| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the management web server of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker with high privileges to execute configuration commands on an affected system.
This vulnerability exists because access to HTTPS endpoints is not properly restricted on an affected device. An attacker could exploit this vulnerability by sending specific messages to the affected HTTPS handler. A successful exploit could allow the attacker to perform configuration changes on the affected system, which should be configured and managed only through Cisco Firepower Management Center (FMC) Software. |
| A vulnerability in the Transport Layer Security version 1.3 (TLS 1.3) policy with URL category functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured TLS 1.3 policy to block traffic for a specific URL. The vulnerability is due to a logic error with Snort handling of the connection with the TLS 1.3 policy and URL category configuration. An attacker could exploit this vulnerability by sending crafted TLS 1.3 connections to an affected device. A successful exploit could allow the attacker to bypass the TLS 1.3 policy and access URLs that are outside the affected device and normally would be dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown
The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is
responsible for releasing the tp_vars reference it holds. However, the
existing logic for coordinating this release with batadv_tp_stop_all() was
flawed.
timer_shutdown_sync() guarantees the timer will not fire again after it
returns, but it returns non-zero only when the timer was pending at the
time of the call. If the timer had already expired (and
batadv_tp_stop_all() would unsucessfully try to rearm itself),
batadv_tp_stop_all() skips its batadv_tp_vars_put(), and
batadv_tp_receiver_shutdown() fails to put its own reference as well.
Fix this by introducing a new atomic variable receiving that is set to 1
when the receiver is initialized and cleared atomically with atomic_xchg()
by whichever side claims it first. Only the side that observes the
transition from 1 to 0 is responsible for releasing the tp_vars timer
reference, eliminating the uncertainty. |
| An elevation of privilege vulnerability exists because of overly permissive Access Control Lists (ACLs) on multiple system files, including the Security Accounts Manager (SAM) database. An attacker who successfully exploited this vulnerability could run arbitrary code with SYSTEM privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
An attacker must have the ability to execute code on a victim system to exploit this vulnerability.
After installing this security update, you must manually delete all shadow copies of system files, including the SAM database, to fully mitigate this vulnerabilty. Simply installing this security update will not fully mitigate this vulnerability. See KB5005357- Delete Volume Shadow Copies. |
| Windows Recovery Environment Agent Elevation of Privilege Vulnerability |
| Windows LSA Spoofing Vulnerability |
| Improper access control in Extensible Storage Engine (ESENT) allows an authorized attacker to elevate privileges locally. |
| Improper authorization in Windows Installer allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: hugetlb: independent PMD page table shared count
The folio refcount may be increased unexpectly through try_get_folio() by
caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount
to check whether a pmd page table is shared. The check is incorrect if
the refcount is increased by the above caller, and this can cause the page
table leaked:
BUG: Bad page state in process sh pfn:109324
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324
flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff)
page_type: f2(table)
raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000
raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000
page dumped because: nonzero mapcount
...
CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7
Tainted: [B]=BAD_PAGE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
dump_stack+0x18/0x28
bad_page+0x8c/0x130
free_page_is_bad_report+0xa4/0xb0
free_unref_page+0x3cc/0x620
__folio_put+0xf4/0x158
split_huge_pages_all+0x1e0/0x3e8
split_huge_pages_write+0x25c/0x2d8
full_proxy_write+0x64/0xd8
vfs_write+0xcc/0x280
ksys_write+0x70/0x110
__arm64_sys_write+0x24/0x38
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
The issue may be triggered by damon, offline_page, page_idle, etc, which
will increase the refcount of page table.
1. The page table itself will be discarded after reporting the
"nonzero mapcount".
2. The HugeTLB page mapped by the page table miss freeing since we
treat the page table as shared and a shared page table will not be
unmapped.
Fix it by introducing independent PMD page table shared count. As
described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390
gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv
pmds, so we can reuse the field as pt_share_count. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: gpio-charger: Fix set charge current limits
Fix set charge current limits for devices which allow to set the lowest
charge current limit to be greater zero. If requested charge current limit
is below lowest limit, the index equals current_limit_map_size which leads
to accessing memory beyond allocated memory. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: j1939_session_new(): fix skb reference counting
Since j1939_session_skb_queue() does an extra skb_get() for each new
skb, do the same for the initial one in j1939_session_new() to avoid
refcount underflow.
[mkl: clean up commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
vp_vdpa: fix id_table array not null terminated error
Allocate one extra virtio_device_id as null terminator, otherwise
vdpa_mgmtdev_get_classes() may iterate multiple times and visit
undefined memory. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_socket: fix sk refcount leaks
We must put 'sk' reference before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG_ON() when 0 reference count at btrfs_lookup_extent_info()
Instead of doing a BUG_ON() handle the error by returning -EUCLEAN,
aborting the transaction and logging an error message. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix return value of f2fs_convert_inline_inode()
If device is readonly, make f2fs_convert_inline_inode()
return EROFS instead of zero, otherwise it may trigger
panic during writeback of inline inode's dirty page as
below:
f2fs_write_single_data_page+0xbb6/0x1e90 fs/f2fs/data.c:2888
f2fs_write_cache_pages fs/f2fs/data.c:3187 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3342 [inline]
f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3369
do_writepages+0x359/0x870 mm/page-writeback.c:2634
filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397
__filemap_fdatawrite_range mm/filemap.c:430 [inline]
file_write_and_wait_range+0x1aa/0x290 mm/filemap.c:788
f2fs_do_sync_file+0x68a/0x1ae0 fs/f2fs/file.c:276
generic_write_sync include/linux/fs.h:2806 [inline]
f2fs_file_write_iter+0x7bd/0x24e0 fs/f2fs/file.c:4977
call_write_iter include/linux/fs.h:2114 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xa72/0xc90 fs/read_write.c:590
ksys_write+0x1a0/0x2c0 fs/read_write.c:643
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: Fix of_k3_udma_glue_parse_chn_by_id()
The of_k3_udma_glue_parse_chn_by_id() helper function erroneously
invokes "of_node_put()" on the "udmax_np" device-node passed to it,
without having incremented its reference count at any point. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr()
Requests the vchan lock before using xdma->stop_request. |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix refcount imbalance on inbound connections
When releasing a socket in ax25_release(), we call netdev_put() to
decrease the refcount on the associated ax.25 device. However, the
execution path for accepting an incoming connection never calls
netdev_hold(). This imbalance leads to refcount errors, and ultimately
to kernel crashes.
A typical call trace for the above situation will start with one of the
following errors:
refcount_t: decrement hit 0; leaking memory.
refcount_t: underflow; use-after-free.
And will then have a trace like:
Call Trace:
<TASK>
? show_regs+0x64/0x70
? __warn+0x83/0x120
? refcount_warn_saturate+0xb2/0x100
? report_bug+0x158/0x190
? prb_read_valid+0x20/0x30
? handle_bug+0x3e/0x70
? exc_invalid_op+0x1c/0x70
? asm_exc_invalid_op+0x1f/0x30
? refcount_warn_saturate+0xb2/0x100
? refcount_warn_saturate+0xb2/0x100
ax25_release+0x2ad/0x360
__sock_release+0x35/0xa0
sock_close+0x19/0x20
[...]
On reboot (or any attempt to remove the interface), the kernel gets
stuck in an infinite loop:
unregister_netdevice: waiting for ax0 to become free. Usage count = 0
This patch corrects these issues by ensuring that we call netdev_hold()
and ax25_dev_hold() for new connections in ax25_accept(). This makes the
logic leading to ax25_accept() match the logic for ax25_bind(): in both
cases we increment the refcount, which is ultimately decremented in
ax25_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix netdev refcount issue
The dev_tracker is added to ax25_cb in ax25_bind(). When the
ax25 device is detaching, the dev_tracker of ax25_cb should be
deallocated in ax25_kill_by_device() instead of the dev_tracker
of ax25_dev. The log reported by ref_tracker is shown below:
[ 80.884935] ref_tracker: reference already released.
[ 80.885150] ref_tracker: allocated in:
[ 80.885349] ax25_dev_device_up+0x105/0x540
[ 80.885730] ax25_device_event+0xa4/0x420
[ 80.885730] notifier_call_chain+0xc9/0x1e0
[ 80.885730] __dev_notify_flags+0x138/0x280
[ 80.885730] dev_change_flags+0xd7/0x180
[ 80.885730] dev_ifsioc+0x6a9/0xa30
[ 80.885730] dev_ioctl+0x4d8/0xd90
[ 80.885730] sock_do_ioctl+0x1c2/0x2d0
[ 80.885730] sock_ioctl+0x38b/0x4f0
[ 80.885730] __se_sys_ioctl+0xad/0xf0
[ 80.885730] do_syscall_64+0xc4/0x1b0
[ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 80.885730] ref_tracker: freed in:
[ 80.885730] ax25_device_event+0x272/0x420
[ 80.885730] notifier_call_chain+0xc9/0x1e0
[ 80.885730] dev_close_many+0x272/0x370
[ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180
[ 80.885730] unregister_netdev+0xcf/0x120
[ 80.885730] sixpack_close+0x11f/0x1b0
[ 80.885730] tty_ldisc_kill+0xcb/0x190
[ 80.885730] tty_ldisc_hangup+0x338/0x3d0
[ 80.885730] __tty_hangup+0x504/0x740
[ 80.885730] tty_release+0x46e/0xd80
[ 80.885730] __fput+0x37f/0x770
[ 80.885730] __x64_sys_close+0x7b/0xb0
[ 80.885730] do_syscall_64+0xc4/0x1b0
[ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 80.893739] ------------[ cut here ]------------
[ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0
[ 80.894297] Modules linked in:
[ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11
[ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4
[ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0
[ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9
[ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286
[ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000
[ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518
[ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a
[ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4
[ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518
[ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000
[ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0
...
[ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at
[ 80.935774] ax25_bind+0x424/0x4e0
[ 80.935774] __sys_bind+0x1d9/0x270
[ 80.935774] __x64_sys_bind+0x75/0x80
[ 80.935774] do_syscall_64+0xc4/0x1b0
[ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f
Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb
in order to mitigate the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_flow_offload: reset dst in route object after setting up flow
dst is transferred to the flow object, route object does not own it
anymore. Reset dst in route object, otherwise if flow_offload_add()
fails, error path releases dst twice, leading to a refcount underflow. |
