| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Stop work before releasing hwmon device
Sashiko reports:
In lm90_probe(), the devm action to cancel the alert_work and report_work
(lm90_restore_conf) is registered in lm90_init_client() before
devm_hwmon_device_register_with_info() is called.
Because devm executes cleanup actions in reverse order during module
unbind or probe failure, the hwmon device is unregistered and freed first.
If lm90_alert_work() or lm90_report_alarms() runs in the window between
the hwmon device being freed and the delayed works being cancelled,
lm90_update_alarms() will dereference the freed data->hwmon_dev here.
Fix the problem by canceling the workers separately after registering
the hwmon device and before registering the interrupt handler. This ensures
that the workers are canceled after interrupts are disabled and before
the hwmon device is released. Add "shutdown" flag to indicate that device
shutdown is in progress to prevent workers from being re-armed. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: pop cached request if it is usable
When submitting a bio to blk-mq, if the task should sleep after peeking
a cached request, but before it pops it, the plug flushes and calls
blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a
use-after-free bug. Fix this by popping the cached request before any
possible blocking calls if it is suitable for use.
Popping this request first holds a queue reference, so avoid any
serialization races with queue freezes and can safely proceed with
dispatching that request to the driver. This potentially increases a
timing window from when a driver wants to freeze its queue to when
requests stop being dispatched. That scenario is off the fast path
though, and drivers need to appropriately handle requests during a
freeze request anyway.
The downside is the popped element needs to be individually freed when
we performed a bio plug merge. The cached request would have had to be
freed later anyway, but this patch does it inline with building the plug
list instead of after flushing it. |
| In the Linux kernel, the following vulnerability has been resolved:
security/keys: fix missed RCU read section on lookup
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: fix use-after-free in store_modes()
store_modes() replaces a framebuffer's modelist with modes from userspace.
On success it frees the old modelist with fb_destroy_modelist(). Two
fields still point into that freed list.
One pointer is fb_display[i].mode, the mode a console is using.
fbcon_new_modelist() moves these pointers to the new list. It only does so
for consoles still mapped to the framebuffer. An unmapped console is
skipped and keeps its stale pointer. Unbinding fbcon, for example, sets
con2fb_map[i] to -1 but leaves fb_display[i].mode set. An
FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches
fbcon_mode_deleted(). That function reads the stale fb_display[i].mode
through fb_mode_is_equal(). The read is a use-after-free.
The other pointer is fb_info->mode, the current mode. It is set through
the mode sysfs attribute. store_modes() does not update fb_info->mode, so
it is left pointing into the freed list. show_mode(), the attribute's read
handler, dereferences the stale fb_info->mode through mode_string(). The
read is a use-after-free.
Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon:
Set fb_display[i]->mode to NULL when the mode is released") added the
helper fbcon_delete_modelist(). It clears every fb_display[i].mode that
points into a given list. So far it is called only from the unregister
path. Call it from store_modes() too, and set fb_info->mode to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omap2: fix use-after-free in omapfb_mmap
omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that
can lead to use-after-free:
The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock),
while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock.
This allows concurrent execution.
In omapfb_mmap():
1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref
2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region
3. len = fix->smem_len; // Read from NEW region
4. vm_iomap_memory(vma, start, len); // Map NEW region memory
5. atomic_inc(&rg->map_count); // Increment OLD region!
Concurrently, OMAPFB_SETUP_PLANE can:
- Reassign ofbi->region = new_rg
- Update fix->smem_len
- OMAPFB_SETUP_MEM then checks NEW region's map_count (0!) and frees it
This leaves userspace with a mapping to freed physical memory.
The fix is to read all required values (start, len) from the same
region reference (rg) that will have its map_count incremented,
preventing the region from being freed while still mapped. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free on cdev close
This addresses a use-after-free bug when a raw bundle is disconnected
but its chardev is still opened by an application. When the application
releases the cdev, it causes the following panic when init on free is
enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130
...
Call Trace:
<TASK>
cdev_put+0x18/0x30
__fput+0x255/0x2a0
__x64_sys_close+0x3d/0x80
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The cdev is contained in the "gb_raw" structure, which is freed in the
disconnect operation. When the cdev is released at a later time,
cdev_put gets an address that points to freed memory.
To fix this use-after-free, convert the struct device from a pointer to
being embedded, that makes the lifetime of the cdev and of this device
the same. Then, use cdev_device_add, which guarantees that the device
won't be released until all references to the cdev have been released.
Finally, delegate the freeing of the structure to the device release
function, instead of freeing immediately in the disconnect callback. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free if write is called after disconnect
If a user writes to the chardev after disconnect has been called, the
kernel panics with the following trace (with
CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
BUG: kernel NULL pointer dereference, address: 0000000000000218
...
Call Trace:
<TASK>
gb_operation_create_common+0x61/0x180
gb_operation_create_flags+0x28/0xa0
gb_operation_sync_timeout+0x6f/0x100
raw_write+0x7b/0xc7 [gb_raw]
vfs_write+0xcf/0x420
? task_mm_cid_work+0x136/0x220
ksys_write+0x63/0xe0
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Disconnect calls gb_connection_destroy, which ends up freeing the
connection object. When gb_operation_sync is called in the write file
operations, its gets a freed connection as parameter and the kernel
panics.
The gb_connection_destroy cannot be moved out of the disconnect
function, as the Greybus subsystem expect all connections belonging to a
bundle to be destroyed when disconnect returns.
To prevent this bug, use a rw lock to synchronize access between write
and disconnect. This guarantees that the write function doesn't try
to use a disconnected connection. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix use-after-free on registration failure
Make sure to disable and free the interrupts in case controller
registration fails to avoid a potential use-after-free and resource
leak.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: remove xfs_attr_leaf_hasname
The calling convention of xfs_attr_leaf_hasname() is problematic, because
it returns a NULL buffer when xfs_attr3_leaf_read fails, a valid buffer
when xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and a
non-NULL buffer pointer for an already released buffer when
xfs_attr3_leaf_lookup_int fails with other error values.
Fix this by simply open coding xfs_attr_leaf_hasname in the callers, so
that the buffer release code is done by each caller of
xfs_attr3_leaf_read. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
Presently, if the force feedback initialisation fails when probing the
Logitech G920 Driving Force Racing Wheel for Xbox One, an error number
will be returned and propagated before the userspace infrastructure
(sysfs and /dev/input) has been torn down. If userspace ignores the
errors and continues to use its references to these dangling entities, a
UAF will promptly follow.
We have 2 options; continue to return the error, but ensure that all of
the infrastructure is torn down accordingly or continue to treat this
condition as a warning by emitting the message but returning success.
It is thought that the original author's intention was to emit the
warning but keep the device functional, less the force feedback feature,
so let's go with that. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().
syzbot reported use-after-free of AF_UNIX socket's sk->sk_socket
in sk_psock_verdict_data_ready(). [0]
In unix_stream_sendmsg(), the peer socket's ->sk_data_ready() is
called after dropping its unix_state_lock().
Although the sender socket holds the peer's refcount, it does not
prevent the peer's sock_orphan(), and the peer's sk_socket might
be freed after one RCU grace period.
Let's fetch the peer's sk->sk_socket and sk->sk_socket->ops under
RCU in sk_psock_verdict_data_ready().
[0]:
BUG: KASAN: slab-use-after-free in sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278
Read of size 8 at addr ffff8880594da860 by task syz.4.1842/11013
CPU: 1 UID: 0 PID: 11013 Comm: syz.4.1842 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278
unix_stream_sendmsg+0x8a3/0xe80 net/unix/af_unix.c:2482
sock_sendmsg_nosec net/socket.c:721 [inline]
__sock_sendmsg net/socket.c:736 [inline]
____sys_sendmsg+0x972/0x9f0 net/socket.c:2585
___sys_sendmsg+0x2a5/0x360 net/socket.c:2639
__sys_sendmsg net/socket.c:2671 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2674
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7facf899c819
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007facf9827028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007facf8c15fa0 RCX: 00007facf899c819
RDX: 0000000000000000 RSI: 0000200000000500 RDI: 0000000000000004
RBP: 00007facf8a32c91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007facf8c16038 R14: 00007facf8c15fa0 R15: 00007ffd41b01c78
</TASK>
Allocated by task 11013:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
unpoison_slab_object mm/kasan/common.c:340 [inline]
__kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366
kasan_slab_alloc include/linux/kasan.h:253 [inline]
slab_post_alloc_hook mm/slub.c:4538 [inline]
slab_alloc_node mm/slub.c:4866 [inline]
kmem_cache_alloc_lru_noprof+0x2b8/0x640 mm/slub.c:4885
sock_alloc_inode+0x28/0xc0 net/socket.c:316
alloc_inode+0x6a/0x1b0 fs/inode.c:347
new_inode_pseudo include/linux/fs.h:3003 [inline]
sock_alloc net/socket.c:631 [inline]
__sock_create+0x12d/0x9d0 net/socket.c:1562
sock_create net/socket.c:1656 [inline]
__sys_socketpair+0x1c4/0x560 net/socket.c:1803
__do_sys_socketpair net/socket.c:1856 [inline]
__se_sys_socketpair net/socket.c:1853 [inline]
__x64_sys_socketpair+0x9b/0xb0 net/socket.c:1853
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 15:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x5c/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2685 [inline]
slab_free mm/slub.c:6165 [inline]
kmem_cache_free+0x187/0x630 mm/slub.c:6295
rcu_do_batch kernel/rcu/tree.c:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Fix kernel panic due to __initconst misuse
Fix a kernel panic when probing the driver as a module:
Unable to handle kernel paging request at virtual address
ffffd9c18eb05000
of_find_matching_node_and_match+0x5c/0x1a0
hantro_probe+0x2f4/0x7d0 [hantro_vpu]
The imx8mq_vpu_shared_resources array is referenced by variant
structures through their shared_devices field. When built as a
module, __initconst causes this data to be freed after module
init, but it's later accessed during probe, causing a page fault.
The imx8mq_vpu_shared_resources is referenced from non-init code,
so keeping __initconst or __initconst_or_module here is wrong.
Drop the __initconst annotation and let it live in the normal .rodata
section.
A bug of __initconst called from regular non-init probe code
leading to bugs during probe deferrals or during unbind-bind cycles. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release flowtable after rcu grace period on error
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks. |
| A flaw was found in GCC. When an application calls the erase_if function on a binary heap priority queue in libstdc++, the library reallocates storage but fails to update its internal entry pointer. An attacker capable of triggering this operation can exploit this use-after-free condition, leading to a Denial of Service (DoS) via an application crash or potential memory corruption. |
| Use-after-free in the XML component. This vulnerability was fixed in Firefox 159, Firefox ESR 115.44, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 159, Firefox ESR 115.44, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Use-after-free in the DOM: HTML Parser component. This vulnerability was fixed in Firefox 159, Firefox ESR 115.44, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
