ret_from_fork+0x37a/0x4d0
__switch_to+0x2d5/0x6f0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: Only operate on Ethernet frames
act_ife encapsulates/decapsulates the original Ethernet header and uses
skb->dev->hard_header_len as the length of that header. That is only
correct for Ethernet devices: on a device where hard_header_len does not
match the L2 header that was actually pulled (PPP reports PPP_HDRLEN
while nothing is stripped on ingress), the ingress skb_push()/skb_pull()
use the wrong length and can hit skb_under_panic when headroom is tight.
IFE is Ethernet-only by design - it builds an outer ethhdr, rewrites
h_source/h_dest/h_proto, and calls eth_type_trans() on decode - so
instead of trying to make the offsets work for arbitrary link types,
simply drop packets that do not carry an Ethernet header.
Checking skb->dev->type alone is not enough. We have to cater for a
corner case where mirred can redirect an skb from a non-Ethernet device
to an Ethernet one, and skb->dev then says nothing about the framing the
skb actually has: an skb redirected from ppp0 reaches the target's ingress
hook with mac_len 0 and no Ethernet header at all. So at ingress also
require mac_len to be ETH_HLEN. On egress mac_len is not maintained, so
the device type is all we have; a bogus redirect there yields a malformed
frame rather than an out-of-bounds push, and it would be malformed with or
without IFE.
That corner case is not theoretical - redirecting from ppp0 into a veth
that has an ife encode action on its ingress hook panics without this
patch:
skbuff: skb_under_panic: len:98 put:14 head:ffff88800e410000
data:ffff88800e40fff5 tail:0x57 end:0x640 dev:veth3
kernel BUG at net/core/skbuff.c:214!
Call Trace:
skb_push (net/core/skbuff.c:224 net/core/skbuff.c:2657)
tcf_ife_act (net/sched/act_ife.c:829 net/sched/act_ife.c:874)
tc_run (net/core/dev.c:4463)
netif_receive_skb (net/core/dev.c:6463 net/core/dev.c:6522)
tcf_mirred_to_dev (net/sched/act_mirred.c:248 net/sched/act_mirred.c:328)
tcf_mirred_act (net/sched/act_mirred.c:489)
tc_run (net/core/dev.c:4463)
process_backlog (net/core/dev.c:6728)
With Ethernet framing guaranteed, use ETH_HLEN instead of
hard_header_len. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to migrate all curseg types during free_segment_range
In free_segment_range(), the curseg evacuation loop only iterates up to
NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg
types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC.
Even though these in-memory curseg types are not saved in the on-disk
checkpoint header, they still occupy active physical segments at runtime.
If an active in-memory curseg happens to be allocated within the segment
range being truncated during filesystem shrink, failing to evacuate it
will cause subsequent writes to the curseg attempting out-of-bounds I/O
on the truncated storage range.
Fix this by expanding the curseg evacuation loop upper bound to
NR_CURSEG_TYPE to ensure all active curseg types are safely migrated
out of the target range. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix UVD dpb min size calculation for H264
This should use actual number of references from the decode
message, instead of maximum derived from level.
(cherry picked from commit 64b525edb7e7bdfcdc77883c5e413804e2396856) |
| In the Linux kernel, the following vulnerability has been resolved:
tls: device: fix out-of-bounds write in tls_append_frag()
Found with syzkaller and a local syzbot instance running on top of a
netdevsim TLS offload emulation; tls_device.c is otherwise only reachable
on a machine with a NIC that implements the offload.
tls_push_data() only checks whether the open record still has room for
another frag at the bottom of its loop, and the MSG_MORE early break
skips that check. The record survives to the next syscall with the frag
count it already had, and tls_append_frag() does not check either, so
with TLS_TX_ZEROCOPY_RO every splice(SPLICE_F_MORE) of a byte or two adds
a non-coalescing pipe page and num_frags walks off the end of
tls_record_info.frags[MAX_SKB_FRAGS]. Once the record is pushed,
tls_push_record() runs the same index over sg_tx_data[MAX_SKB_FRAGS] and
the sg_set_page() writes land on the destruct_work that follows it, which
the workqueue then calls.
The byte limit is fine because copy drops to 0 and the loop falls through
to the same check; the frag count has no such feedback.
Push the record rather than keep a full one open, which is what a plain
TCP socket does - tcp_sendmsg_locked() uses tcp_mark_push() and
new_segment in both the copy and the MSG_SPLICE_PAGES paths, and tls_sw
already sets full_record when the sk_msg ring fills up, MSG_MORE or not.
BUG: KASAN: slab-out-of-bounds in tls_append_frag ( net/tls/tls_device.c:269)
Write of size 8 at addr ffff8881104d1530 by task tls_oob/450
CPU: 2 UID: 0 PID: 450 Comm: tls_oob Not tainted 7.2.0-rc7+ #329 PREEMPT
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
tls_append_frag (net/tls/tls_device.c:269)
tls_push_data (net/tls/tls_device.c:518)
tls_device_sendmsg (net/tls/tls_device.c:583)
inet_sendmsg (net/ipv4/af_inet.c:865)
sock_sendmsg (net/socket.c:775 net/socket.c:790 net/socket.c:813)
splice_to_socket (fs/splice.c:884)
do_splice (fs/splice.c:936 fs/splice.c:1349)
__do_splice (fs/splice.c:1431)
__x64_sys_splice (fs/splice.c:1634 fs/splice.c:1616)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
and, once the record is pushed:
UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:300:24
index 18 is out of range for type 'skb_frag_t [17]'
UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:301:41
index 18 is out of range for type 'scatterlist [17]'
UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:302:39
index 18 is out of range for type 'scatterlist [17]'
UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:307:38
index 26 is out of range for type 'scatterlist [17]'
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address: ffffea000411a680
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0011) - permissions violation
Oops: Oops: 0011 [#1] SMP KASAN PTI
Workqueue: ktls_device_destruct 0xffffea000411a680
RIP: 0010:0xffffea000411a680
Call Trace:
<TASK>
worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme_tcp_recv_pdu() doesn't check the validity of the header length.
When header digests are enabled, a target might send a packet with an
invalid header length (e.g. 255), causing nvme_tcp_verify_hdgst()
to access memory outside the allocated area and cause memory corruptions
by overwriting it with the calculated digest.
Fix this by rejecting packets with an unexpected header length. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix out-of-bounds access of directory entries
In the case of the directory size is greater than or equal to
the cluster size, if start_clu becomes an EOF cluster(an invalid
cluster) due to file system corruption, then the directory entry
where ei->hint_femp.eidx hint is outside the directory, resulting
in an out-of-bounds access, which may cause further file system
corruption.
This commit adds a check for start_clu, if it is an invalid cluster,
the file or directory will be treated as empty. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb()
For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is
defined as NR_CPUS instead of the number of possible cpus, this
will cause the following system panic:
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
...
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1
...
BUG: unable to handle page fault for address: ffffffff9911c8c8
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W
6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6
RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0
RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082
CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0
Call Trace:
<TASK>
? __die+0x23/0x80
? page_fault_oops+0xa4/0x180
? exc_page_fault+0x152/0x180
? asm_exc_page_fault+0x26/0x40
? rcu_tasks_need_gpcb+0x25d/0x2c0
? __pfx_rcu_tasks_kthread+0x40/0x40
rcu_tasks_one_gp+0x69/0x180
rcu_tasks_kthread+0x94/0xc0
kthread+0xe8/0x140
? __pfx_kthread+0x40/0x40
ret_from_fork+0x34/0x80
? __pfx_kthread+0x40/0x40
ret_from_fork_asm+0x1b/0x80
</TASK>
Considering that there may be holes in the CPU numbers, use the
maximum possible cpu number, instead of nr_cpu_ids, for configuring
enqueue and dequeue limits.
[ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ] |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: fail closed if we can't get max channel used in indirection tables
Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with
active RSS contexts") proves that allowing indirection table to contain
channels with out of bounds IDs may lead to crashes. Currently the
max channel check in the core gets skipped if driver can't fetch
the indirection table or when we can't allocate memory.
Both of those conditions should be extremely rare but if they do
happen we should try to be safe and fail the channel change. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check index for aux_rd_interval before using
aux_rd_interval has size of 7 and should be checked.
This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix possible buffer overflow
struct hci_dev_info has a fixed size name[8] field so in the event that
hdev->name is bigger than that strcpy would attempt to write past its
size, so this fixes this problem by switching to use strscpy. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS
For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off
for validation. However, variable offset ptr alu is not prohibited
for this ptr kind. So the variable offset is not checked.
The following prog is accepted:
func#0 @0
0: R1=ctx() R10=fp0
0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx()
1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys()
2: (b7) r8 = 1024 ; R8_w=1024
3: (37) r8 /= 1 ; R8_w=scalar()
4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,
smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400))
5: (0f) r7 += r8
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024
mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1
mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024
6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off
=(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024,
var_off=(0x0; 0x400))
6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar()
7: (95) exit
This prog loads flow_keys to r7, and adds the variable offset r8
to r7, and finally causes out-of-bounds access:
BUG: unable to handle page fault for address: ffffc90014c80038
[...]
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline]
__bpf_prog_run include/linux/filter.h:651 [inline]
bpf_prog_run include/linux/filter.h:658 [inline]
bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline]
bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991
bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359
bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline]
__sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
__do_sys_bpf kernel/bpf/syscall.c:5561 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
__x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fix this by rejecting ptr alu with variable offset on flow_keys.
Applying the patch rejects the program with "R7 pointer arithmetic
on flow_keys prohibited". |
