Export limit exceeded: 418065 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26188 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46300 | 3 Linux, Redhat, Siemens | 10 Kernel, Linux Kernel, Enterprise Linux and 7 more | 2026-10-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker during coalescing skb_try_coalesce() can attach paged frags from @from to @to. If @from has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same externally-owned or page-cache-backed frags, but the shared-frag marker is currently lost. That breaks the invariant relied on by later in-place writers. In particular, ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP receive coalescing has moved shared frags into an unmarked skb, ESP can see skb_has_shared_frag() as false and decrypt in place over page-cache backed frags. Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged frags. The tailroom copy path does not need the marker because it copies bytes into @to's linear data rather than transferring frag descriptors. | ||||
| CVE-2026-99101 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: move attribute payload before shrinking its record ntfs_new_attr_flags() resizes the non-resident attribute record before moving its name and mapping pairs to their shorter-header offsets when compression or sparse state is cleared. Shrinking the record first moves the following attribute over the tail of the old record. The subsequent memmove() therefore copies bytes from that following attribute instead of the old mapping pairs. Re-enabling compression on an empty file persists those bytes as a malformed mapping pairs array, which ntfsck reports as a missing or invalid run length. Move the payload before shrinking the record, while retaining the existing resize-before-move ordering when growing it. | ||||
| CVE-2026-99104 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor scx_bypass() claims bypass dispatch when the scheduler's depth goes from zero to one and releases it when the depth returns to zero, but propagates only the depth to the descendants, not the claim. A descendant that starts bypassing with its ancestor never claims, and one whose own bypass ends under the ancestor's keeps its claim, as its depth does not return to zero. A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that starts under a PM suspend has no claim, so once the resume lifts the root's bypass its tasks sit on the parent's bypass DSQs with nobody consuming them. Claim for every descendant whose depth goes from zero to one in the propagation and release every scheduler in the subtree whose depth returned to zero once the tasks have moved out of the bypass DSQs. A parent that is bypassing itself when a descendant claims consumes only its own bypass DSQs, empty until it leaves bypass and becomes the host. | ||||
| CVE-2026-99172 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: ipc: drop the mqueue mount with kern_unmount() on setup failure mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its ->mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain mntput(). With ->mnt_ns set that takes the fast path of mntput_no_expire(). The count drops to zero and nothing ever kills the mount, so the mount and the mqueue superblock are leaked. Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace") added the first failure path after mq_init_ns() and never dropped the mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on sysctl setup failure") tried to fix that with a mntput() but that doesn't help for a long-term mount. Use kern_unmount(). free_ipc() open-codes the same thing for a namespace that made it. | ||||
| CVE-2026-99199 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: hip04_eth: Move setting of netops to fix crash hip04_mac_probe() calls of_phy_connect() before ndev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash"). | ||||
| CVE-2026-99207 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Disable interrupts while holding delayed_cmd_lock target_do_delayed_work() takes dev->delayed_cmd_lock with a plain spin_lock(). It runs from system_percpu_wq, so interrupts stay enabled while the lock is held. Every other acquisition of that lock uses spin_lock_irqsave(): target_handle_task_attr() and transport_complete_ordered_sync() in target_core_transport.c, and target_non_ordered_release() in target_core_device.c. That was safe while every caller of transport_complete_task_attr() ran in process context: target_complete_ok_work() from target_completion_wq, transport_complete_qf() from dev->qf_work_queue, and transport_generic_request_failure() from the submit and execute paths. Since commit 06933066d88a ("scsi: target: Add support for completing commands from backend context") that is no longer true. With complete_type=1 on a fabric that sets direct_compl_supp, target_complete() runs target_complete_ok_work() inline in the backend's completion context, which target_complete_cmd_with_sense() documents as "May be called from interrupt context". For iblock that is the bio end_io. target_complete_ok_work() starts with transport_complete_task_attr(), which takes delayed_cmd_lock in two ways: - Every ORDERED command is put on dev->delayed_cmd_list by target_handle_task_attr() and dispatched from there by target_do_delayed_work(), which marks it SCF_TASK_ORDERED_SYNC. Its completion therefore goes through transport_complete_ordered_sync(). - A SIMPLE command that completes while an ORDERED command is pending drops the last reference to the killed dev->non_ordered, and percpu_ref_put() then runs target_non_ordered_release() in the completing context. Both take the lock and, if commands are waiting, call schedule_work(&dev->delayed_cmd_work), which queues on system_percpu_wq, i.e. on the CPU that took the completion. Further completions for the same queue are typically delivered there too, so one arriving while the work holds the lock spins on it forever. Reaching this needs complete_type=1, which is not the default (vhost-scsi, the only fabric with direct_compl_supp, defaults to TARGET_QUEUE_COMPL), a backend whose I/O completes from interrupt context, and ORDERED commands from the initiator. Linux virtio_scsi guests send only VIRTIO_SCSI_S_SIMPLE and never take the ordered path; any guest that uses the ORDERED task attribute, which vhost-scsi accepts, does. target_do_delayed_work() is a work item and always runs in process context, so spin_lock_irq() is sufficient. Found by inspection; no runtime report. A single ORDERED command goes through both acquisitions, so with CONFIG_PROVE_LOCKING the first one completed through direct completion should produce an inconsistent lock state report on delayed_cmd_lock (hardirq or softirq, depending on where the backend completes). | ||||
| CVE-2026-99208 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Zero OA buffer at allocation ttm_bo_type_kernel BOs are not guaranteed to be zeroed on allocation and may contain data from previously freed pages. Since the OA buffer is mmap'able by userspace, this can expose stale kernel memory contents. Streams opened with DRM_XE_OA_PROPERTY_OA_DISABLED allocate the OA buffer without calling xe_oa_init_oa_buffer(). Zero the buffer at allocation to prevent information disclosure through mmap. The existing zeroing in xe_oa_init_oa_buffer() remains necessary for zero report-id/timestamp detection on enable/re-enable. (cherry picked from commit 126c4c5388f9311a390b9b254a835b0cf0f55331) | ||||
| CVE-2026-99210 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: clear rdev on device init failure rocket_probe() stores the return value from rocket_device_init() in the file-scoped rdev pointer before checking whether it is an error pointer. If rocket_device_init() fails, rdev is left as an ERR_PTR. The rdev pointer is also used as the marker for whether the shared rocket device has already been initialized. A later core probe can therefore see a non-NULL rdev, skip rocket_device_init(), and dereference the error pointer when reading rdev->num_cores. Save the error code and clear rdev before returning from the rocket_device_init() failure path. | ||||
| CVE-2026-99108 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix FITRIM range alignment ntfs_trim_fs() aligns the start of a free extent up to the device discard granularity, but derives the discard length by aligning the original extent length down. When the free extent start is not discard-aligned, adding that length to the aligned start can extend the discard past the free extent and into allocated clusters. For example, with 4 KiB clusters and 32 KiB discard granularity, the free extent [4 KiB, 36 KiB) becomes the discard range [32 KiB, 64 KiB), so 28 KiB beyond the free extent may be discarded. Align the absolute end of the free extent down and derive the length from the two aligned endpoints. Skip extents that contain no full discard unit. Reproduced with a 4 KiB-cluster NTFS filesystem on scsi_debug configured for 32 KiB discard granularity and read-zero-after-trim. Before this change, FITRIM zeroed seven allocated 4 KiB clusters following an unaligned 32 KiB hole. With this change, the same data remains intact across FITRIM and remount. | ||||
| CVE-2026-99109 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that do not fit the request buffer CIFSSMBSetEA() copies the caller's extended attribute value into the SMB request buffer without checking that it fits. The requirement is stated in the source but was never implemented: /*BB add length check to see if it would fit in negotiated SMB buffer size BB */ /* if (ea_value_len > buffer_size - 512 (enough for header)) */ if (ea_value_len) memcpy(parm_data->list.name + name_len + 1, ea_value, ea_value_len); The only bound applied on the way in is in cifs_xattr_set(): #define MAX_EA_VALUE_SIZE CIFSMaxBufSize ... if (size > MAX_EA_VALUE_SIZE) CIFSMaxBufSize is the full payload capacity of the buffer, so a value of exactly that size leaves no room for the SMB header, the TRANS2 parameter block, the fealist header and the EA name that are written ahead of it in the same object. SendReceive() already enforces the correct limit on this very length: if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) but it is called after the copy has taken place. An unprivileged setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte value writes 16384 bytes starting 345 bytes into a 16588-byte cifs_request object, ending 141 bytes past it: BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0 Write of size 16384 at addr ffff888003aa0159 by task init/68 __asan_memcpy+0x3c/0x60 CIFSSMBSetEA+0xabc/0xde0 cifs_xattr_set+0xd3a/0xff0 __vfs_setxattr+0x13e/0x1a0 The buggy address is located 345 bytes inside of allocated 16588-byte region Apply SendReceive()'s limit to the assembled request before the copy rather than after it, and widen the byte counters so the sum cannot wrap before it is tested. byte_count is also tested against U16_MAX, because it is stored in the 16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is raised at module load, where it may be set as high as 1024*127: with a 5-byte EA name and a 65521-byte value, count is exactly U16_MAX while byte_count is 65556, and cpu_to_le16() would truncate it to 20 and transmit a frame whose ByteCount does not match its length. Testing byte_count covers count as well, since byte_count is the larger of the two and count's only 16-bit consumer is written after this point. check_add_overflow() is evaluated first so that total_len is assigned before it is reported. | ||||
| CVE-2026-99111 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix data corruption with concurrent writes and O_TRUNC cifs_do_truncate() flushes dirty pages with filemap_write_and_wait() and truncates the file on the server, but in the old code both operations ran without holding i_rwsem or invalidate_lock. A concurrent buffered write via netfs_perform_write() -- which only needs i_rwsem shared -- could dirty new pages after the flush but before the local truncation, and those pages would be silently discarded by cifs_setsize() -> truncate_pagecache(). Fix by acquiring inode_lock (exclusive i_rwsem) and filemap_invalidate_lock at the top of cifs_do_truncate(), so the entire flush-truncate-resize sequence is atomic with respect to: - buffered writes (blocked by exclusive i_rwsem, since netfs_start_io_write takes i_rwsem shared), - read page faults (blocked by exclusive invalidate_lock, since filemap_fault takes it shared), - writeback collection (blocked by netfs_wb_begin/netfs_wb_end around the server truncate and local resize, since netfs_writepages also acquires the wb lock). | ||||
| CVE-2026-99016 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: futex: untag the user pointer before the atomic access access_ok() checks untagged_addr(uaddr), but arch_futex_atomic_op_inuser() and futex_atomic_cmpxchg_inatomic() hand the raw uaddr to the inline asm amoswap/amoadd/.../lr.w+sc.w through the "+m" (*uaddr) operand. When the tagged address ABI is enabled (CONFIG_RISCV_ISA_SUPM, prctl PR_SET_TAGGED_ADDR_CTRL with PMLEN != 0), those two addresses differ: a user pointer whose top PMLEN bits hold a tag passes access_ok() after untagging, but the atomic is then performed on the still-tagged raw address. Supervisor-mode data accesses are not subject to the U-mode pointer masking (that is governed by menvcfg.PMM, which the kernel does not set), so hardware does not strip the tag for the kernel's own access. With Sv57 and PMLEN=16 the tag bits overlap the canonical-address bits, so a tagged pointer can name a canonical kernel virtual address (e.g. in the linear map) whose untagged form is a valid user address. An unprivileged process can thus make FUTEX_WAKE_OP perform an atomic read-modify-write on an arbitrary kernel address, with the matching FUTEX_OP_CMP_* result serving as a read oracle. get_user()/put_user()/raw_copy_{to,from}_user() already untag the pointer after the access_ok() check; do the same in the futex helpers so the atomic operates on the address that was actually validated. | ||||
| CVE-2026-99021 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: of: fill in supply names in of_regulator_bulk_get_all() of_regulator_bulk_get_all() returns an array it allocated itself, and fills in only the consumer of each entry. Every other way of getting a bulk array has the supply name set, because the caller provides it, and the core expects it to be there: regulator_bulk_enable() prints it when a supply fails to enable, so a caller that hands such an array to it dereferences uninitialised memory on that path. Copy each name into the array's own allocation, right behind the entries, so that it shares the array's lifetime and callers still have nothing extra to free. That also retires the fixed 64 byte stack buffer the names were assembled in, which is_supply_name() never bounded the copy against. | ||||
| CVE-2026-99023 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: power: sequencing: pcie-m2: Fix leaking array from of_regulator_bulk_get_all() of_regulator_bulk_get_all() allocates the consumers array and hands it to the caller, who is expected to free it at an appropriate time. pwrseq-pcie-m2.c never did, leading to a memory leak. Add an explicit kfree() for the consumers array. | ||||
| CVE-2026-99026 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: team: free skb when broadcast has no txable port bc_transmit() sends the original skb through the last txable port. When no port is txable, it returns false without consuming the skb, but team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the skb and its socket write-memory charge. A TX-enabled, link-down port keeps the broadcast transmit op installed. Carrier can stay up through a second link-up, TX-disabled port or be forced on by userspace. Free the original skb on the no-port path while leaving the existing drop accounting intact. Discovered by Sashiko during review of previous commit. | ||||
| CVE-2026-99030 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits() When skb_copy_and_csum_bits() reaches unreadable frags it returns 0 after copying only the linear part, and the rest of the caller's buffer is left as it was. The callers copy into a buffer that is about to go out on the wire: an ICMP error quoting the offending packet, or a driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer is zeroed beforehand, so whatever was in memory there gets sent. Zero the part of the buffer we didn't fill. The checksum usually won't match the data any more, so the receiver will usually drop the packet, but either way it no longer carries anything it shouldn't. Only zero for a positive @len, a negative one from a broken caller must not turn into a huge memset(). | ||||
| CVE-2026-98957 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: disable rx napi when removing device Unloading the mt7915e module with a MT7916 triggers multiples WARN in __netif_napi_del_locked() and in page_pool_disable_direct_recycling() because the driver does not disable the napi before destroying it. This is troublesome since on MT7916 it is required to unload the module and reinsert it with a different enable_6ghz parameter to change the frequency. The system generally becomes unstable after reinserting the module. Fix it by disabling rx napi inside mt7915e itself, even through napi rx is enabled in the mt76 generic code. Disabling it in the mt76 generic code was previously attempted and reverted because napi was disabled too late and rx handlers could access freed structures. Note that the tx side is enabled and disabled by the mt76 generic code. It is disabled in mt7915_stop_hardware() since, unlike mt7915_unregister_device(), is it also called in the probe path if an error happens after rx napi is enabled. | ||||
| CVE-2026-98958 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: account non-AQL frames per peer rather than per link The driver increments wcid->non_aql_packets when a frame goes to the hardware queue. The completion path decrements the counter again. For an MLO peer, the hardware reports the completion on the link that it used for the transmission. This link can differ from the link that the driver queued the frame on. In that case, the increment and the decrement go to different link wcids, and the count drifts upwards until it blocks the station. Keep the count on the wcid of the primary link, like the other peer-wide state. | ||||
| CVE-2026-98960 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't stash io_uring encoded data across -EAGAIN Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU leaks if the request is cancelled or the ring exits before reissue. io_uring does not free driver PDU allocations on cleanup. Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so return -EAGAIN before allocating and free data on every exit. Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation for btrfs_uring_read_finished(). | ||||
| CVE-2026-98923 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: io: Reject non-user protection in ioremap_prot() Mapping a stack-top page via /dev/mem with PROT_NONE and then reading that process's /proc/<pid>/cmdline triggers a spurious WARN in ioremap_prot() through generic_access_phys(): WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys Call trace: generic_access_phys+0x1c8/0x228 (P) __access_remote_vm+0x2b4/0x398 access_remote_vm+0x14/0x30 get_mm_cmdline+0xf8/0x2a0 proc_pid_cmdline_read+0x68/0x120 generic_access_phys() passes the protection derived from the user PTE to ioremap_prot(). On arm64, a PROT_NONE mapping is represented by a present-invalid PTE, so pte_present() still returns true and the protection reaches ioremap_prot(). A PROT_NONE mapping does not have PTE_USER, causing the existing WARN_ON_ONCE() in ioremap_prot() to fire even though this is a valid user mapping. Execute-only mappings have the same issue and must not be readable through this path either. ioremap_prot() should therefore reject protection values without PTE_USER without warning. This makes the access fail cleanly for PROT_NONE and execute-only mappings while retaining the existing user-protection contract. | ||||