| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: loongson - Remove broken and unused loongson-rng
The loongson-rng rng_alg has several vulnerabilities, including not
providing forward security, and a use-after-free bug due to the use of
wait_for_completion_interruptible().
Meanwhile, the rng_alg framework doesn't really have any purpose in the
first place other than to access the software algorithms crypto/drbg.c
and crypto/jitterentropy.c. Hardware-specific rng_algs have no
in-kernel user, and unlike hwrng there's no feed into the actual Linux
RNG. As such, there's really no point to this code. There are of
course other rng_alg drivers that are similarly unused, but they're
similarly in the process of being phased out, e.g.
https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and
https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org
Given that, there's no point in fixing forward these vulnerabilities,
and it makes much more sense to simply roll back the addition of this
driver. If this platform provides TRNG (not PRNG) functionality, it
could make sense to add a hwrng driver, but it would be quite different. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - use print_hex_dump_devel to guard key hex dumps
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG
is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
partitions: aix: bound the pp_count scan to the ppe array
aix_partition() reads the physical volume descriptor into a fixed-size
struct pvd and then scans its physical-partition-extent array:
int numpps = be16_to_cpu(pvd->pp_count);
...
for (i = 0; i < numpps; i += 1) {
struct ppe *p = pvd->ppe + i;
...
lp_ix = be16_to_cpu(p->lp_ix);
pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a
fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the
on-disk pp_count. pp_count is an unvalidated __be16 read straight from
the descriptor, so a crafted AIX image with pp_count larger than 1016
drives the loop to read pvd->ppe[i] past the end of the allocation (up
to 65535 entries, ~2 MB out of bounds).
The partition scan runs without mounting anything, when a block device
with a crafted AIX/IBM partition table appears (an attacker-supplied
image attached with losetup -P, or a device auto-scanned by udev), via
msdos_partition() -> aix_partition().
Clamp the scan to the number of entries the ppe[] array can hold. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()
supplicant_ie is a 256-byte array in struct security_priv. The WPA and
WPA2 IE copy paths use:
memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2);
where wpa_ielen is the raw IE length field (u8, 0-255). When a local user
supplies a connect request via nl80211 with a crafted WPA IE of length 255,
wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into
the adjacent last_mic_err_time field.
rtw_parse_wpa_ie() does not prevent this: its length consistency check
compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255
when wpa_ie_len = 257, so the check passes silently.
Add explicit bounds checks for both the WPA and WPA2 paths before the
memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the
supplicant_ie buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix double-free and use-after-free in error paths
In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and
then passed to ipu7_bus_initialize_device(), which stores it in
adev->pdata. The ipu7_bus_release() function frees adev->pdata when the
device's reference count drops to zero.
Two error paths incorrectly call kfree(pdata) after the device teardown
has already freed it:
1. When ipu7_mmu_init() fails: put_device() is called, which drops the
reference count to zero and triggers ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is a double-free.
2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit()
internally, which calls put_device() -> ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is again a double-free.
Note that the kfree(pdata) when ipu7_bus_initialize_device() itself
fails is correct, because in that case auxiliary_device_init() failed
and the release function was never set up, so pdata must be freed
manually.
Additionally, the error code was not saved before calling put_device(),
causing ERR_CAST() to dereference the already-freed adev pointer when
constructing the return value. Fix this by saving the error from
dev_err_probe() before put_device() and returning ERR_PTR() instead.
Remove the redundant kfree(pdata) calls and fix the use-after-free in
the return values of the two affected error paths. |
| OS command injection vulnerability in Jenkins TICS Plugin 2025.1.1 and earlier allows attackers able to control build environment variable values to execute arbitrary commands on the agent running the build. |
| TOON is a compact, human-readable serialization of JSON data for LLM prompts. Prior to 2.3.1, decoding attacker-controlled TOON with a __proto__, constructor, or prototype key wrote through the object prototype chain instead of creating an own property, polluting Object.prototype for the runtime. In packages/toon/src/decode/expand.ts, the expandPaths: 'safe' path and insertPathSafe function made dotted keys such as a.__proto__.x the strongest vector, while plain nested objects, tabular rows, quoted keys, and streaming decode were also affected. The encoder also dropped own __proto__ properties and could invoke an inherited setter during normalization. Services that decode untrusted TOON could experience denial of service or, when a suitable downstream gadget is present, remote code execution. This issue is fixed in version 2.3.1. |
| DSpace open source software is a repository application which provides durable access to digital resources. From versions 8.0-rc1 to before 8.4, versions 9.0-rc1 to before 9.3, and version 10-rc1, Remote Code Execution (RCE) is possible via Velocity Templates used by DSpace for COAR Notify/LDN messages. This issue has been patched in versions 8.4, 9.3, and 10.0. |
| HTTPX2 is a next generation HTTP client for Python. Prior to 2.12.0, the HTTPX2 content decoders in src/httpx2/httpx2/_decoders.py fully inflate each gzip, deflate, br, or zstd network chunk before iter_bytes() or aiter_bytes() yields bounded pieces to the application. A 64 KiB compressed chunk can expand to approximately 64 MiB in one intermediate allocation, so an attacker-controlled or compromised server can cause severe memory pressure or out-of-memory process termination even when the application streams the response. This issue is fixed in version 2.12.0. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vme_user: bound slave read/write to the kern_buf size
The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy
'count' bytes into/out of the fixed-size kern_buf (size_buf ==
PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without
bounding *ppos + count against size_buf.
vme_user_write()/vme_user_read() only clamp count to the VME window size
(image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the
user-supplied slave.size -- validated against the VME address space (up
to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window
exceeds 128 KiB, a write()/read() copies past the kern_buf allocation.
Clamp count against size_buf in both helpers, with an early return when
*ppos is already at/after the buffer end. *ppos is >= 0 here (the caller
rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors
the existing clamp in the MASTER-path helpers resource_to_user() /
resource_from_user(), and matches the read()/write() convention of a
short transfer at end-of-buffer.
Found by static analysis (CodeQL taint tracking + CBMC bounded model
checking) and confirmed dynamically under KASAN with the vme_fake bridge:
BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80
Write of size 262144 at addr ffff888004100000 by task trigger/68
_copy_from_user+0x2d/0x80
vme_user_write+0x13e/0x240 [vme_user]
vfs_write+0x1b8/0x7a0
ksys_write+0xb8/0x150 |
| HDD password plaintext is stored in a UEFI variable. |
| Use of Weak Credentials vulnerability in B&R Industrial Automation GmbH mapp Audit used in mapp Services.
This issue affects mapp Audit used in mapp Services: before 6.8.0. |
| Integer overflow or wraparound in .NET allows an unauthorized attacker to elevate privileges locally. |
| Kill Bill through 0.24.21 fails to enforce permission annotations on several AdminResource endpoints including getQueueEntries, invalidatesCache, and putOutOfRotation. Authenticated users with minimal account:read permissions can read internal queues, flush server caches, and disable the server by putting the host out of rotation. |
| vhr fails to validate user authorization in the PUT /hr/info endpoint, allowing authenticated users to modify arbitrary HR profiles by supplying any profile ID in the request body. Attackers can overwrite other users' names, addresses, and disable accounts including administrators to cause denial of service. |
| A vulnerability in Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 that are running Cisco Session Initiation Protocol (SIP) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper memory management when an affected device processes HTTP packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted HTTP packets to the device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, resulting in a DoS condition. A manual reboot of the device is required to recover from this condition.
Note: For this vulnerability to be exploitable, the phone must be registered to Cisco Unified Communications Manager (Unified CM) and have Web Access enabled. Web Access is disabled by default. |
| Open edX Platform enables the authoring and delivery of online learning at any scale. Prior to commit 59bb6d6, the view function set_course_mode_price() at lms/djangoapps/instructor/views/instructor_dashboard.py:430 is decorated only with @login_required and performs no course-level permission check. Any authenticated user — including a learner account with zero course roles — can issue a single POST request to overwrite the honor mode price and currency of any course on the platform. The companion frontend modal was removed in a prior cleanup, but the URL route and view remain live, making this an unguarded orphan endpoint. This issue has been patched via commit 59bb6d6. |
| util-linux versions through 2.41.5 and 2.42.2 fail to check mount helper exit status before running post-mount hooks, allowing unprivileged users to execute privileged operations on pre-existing filesystems. Attackers can exploit X-mount.idmap or X-mount.owner hooks to clone filesystems with inherited suid bits or modify target inode permissions after a helper fails, achieving privilege escalation. |
| A vulnerability was identified in Tenda HG10 300001138. Impacted is the function formWlanSetup of the file /boaform/formWlanSetup of the component Boa Web Server. The manipulation of the argument ssid leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. |
| Privilege escalation in Firefox for Android. This vulnerability was fixed in Firefox 155. |
