| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IEEE P802.11-REVme D1.1 through D7.0 allows FragAttacks against mesh networks. In mesh networks using Wi-Fi Protected Access (WPA, WPA2, or WPA3) or Wired Equivalent Privacy (WEP), an adversary can exploit this vulnerability to inject arbitrary frames towards devices that support receiving non-SSP A-MSDU frames. NOTE: this issue exists because of an incorrect fix for CVE-2020-24588. P802.11-REVme, as of early 2025, is a planned release of the 802.11 standard. |
| Vela is a Pipeline Automation (CI/CD) framework built on Linux container technology written in Golang. Prior to versions 0.25.3 and 0.26.3, by spoofing a webhook payload with a specific set of headers and body data, an attacker could transfer ownership of a repository and its repo level secrets to a separate repository. These secrets could be exfiltrated by follow up builds to the repository. Users with an enabled repository with access to repo level CI secrets in Vela are vulnerable to the exploit, and any user with access to the CI instance and the linked source control manager can perform the exploit. Versions 0.25.3 and 0.26.3 fix the issue. No known workarounds are available. |
| An insufficiently secured internal function allows session generation for arbitrary users. The decodeParam function checks the JWT but does not verify which signing algorithm was used. As a result, an attacker can use the "ex:action" parameter in the VerifyUserByThrustedService function to generate a session for any user. |
| In the KDE Connect information-exchange protocol before 2025-04-18, a packet can be crafted to temporarily change the displayed information about a device, because broadcast UDP is used. This affects KDE Connect before 1.33.0 on Android, KDE Connect before 25.04 on desktop, KDE Connect before 0.5 on iOS, Valent before 1.0.0.alpha.47, and GSConnect before 59. |
| Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) allows unauthenticated users to upload backup files to the system. While signature validation is implemented, weaknesses in the validation process can be exploited to upload malicious backup content that could compromise system integrity. |
| "This issue is limited to motherboards and does not affect laptops, desktop computers, or other endpoints." An insufficient validation in ASUS DriverHub may allow unauthorized sources to interact with the software's features via crafted HTTP requests.
Refer to the 'Security Update for ASUS DriverHub' section on the ASUS Security Advisory for more information. |
| Authen::DigestMD5 versions 0.01 through 0.02 for Perl generate the cnonce insecurely.
The cnonce (client nonce) is generated from an MD5 hash of the PID, the epoch time and the built-in rand function. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
According to RFC 2831, "The cnonce-value is an opaque quoted string value provided by the client and used by both client and server to avoid chosen plaintext attacks, and to provide mutual authentication. The security of the implementation depends on a good choice. It is RECOMMENDED that it contain at least 64 bits of entropy." |
| Plack-Middleware-Session before version 0.35 for Perl generates session ids insecurely.
The default session id generator returns a SHA-1 hash seeded with the built-in rand function, the epoch time, and the PID. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
Predicable session ids could allow an attacker to gain access to systems. |
| Catalyst::Plugin::Session before version 0.44 for Perl generates session ids insecurely.
The session id is generated from a (usually SHA-1) hash of a simple counter, the epoch time, the built-in rand function, the PID and the current Catalyst context. This information is of low entropy. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
Predicable session ids could allow an attacker to gain access to systems. |
| Starch versions 0.14 and earlier generate session ids insecurely.
The default session id generator returns a SHA-1 hash seeded with a counter, the epoch time, the built-in rand function, the PID, and internal Perl reference addresses. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
Predicable session ids could allow an attacker to gain access to systems. |
| Catalyst::Authentication::Credential::HTTP versions 1.018 and earlier for Perl generate nonces using the Perl Data::UUID library.
* Data::UUID does not use a strong cryptographic source for generating UUIDs.
* Data::UUID returns v3 UUIDs, which are generated from known information and are unsuitable for security, as per RFC 9562.
* The nonces should be generated from a strong cryptographic source, as per RFC 7616. |
| Apache::AuthAny::Cookie v0.201 or earlier for Perl generates session ids insecurely.
Session ids are generated using an MD5 hash of the epoch time and a call to the built-in rand function. The epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
Predicable session ids could allow an attacker to gain access to systems. |
| A logic error exists in the Falcon sensor for Windows that could allow an attacker, with the prior ability to execute code on a host, to delete arbitrary files. CrowdStrike released a security fix for this issue in Falcon sensor for Windows versions 7.24 and above and all Long Term Visibility (LTV) sensors.
There is no indication of exploitation of these issues in the wild. Our threat hunting and intelligence teams are actively monitoring for exploitation and we maintain visibility into any such attempts.
The Falcon sensor for Mac, the Falcon sensor for Linux and the Falcon sensor for Legacy Systems are not impacted by this.
CrowdStrike was made aware of this issue through our HackerOne bug bounty program. It was discovered by Cong Cheng and responsibly disclosed. |
| Due to the lack of randomness in assigning Object Identifiers in the SAP NetWeaver AS JAVA IIOP service, an authenticated attacker with low privileges could predict the identifiers by conducting a brute force search. By leveraging knowledge of several identifiers generated close to the same time, the attacker could determine a desired identifier which could enable them to access limited system information. This poses a low risk to confidentiality without impacting the integrity or availability of the service. |
| A potential vulnerability was reported in the Lenovo 510 FHD and Performance FHD web cameras that could allow an attacker with physical access to write arbitrary firmware updates to the device over a USB connection. |
| Bypass Connection Restriction vulnerability in Hitachi Infrastructure Analytics Advisor (Data Center Analytics component), Hitachi Ops Center Analyzer (Hitachi Ops Center Analyzer detail view component).This issue affects Hitachi Infrastructure Analytics Advisor:; Hitachi Ops Center Analyzer: from 10.0.0-00 before 11.0.4-00. |
| The optional feature 'Anti-Virus & Sandbox' of i-FILTER contains an issue with improper pattern file validation. If exploited, the product may treat an unauthorized pattern file as an authorized. If the product uses a specially crafted pattern file, information in the server where the product is running may be retrieved, and/or cause a denial of service (DoS) condition. |
| Hosts listed in TrustedOrigins implicitly allow requests from the corresponding HTTP origins, allowing network MitMs to perform CSRF attacks. After the CVE-2025-24358 fix, a network attacker that places a form at http://example.com can't get it to submit to https://example.com because the Origin header is checked with sameOrigin against a synthetic URL. However, if a host is added to TrustedOrigins, both its HTTP and HTTPS origins will be allowed, because the schema of the synthetic URL is ignored and only the host is checked. For example, if an application is hosted on https://example.com and adds example.net to TrustedOrigins, a network attacker can serve a form at http://example.net to perform the attack. Applications should migrate to net/http.CrossOriginProtection, introduced in Go 1.25. If that is not an option, a backport is available as a module at filippo.io/csrf, and a drop-in replacement for the github.com/gorilla/csrf API is available at filippo.io/csrf/gorilla. |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. Startinf in version 5.0.1 and prior to versions 5.11.3 and 6.1.1, a maliciously modified message can be passed to either `openpgp.verify` or `openpgp.decrypt`, causing these functions to return a valid signature verification result while returning data that was not actually signed. This flaw allows signature verifications of inline (non-detached) signed messages (using `openpgp.verify`) and signed-and-encrypted messages (using `openpgp.decrypt` with `verificationKeys`) to be spoofed, since both functions return extracted data that may not match the data that was originally signed. Detached signature verifications are not affected, as no signed data is returned in that case. In order to spoof a message, the attacker needs a single valid message signature (inline or detached) as well as the plaintext data that was legitimately signed, and can then construct an inline-signed message or signed-and-encrypted message with any data of the attacker's choice, which will appear as legitimately signed by affected versions of OpenPGP.js. In other words, any inline-signed message can be modified to return any other data (while still indicating that the signature was valid), and the same is true for signed+encrypted messages if the attacker can obtain a valid signature and encrypt a new message (of the attacker's choice) together with that signature. The issue has been patched in versions 5.11.3 and 6.1.1. Some workarounds are available. When verifying inline-signed messages, extract the message and signature(s) from the message returned by `openpgp.readMessage`, and verify the(/each) signature as a detached signature by passing the signature and a new message containing only the data (created using `openpgp.createMessage`) to `openpgp.verify`. When decrypting and verifying signed+encrypted messages, decrypt and verify the message in two steps, by first calling `openpgp.decrypt` without `verificationKeys`, and then passing the returned signature(s) and a new message containing the decrypted data (created using `openpgp.createMessage`) to `openpgp.verify`. |
| On Wear OS devices, when Google Messages is configured as the default SMS/MMS/RCS application, the handling of ACTION_SENDTO intents utilizing the sms:, smsto:, mms:, and mmsto: Uniform Resource Identifier (URI) schemes is incorrectly implemented.
Due to this misconfiguration, an attacker capable of invoking an Android intent can exploit this vulnerability to send messages on the user’s behalf to arbitrary receivers without requiring any further user interaction or specific permissions. This allows for the silent and unauthorized transmission of messages from a compromised Wear OS device. |
