| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| @fastify/oauth2 is a Fastify wrapper for OAuth2 login flows. In versions 7.2.0 through 8.3.1, the state and code-verifier cookies are set without a Path attribute at a login route with two or more path segments, while the clearing step at the OAuth callback writes them with a root path, so the original cookies survive the callback and the documented single-use guarantee for the state value does not hold. A state value an attacker learns stays valid for the rest of the browser session, letting the attacker drive their own authorization flow in the victim's browser and sign the victim in to the attacker's account (login CSRF). The issue is fixed in @fastify/oauth2 8.3.2, and users should upgrade to 8.3.2 or later. As a workaround, set an explicit cookie path so the set and the clear name the same cookie. |
| Netskope is notified about a potential gap in its agent (NSClient) where a system with Netskope Client while connecting to an access point with Captive Portal switches to a Network which already has internet connectivity, the Captive Portal does not close. This allows the possibility of abuse via the Captive Portal using a rogue access point to either access malicious sites or exfiltrate data.The issue impacts all versions prior to R142 |
| IBM Cyber Fraud 1.0.0 through 1.0.2 has a missing secure attribute allowing sensitive cookies to be transmitted over unencrypted connections, potentially enabling an attacker to intercept session data through network-based attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a04f5d
("net: fix removing a namespace with conflicting altnames") fixed it.
cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix.
Let's generalise the fix by removing conflicting altnames for dying
netns in __dev_change_net_namespace().
[0]:
cfg80211_switch_netns(rdev, &init_net)
WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160
Modules linked in:
CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: netns cleanup_net
RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871
Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e
RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293
RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000
R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000
R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20
FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253
cleanup_net+0x572/0x810 net/core/net_namespace.c:706
process_one_work kernel/workqueue.c:3387 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject legacy packet loads from callbacks
check_ld_abs() models a failed BPF_LD_ABS or BPF_LD_IND in a
subprogram as an implicit return with R0 set to zero. It calls
prepare_func_exit() to explore this synthesized path.
When the load is reached directly from a synchronous callback,
prepare_func_exit() enforces the callback return contract and marks R0
precise. R0 is not derived from a real instruction on this path, so
precision backtracking reaches the callback call with R0 still requested
and triggers the "callback unexpected regs" verifier bug. A privileged
program loader can therefore cause a verifier warning and an -EFAULT
BPF_PROG_LOAD.
These legacy packet-load instructions are deprecated. Reject them from
callbacks rather than complicating their implicit-return model. Check all
active frames before constructing the implicit return so nested static
subprograms cannot hide the callback context.
Global functions are verified independently with a fresh frame zero, so
an active-frame check cannot identify a global function called from a
callback. Also check the complete subprogram call graph during stack-depth
validation and reject a function containing a legacy load when any caller
is a callback. This covers global and static descendants without making
has_ld_abs transitive, preserving its per-function BTF return-type check.
Ordinary uses outside callbacks remain supported. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()
A NULL pointer dereference in klist_put() occurs when a child device (such
as a BNEP network device in bnep_session) is concurrently being
unregistered while hci_conn_del_sysfs() reparents child devices.
This is caused by a race condition between hci_conn_del_sysfs() and
concurrent child device unregistration (e.g. bnep_session calling
unregister_netdev()). During device unregistration, device_del() snapshots
a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the
child device using device_find_any_child() and calls device_move() to
reparent it to NULL, which removes the node from its parent's klist and
clears knode_parent. Subsequently, device_del() calls
klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing
klist_put() to dereference knode_klist(n)->put on an already removed node,
resulting in a NULL pointer dereference.
This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix
use-after-free in device_for_each_child()"), which replaced
device_find_child(..., __match_tty) with device_find_any_child() in
hci_conn_del_sysfs(). That change was intended to avoid a use-after-free
where conn->dev outlived its parent hdev->dev when child devices held
references to conn->dev, because conn->dev only held a reference to
hdev->dev while registered in sysfs.
Fix the issue properly by taking an explicit reference to the parent device
with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with
put_device(parent) in bt_link_release() when the conn device is freed. This
ensures that hdev->dev remains valid for the entire lifecycle of conn->dev,
resolving the underlying use-after-free. With the parent reference held
properly, restore the __match_tty filter in hci_conn_del_sysfs() so that
device_move() is only invoked on persistent RFCOMM TTY devices as
originally intended, eliminating the race condition with unregistering
network devices. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Move representor vnic reporter to eswitch devlink port
The representor vnic devlink health reporter is created and destroyed
along the representor netdev (un)load path, which is not serialized by
the devlink instance lock. Destroying the reporter from there triggers
a devl_assert_locked() splat on driver unbind:
WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758
Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ...
CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ...
RIP: 0010:devl_assert_locked+0x54/0x70
Call Trace:
<TASK>
devl_health_reporter_destroy+0x3a/0x1b0
mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core]
? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core]
? kernfs_remove_by_name_ns+0xc3/0xf0
device_release_driver_internal+0x3b2/0x560
unbind_store+0xce/0xf0
Move the reporter's lifecycle to the eswitch devlink port (un)register
paths, which are already serialized by the devlink instance lock, and
store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the
reporter priv since the diagnose callback only needs a device handle and
a vport number, and mlx5_vport carries both and is initialized before
any representor driver probes. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: replace forgeable discard filler with a keyed sector marker
The discard-block check in dm_integrity_rw_tag() treats a stored tag
of all 0xf6 bytes (DISCARD_FILLER) as proof a block was discarded and
skips HMAC verification. allow_discards is only accepted in
dm-integrity's standalone mode. An attacker with raw write access to
the backing device, but without the integrity key, can stamp any block
with an all-0xf6 tag and have it served as authentic.
Add a new "allow_discards_keyed" target argument that marks discarded
blocks with a keyed checksum of (salt || sector) instead, computed by
integrity_discard_checksum(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ptp: don't WARN when controlling PF is unavailable
In VFIO passthrough setups, it is possible to pass through only a PF
which doesn't own the source timer. In that case the PTP controlling PF
(adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp()
returns NULL and triggers WARN_ON() in ice_ptp_setup_pf().
Since this is an expected behavior in that configuration, replace
WARN_ON() with an informational message and return -EOPNOTSUPP. |
| A vulnerability could allow an attacker to send a crafted message to trigger an assertion fault, causing the service to crash. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: ensure sufficient headroom in vlan_dev_hard_header()
Callers that only reserve ETH_HLEN or less (such as llc_alloc_frame()),
or skbs allocated before dynamic device/headroom changes (e.g. toggling
VLAN_FLAG_REORDER_HDR or bonding/team switching slaves), can reach
vlan_dev_hard_header() with insufficient headroom and trigger
skb_under_panic().
Use skb_cow_head() in vlan_dev_hard_header() when VLAN_FLAG_REORDER_HDR
is not set to ensure sufficient headroom for the VLAN header(s) and the
underlying device hard header.
Use READ_ONCE() to read dev->hard_header_len and dev->needed_headroom as
they can be updated concurrently under RTNL (e.g. in
vlan_transfer_features()) while vlan_dev_hard_header() runs locklessly on
the transmit path. Also avoid LL_RESERVED_SPACE(dev) here so that the
extra HH_DATA_MOD alignment padding does not trigger unnecessary
pskb_expand_head() reallocations on inner stacked VLAN devices after the
outer VLAN header has been pushed. |
| In Eclipse OpenJ9 versions up to 0.63, opening a supplied diagnostic dump bundle with the jdmpview tool, or equivalent DTFJ code, may cause the analyst's machine to read an arbitrary local file named inside the bundle and send its contents to an arbitrary remote host. |
| Tokens associated with user sessions are not revoked when the corresponding user session is terminated, unless another SSO request is initiated. This occurs when the session-bound token feature is enabled with token binding validation and the "Revoke token upon user logout" option is not active. The software fails to automatically invalidate session-bound tokens upon user session termination.
This vulnerability exists when token binding validation is enabled. As a result, a malicious actor possessing a valid session-bound token could exploit this condition to maintain unauthorized access to applications and resources even after the associated user session has ended, potentially leading to the exposure of sensitive user data. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/boot: Disable trapping of PMZR_EL0 writes to EL2
__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.
Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits. |
| Improper validation of the Destination Connection ID length in s2n-quic 1.88.0 and earlier may allow an unauthenticated remote user to cause a denial of service by shutting down a server endpoint via a single crafted UDP datagram. Only server endpoints specifically configured to send Retry packets are affected.
To remediate this issue, users should upgrade to version v1.89.0 or later. |
| IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 does not invalidate session after a logout which could allow an authenticated user to impersonate another user on the system. |
| Nginx UI is a web user interface for the Nginx web server. From 2.0.0 until 2.5.0, internal/backup/restore.go extracts inner archives before applying the restore_nginx and restore_nginx_ui flags and permits symlinks targeting the live Nginx configuration path. An authenticated user who can create and restore backups can craft a valid backup that places a symlink in the staging tree and then writes a regular file through that link, even when both restore flags are false. This can persistently inject configuration or cause denial of service when the modified files are later consumed. This issue is fixed in version 2.5.0. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix spurious warning for benign stage 2 teardown race
kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an
L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB
of RAM, all of which was then exited.
Under memory pressure in the L0 host warnings were observed due to
migration triggered by compaction:
WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80,
CPU#5: kcompactd0/66
Which was, in turn, triggered by an MMU notifier for the host invalidation:
mmu_notifier_invalidate_range_start()
-> ... -> kvm_mmu_notifier_invalidate_range_start()
-> kvm_mmu_unmap_gfn_range()
-> kvm_unmap_gfn_range()
-> kvm_nested_s2_unmap()
-> kvm_stage2_unmap_range()
-> __unmap_stage2_range()
-> stage2_apply_range()
<- -EINVAL, triggering a WARN_ON()
Racing with L0's teardown of stage 2 page tables:
exit_mm()
-> mmput()
-> __mmput()
-> exit_mmap()
-> mmu_notifier_release()
-> ... -> kvm_mmu_notifier_release()
-> kvm_flush_shadow_all()
-> kvm_arch_flush_shadow_all()
-> kvm_free_stage2_pgd()
-> [ acquire kvm->mmu_lock for write ]
-> mmu->pgt = NULL [ among other tasks ]
-> [ release kvm->mmu_lock for write ]
It turns out there is a benign race resulting in a spurious warning:
Thread A - notify: migration | Thread B - notify: release
-------------------------------|---------------------------------
< kvm->mmu_lock held > |
stage2_apply_range() |
get mmu->pgt, check !NULL |
... | kvm_arch_flush_shadow_all()
cond_resched_rwlock_write(); | < contend, sleep kvm->mmu_lock >
< drop kvm->mmu_lock > | < acquire kvm->mmu_lock>
| ...
| kvm_free_stage2_pgd()
| mmu->pgt = NULL
| < invalidate MMU >
| ...
| < release kvm->mmu_lock >
[ scheduled ] |
stage2_apply_range() |
< loop to next > |
get, mmu->pgt, check !NULL |
is NULL, return -EINVAL |
__unmap_stage2_range() |
WARN_ON(-EINVAL) <--- entirely spurious - the race was handled
correctly.
Fix the spurious warning by updating stage2_apply_range() to no longer
treat concurrent PGT teardown on lock release as an error - whether the
walker is tearing down page tables or doing something else this is a
legitimate reason to abort the operation without error.
This keeps the warning in place for all other circumstances.
In practice only __unmap_stage2_range() actually does anything with the
error so this only impacts that. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: preserve tc_skb_cb across defragmentation
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments(). |
