| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: skip eviction of a BO with no resource
xe_evict_flags() switches on tbo->resource->mem_type to choose an
eviction placement. An xe BO can reach eviction with no ttm.resource,
e.g. an imported dma-buf BO whose resource was freed during teardown
while its attachment is still live: the exporter then invalidates it via
xe_dma_buf_move_notify() -> xe_bo_evict(), and the switch dereferences a
NULL resource and faults.
A BO with no resource has nothing placed or mapped, so there is nothing
to evict. Return an empty placement (num_placement = 0), mirroring the
handling already used for non-xe scatter-gather BOs just above;
ttm_bo_validate() then takes the pipeline-gutting path and returns 0.
Without the fix the xe_dma_buf@xe_test_dmabuf_move_notify_no_resource
dynamic live selftest will fail with below stack.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:xe_evict_flags+0xf4/0x140 [xe]
Call Trace:
<TASK>
xe_bo_evict+0x40/0xa0 [xe]
? ttm_bo_pipeline_gutting+0x71/0x180 [ttm]
xe_test_dmabuf_move_notify_no_resource+0x182/0x440 [xe]
xe_dma_buf_kunit+0x387/0x580 [xe]
v2: Add Fixes tag and failure info in commit text (Matt Brost)
(cherry picked from commit dbcfaac6331f1fcb0c2fe3ad3e9adb1e5d43ec0c) |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: prevent unregistering a power supply while a callback runs
Once a power supply is registered, its callbacks can immediately start
firing from other contexts, such as external_power_changed() triggered by
the TCPM stack. If a power supply is unregistered while the callback is
still running, the driver data can already be freed when the callback
tries to access it, leading to a use-after-free.
This happens e.g. when the hardware bus carrying the power supply device
malfunctions (e.g. I2C is hogged down by another malfunctioning device)
immediately after the power supply is registered, and thus the core is
still processing the callbacks which were queued up when the driver
starts the removal, leading in some cases to a kernel crash, e.g.:
[ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005
[ 11.646751] Mem abort info:
[ 11.647006] ESR = 0x0000000096000004
[ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits
[ 11.647806] SET = 0, FnV = 0
[ 11.648077] EA = 0, S1PTW = 0
[ 11.648356] FSC = 0x04: level 0 translation fault
[ 11.648785] Data abort info:
[ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0
[ 11.650390] [0000000000000005] user address but active_mm is swapper
[ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP
[ 11.651460] Modules linked in:
[ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT
[ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT)
[ 11.653024] Workqueue: events power_supply_changed_work
[ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100
[ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8
[ 11.655098] sp : ffff80008192bb30
[ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000
[ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28
[ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62
[ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000
[ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000
[ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590
[ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0
[ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000
[ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000
[ 11.661878] Call trace:
[ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P)
[ 11.662596] __power_supply_am_i_supplied+0x40/0xb8
[ 11.663040] psy_for_each_psy_cb+0x20/0x40
[ 11.663416] class_for_each_device+0x110/0x150
[ 11.663825] power_supply_am_i_supplied+0x68/0x100
[ 11.664262] bq257xx_external_power_changed+0x58/0x140
[ 11.664733] __power_supply_changed_work+0x60/0x80
[ 11.665170] psy_for_each_psy_cb+0x20/0x40
[ 11.665545] class_for_each_device+0x110/0x150
[ 11.665953] power_supply_changed_work+0x98/0x1b8
[ 11.666382] process_one_work+0x164/0x4c0
[ 11.666758] worker_thread+0x19c/0x320
[ 11.667104] kthread+0x138/0x150
[ 11.667408] ret_from_fork+0x10/0x20
[ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34)
[ 11.668294] ---[ end trace 0000000000000000 ]---
Add a read-write semaphore between external_power_changed() and
power_supply_unregister() to prevent the latter from returning (and thus
the driver from freeing its data) while the callback is still running. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: propagate DACL parsing errors
parse_dacl() silently accepts truncated ACEs and allocation failures,
allowing set_info_sec() to continue with an incomplete ACL conversion.
Return parsing and allocation errors to parse_sec_desc() so malformed
security descriptors are rejected before inode attributes or ACL xattrs
are updated. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF
snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation
with an mmap_count check performed under the PCM stream lock, but the
lock is released long before the buffer is actually freed:
snd_pcm_sync_stop(), constraint refinement and do_free_pages() all
happen in between. snd_pcm_mmap_data(), on the other hand, takes no
lock at all: it validates against the old buffer's state and
dma_bytes, remaps its pages into the VMA, and only then increments
mmap_count.
A concurrent mmap() can therefore slip in between the check and the
free. remap_pfn_range() installs writable PTEs for the old buffer's
pages without taking page references, and the subsequent
do_free_pages() returns those pages to the page allocator while the
VMA still maps them. This leaves a stale, writable mapping of freed
pages: a page-level use-after-free that can be leveraged for local
privilege escalation.
Make snd_pcm_mmap_data() participate in the buffer-access scheme
introduced for hw_params/hw_free: acquire runtime->buffer_accessing
before validating and remapping, and release it afterwards. Buffer
reallocation already fails with -EBUSY while accessors are active,
and the mmap side now fails with -EBUSY while a reallocation is in
progress, so the validate/remap sequence and the check/free sequence
can no longer interleave.
A reproducer that turns this race into a stale writable mapping of
the freed DMA buffer pages is available on request. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix potential UAF/KASAN warning
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix readahead synchronisation issues by loading all folios upfront
There are some synchronisation issues that derive from the app thread
adding more folios to the rolling buffer whilst the collector thread is
looking at them or trying to clear them, such as determining the setting of
front_folio_order when the next folio hasn't been added yet,
The reason for the rolling buffer approach is that loading the buffer
upfront and then dropping all the refs just acquired is quite a slow
operation, and loading progressively allows some of the cost to be deferred
until after at least some of the I/O is started.
Instead, a better way is to load all the folios into the rolling buffer
upfront - and then drop the refs later, once the I/O is in progress. (Even
better would be for the refs not to be there at all.)
Fix this by changing the rolling buffer loader to load all the folios
selected by the VM for readahead upfront into the folio queue. The folio
queue is allocated a batch worth at a time as we don't know how many folios
are involved (the readahead_control struct, alas, has a page count, not a
folio count).
The folio refs acquired from readahead are then dropped in bulk once the
first subrequest is dispatched as it's quite a slow operation. The
collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it
doesn't unlock folios before the xarray has been scanned for them.
This simplifies the buffer handling later and isn't noticeably slower as
the xarray doesn't need to be modified and the folios are all already
pre-locked. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: aeroflex: move setting of netops to fix crash
greth_of_probe() calls greth_mdio_init(), which connects the PHY,
before dev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: actions: Move setting of netops to fix crash
owl_emac_probe() calls owl_emac_phy_init(), which connects the PHY,
before netdev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: hisilicon: hisi_femac: Move setting of netops to fix crash
hisi_femac_drv_probe() connects the PHY before dev->netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
phy_link_topo_add_phy from phy_attach_direct+0xec/0x37c
of_phy_get_and_connect from hisi_femac_drv_probe+0x1f4/0x558
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: search every core slot when a core is removed
rocket_remove() decrements rdev->num_cores for each core it removes,
while find_core_for_dev() searches slots 0 to num_cores - 1. Unbinding
the cores in the order they were bound therefore loses the last one: by
the time it is removed the search range has already shrunk past its
slot, so find_core_for_dev() returns -1 and rocket_remove() gives up
without doing anything.
num_cores never reaches zero, rocket_device_fini() never runs, and the
file-scoped rdev keeps pointing at a device that is going away. Binding
the cores again starts from that stale count, because rocket_probe()
takes rdev->num_cores as the slot to fill. On an RK3588, which describes
three cores, the second round lands on slots 1, 2 and 3 while rdev->cores
was allocated with room for three:
rocket fdab0000.npu: Rockchip NPU core 1 version: 1179210309
rocket fdac0000.npu: Rockchip NPU core 2 version: 1179210309
rocket fdad0000.npu: Rockchip NPU core 3 version: 1179210309
The write to rdev->cores[3] is past the end of the array.
Nothing in tree reads the core array often enough to notice, so the
overrun is silent today. It turned up while testing a devfreq series on
top of this, where a worker walks every core a few times a second, and
UBSAN caught the first bool it read out of the overrun entry:
UBSAN: invalid-load in drivers/accel/rocket/rocket_devfreq.c:47:10
load of value 5 is not a valid value for type '_Bool'
Workqueue: devfreq_wq devfreq_monitor
Record how many slots were allocated and search all of them. Every core
is then found on removal, num_cores reaches zero, the device is torn down
and a later bind starts from a clean rdev.
This does not make unbinding a single core out of several work. probe
still takes num_cores as the slot to fill, so rebinding one core while
its siblings stay bound would write over a slot that is already in use,
and rocket_open() still reaches for cores[0] whether or not anything is
there. Both of those want more thought than a fix should carry.
Found by unbinding and rebinding all three cores on an Orange Pi 5 Plus.
With this applied, 25 unbind/rebind rounds and 5 module unload/reload
rounds run clean there: the cores land in slots 0, 1 and 2 every time,
whichever order they are bound in, and the shared supply goes back to a
single user after each round. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/insn-eval: Fix shadowed segment index in get_seg_reg_override_idx()
Commit 45e1dccc0653 ("x86/insn: Simplify for_each_insn_prefix()") made
for_each_insn_prefix() declare its own loop counter named idx.
get_seg_reg_override_idx() keeps its result in a local of the same name,
so the assignments in the loop body now write the loop counter:
- the function always returns INAT_SEG_REG_DEFAULT, so FS and GS
overrides are ignored;
- a CS override sets the counter to INAT_SEG_REG_CS (2), the increment
makes it 3, and prefixes.bytes[3] holds the last prefix, 0x2e again,
so the loop never terminates.
The UMIP emulation reaches this from the #GP handler for user space: an
SGDT, SIDT or SMSW with a memory operand and a CS prefix leaves the task
spinning in the kernel, never returning to user space, with a SIGKILL
that is never delivered. Any user can thus tie up CPUs until reboot.
With an FS or GS prefix, the emulated result is written to the wrong
address.
Rename the internal macro iterator variable.
[ Lukas' original patch renamed the use site, I changed it to rename the
iterator in the macro instead, but left Lukas' commit message and
authorship - Linus ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethoc: move setting of netops to fix crash
ethoc_probe() calls ethoc_mdio_probe(), which connects the PHY,
before netdev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move setting of netops to fix crash
au1000_probe() calls au1000_mii_probe(), which connects the PHY,
before dev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mv643xx: move setting of netops to fix crash
mv643xx_eth_probe() connects the PHY before dev->netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL sink dereference in USB4 bandwidth functions
allocate_usb4_bandwidth_for_stream() and allocate_usb4_bandwidth() both
use ASSERT(stream->sink) before dereferencing stream->sink->link. ASSERT
is compiled out in production builds, so a NULL stream->sink causes a
NULL pointer dereference.
link_set_dpms_off() already guards two earlier accesses to stream->sink
with explicit NULL checks, confirming that stream->sink can legitimately
be NULL. The subsequent call to deallocate_usb4_bandwidth() had no
equivalent guard.
Replace the ASSERT() calls with proper NULL checks that return false
early, and add a matching stream->sink guard at the call site in
link_set_dpms_off() consistent with the surrounding pattern.
v2: Keep the existing ASSERT() calls for diagnostics (to report
unexpected NULL sink), and add explicit NULL checks that return false
before dereferencing stream->sink. Also add a matching stream->sink
guard at the deallocation call site in link_set_dpms_off(). (Alex)
(cherry picked from commit 98029a0ce61feb52c563f65349dd9b25f672e355) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: fix missing length checks in hidp_input_report()
hidp_input_report() reads keyboard and mouse payload data from an skb
without first verifying that skb->len contains enough data.
hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching
to hidp_input_report(). If a paired device sends a truncated packet,
the handler reads beyond the valid skb data, resulting in an
out-of-bounds read of skb data. The OOB bytes may be interpreted as
phantom key presses or spurious mouse movement.
Replace the open-coded length tracking and pointer arithmetic with
skb_pull_data() calls. skb_pull_data() returns NULL if the requested
bytes are not present, eliminating the need for a manual size variable
and the separate skb->len guard. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Check per-CPU register page before mmap
Register-page setup is optional for each CPU. If allocation or
registration fails, mshv_vtl_configure_reg_page() warns and leaves that
CPU's reg_page NULL, but initial context setup continues successfully.
Meanwhile, successful setup on another CPU sets the global
mshv_has_reg_page flag.
mshv_vtl_fault() checks this global flag before selecting the requested
CPU's register page. With mixed setup results across online CPUs, the
check passes even for a CPU with no register page, reaching
get_page(NULL) when userspace faults in that mapping.
Check the selected per-CPU register page before taking its reference and
return VM_FAULT_SIGBUS if it is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: actually validate userq BOs
This was supposed to loop over the individual evicted list, as the
kernel and always_valid evicted lists were already handled in
amdgpu_vm_validate.
Without this, BOs that were created and evicted before a userq was made
would never end up in an eviction fence rearm.
Also add the missing ref to the BO before drm_exec locks and refs it.
(cherry picked from commit 18decfc9e8cc0fa70b6de9944cc27a37729edfbd) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash in print_graph_function_event()
tracing_set_tracer() assigns the flags of the newly selected tracer
with:
tr->current_trace_flags = t->flags ? : t->tracer->flags;
If the new tracer defines neither static flags nor default flags, like
hwlat, irqsoff or wakeup, add_tracer() has no per instance flags copy
for it, and both operands are NULL, so tr->current_trace_flags ends up
being NULL as well.
The ring buffer is not cleared when switching tracers: it is reset
inside tracer_init(), after current_trace_flags was already assigned.
If the buffer still holds function_graph entries of the previous
tracer, printing one of them dereferences the NULL pointer. This was
hit by cat trace during an ftrace stress test:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
RIP: 0010:print_graph_function_event+0xe/0x20
Call Trace:
s_show+0x4d/0x110
seq_read_iter+0x2d4/0x490
seq_read+0x130/0x170
vfs_read+0xb5/0x370
ksys_read+0x6d/0xe0
do_syscall_64+0xbc/0x450
The snapshot buffer is not reset at all, so this can be reproduced
without a race:
echo function_graph > /sys/kernel/tracing/current_tracer
echo 1 > /sys/kernel/tracing/snapshot
echo hwlat > /sys/kernel/tracing/current_tracer
cat /sys/kernel/tracing/snapshot
Rather than teaching every user of tr->current_trace_flags about this
corner case, make sure it is never NULL: when the newly selected
tracer has no flags at all, tracing_set_tracer() falls back to a
static empty no_tracer_flags. run_tracer_selftest() can hit the same
case, so the same fallback is added there too. The existing users
already handle opts == NULL, so these tracers keep behaving as before. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue
A deferred reenqueue can read a freed user DSQ. The request stays on its
CPU's deferred list until run_deferred() takes it, and the RCU callback that
frees the DSQ assumes that the grace period has flushed it, so exit_dsq()
checks the per-CPU node without the deferred list lock. A grace period waits
for readers in flight, not for a pending run_deferred(). A run_deferred()
which starts after the grace period began can detach the request right
before the callback looks and then read the freed DSQ's id.
Cancel the pending requests before the grace period instead. The irq work
that frees the DSQ unlinks every CPU's request under the per-CPU deferred
list lock, and schedule_dsq_reenq() ignores a new request under the same
lock once the id is invalid. Only a run_deferred() that started before the
grace period can hold a request, and it runs with IRQs disabled, so the
grace period waits for it and nothing touches the DSQ after the callback. |
