| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Fix lost inode updates for IS_SYNC inodes
ext2_setsize() and ext2_xattr_set2() had a construct like:
if (IS_SYNC(inode)) {
sync_inode_metadata(inode, 1);
} else {
mark_inode_dirty(inode);
}
which leads to lost inode updates for IS_SYNC inodes because
sync_inode_metadata() does anything only if the inode is already dirty
and hence inode updates may be simply lost. Fix the problem by
unconditionally marking the inode dirty and *then* call
sync_inode_metadata(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: ssd1307fb: defer I2C transfers from damage callbacks
The fbdev damage callbacks may run from fbcon while printk has disabled
preemption. They currently update the display synchronously, which enters
the sleeping I2C transfer path from atomic context.
A complete report from an RK3566 system follows:
[ 258.129004] watchdog: watchdog0: watchdog did not stop!
[ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003
[ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2
spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem
videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2
stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio
stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables
x_tables autofs4
[ 258.129215] Preemption disabled at:
[ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340
[ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C
6.6.0-rc5-rockchip-rk356x #4
[ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT)
[ 258.129243] Call trace:
[ 258.129245] dump_backtrace+0xa0/0x128
[ 258.129252] show_stack+0x20/0x38
[ 258.129256] dump_stack_lvl+0x60/0xb0
[ 258.129265] dump_stack+0x18/0x28
[ 258.129269] __schedule_bug+0xa0/0xc8
[ 258.129274] __schedule+0x9ac/0xd30
[ 258.129279] schedule+0x60/0x100
[ 258.129282] schedule_timeout+0x194/0x338
[ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498
[ 258.129296] rk3x_i2c_xfer+0x20/0x60
[ 258.129300] __i2c_transfer+0x194/0x648
[ 258.129308] i2c_transfer+0x9c/0x130
[ 258.129313] i2c_transfer_buffer_flags+0x64/0x98
[ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb]
[ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb]
[ 258.129343] soft_cursor+0x13c/0x210
[ 258.129350] bit_cursor+0x2dc/0x550
[ 258.129354] fbcon_cursor+0xec/0x108
[ 258.129359] hide_cursor+0x44/0xc8
[ 258.129365] vt_console_print+0x398/0x3b0
[ 258.129370] console_flush_all.isra.0+0x17c/0x410
[ 258.129377] console_unlock+0x4c/0x100
[ 258.129382] vprintk_emit+0x1c8/0x340
[ 258.129386] vprintk_default+0x40/0x58
[ 258.129389] vprintk+0xb8/0xd0
[ 258.129392] _printk+0x68/0x98
[ 258.129398] watchdog_release+0x170/0x230
[ 258.129404] __fput+0xbc/0x288
[ 258.129409] __fput_sync+0x58/0x70
[ 258.129413] __arm64_sys_close+0x40/0x90
[ 258.129419] invoke_syscall+0x4c/0x118
[ 258.129426] el0_svc_common.constprop.0+0x48/0xf0
[ 258.129432] do_el0_svc+0x24/0x38
[ 258.129437] el0_svc+0x48/0x100
[ 258.129443] el0t_64_sync_handler+0xc0/0xc8
[ 258.129448] el0t_64_sync+0x190/0x198
[ 258.573087] ------------[ cut here ]------------
[ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count())
[ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871
preempt_count_sub+0x9c/0x148
[ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ip: orphan prefetched skbs before multicast forwarding
IPv4 and IPv6 input preserve an skb->sk association installed by
bpf_sk_assign() so that local delivery can use the selected socket under
RCU. Both address families can also prefetch a socket in UDP early demux.
In both paths (BPF and UDP early demux) a reference is not guaranteed to
be held on the socket.
When a multicast packet is not locally deliverable, IPv6 hands the
original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the
original skb when local delivery is not needed. Either path can put the
skb on an unresolved multicast route queue or forward it after the
receive-side RCU section ends.
After the prefetched socket is destroyed, a later skb free invokes
sock_pfree() and dereferences the stale skb->sk. Orphan the skb before
each non-local multicast forwarding path. Local delivery retains the
original skb; the existing skb_clone() calls provide multicast forwarding
with a socket-free clone. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix use-after-free in __rpc_clnt_handle_event and __rpc_clnt_remove_pipedir
Normal client creation goes through rpc_setup_pipedir(), which records
clnt->pipefs_sb, but the mount-event path in __rpc_clnt_handle_event()
calls rpc_setup_pipedir_sb() directly and never refreshes that field.
The umount path also removes the directory without clearing
clnt->pipefs_sb.
After a late pipefs mount or any remount, rpc_clnt_remove_pipedir()
compares the current superblock against a stale pipefs_sb pointer and
skips cleanup, leaving pipefs dentries whose inode private data still
points at a freed rpc_clnt, leading to a potential use-after-free during
subsequent rpc_info_open() or rpc_show_info() calls.
Fix this by properly updating clnt->pipefs_sb upon mount events and
clearing it during unmount or failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq24257: fix use-after-free on remove
The STAT-pin interrupt is devm-managed, so it stays armed until the devm
cleanup that runs after remove() returns. remove() cancels
bq->iilimit_setup_work while the threaded handler can still fire; that
handler reschedules the work and dereferences bq, so the work runs
against freed memory once devm frees bq.
Make the delayed work device-managed with devm_delayed_work_autocancel(),
registered before the interrupt request. The devm cleanup then releases
the interrupt first, so the handler can no longer reschedule the work,
and cancels the work before bq is freed. The explicit
cancel_delayed_work_sync() in remove() is no longer needed and is dropped.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: quiesce delayed work before teardown
The threaded IRQ handler can queue pwr_rdy_work,
max_charging_time_work and batt_presence_work. pwr_rdy_work and
batt_presence_work can also queue max_charging_time_work, while
batt_presence_work can requeue itself.
rt9455_remove() cancels max_charging_time_work before
batt_presence_work. The latter can therefore queue
max_charging_time_work after it has already been cancelled:
rt9455_remove() workqueue
cancel pwr_rdy_work
cancel max_charging_time_work
batt_presence_work queues
max_charging_time_work
cancel batt_presence_work
return
devres frees rt9455_info
max_charging_time_work dereferences
rt9455_info
The IRQ also remains registered until devres cleanup and can queue more
work after any of the cancellation calls. If rt9455_hw_init() fails
after the IRQ has been requested, probe returns without cancelling work
that may already have been queued. A pending callback can then access
rt9455_info after it has been freed.
Register rt9455_cancel_all_delayed_works() through
devm_add_action_or_reset() right after devm_power_supply_register().
devres invokes the action in reverse registration order, after the
managed IRQ has been freed and before rt9455_info is released, so the
delayed works are drained in both rt9455_remove() and the probe error
path. Cancel pwr_rdy_work and batt_presence_work before
max_charging_time_work because both can queue the latter.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/msm: Unwind probe state on registration failure
msm_iommu_probe() adds its devm-managed IOMMU object to
qcom_iommu_devices before adding the IOMMU sysfs device and registering
it with the IOMMU core.
If iommu_device_sysfs_add() fails, probe returns with the object still on
qcom_iommu_devices. The driver core then releases the devm allocation,
leaving a dangling list entry that later list walks may dereference.
If iommu_device_register() fails, the same dangling list entry remains
and the sysfs device is left registered as well.
Unwind the sysfs device and global list entry in reverse setup order on
the corresponding failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: cancel card-detect work on remove
Disabling the device interrupt and freeing the IRQ prevents new card-detect
work from being queued, but carddet_work already queued by the handler can
still run after via_sd_remove() returns. via_sdc_card_detect() recovers the
host through container_of() and dereferences its MMIO base; once remove()
returns the host can be freed, so that work would touch freed memory.
Cancel carddet_work after freeing the IRQ and before cancelling
finish_bh_work, which the card-detect handler can also queue. carddet_work
can re-enable the interrupt through via_reset_pcictrl(); mask it again
afterwards.
This issue was found by an in-house static analysis tool and confirmed by
manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop
rtl8xxxu arms rx_urb_wq from the RX completion path:
rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which
queues it on rx_urb_pending_list and, once the list grows past
RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker
rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through
container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(),
which anchors it on rx_anchor and dereferences priv->udev.
rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog,
update_beacon_work) but never cancels rx_urb_wq, so a worker armed during
the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after
rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv,
producing a use-after-free. The window opens under active RX traffic
(pending count above the watermark) followed by a disconnect.
There are two teardown races to close:
* rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock
but called schedule_work() after dropping the lock. A completion
that observed shutdown == false and released the lock could then call
schedule_work() after rtl8xxxu_stop() had set shutdown and
cancel_work_sync() had already returned, arming the worker to run
after the teardown. Move schedule_work() under the same !shutdown
branch so the arming decision is atomic with the shutdown check.
* rtl8xxxu_rx_urb_work() anchors every URB it drained back onto
rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running
when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a
URB that escaped the kill. In rtl8xxxu_stop(), call
cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is
drained first.
After priv->shutdown is set under rx_urb_lock, completions can no longer
queue rx_urb_wq. cancel_work_sync() then drains the last queued or running
worker, and the following usb_kill_anchored_urbs() kills the URBs it may
have submitted.
rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw()
guarantees .stop() runs for a live interface before ieee80211_free_hw()
frees priv. The probe error path needs no cancel: rx_urb_wq is
INIT_WORK()'d there but cannot have been scheduled, since no URB is
submitted before ieee80211_register_hw() succeeds.
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (sht3x) Fix unaligned accesses
Sashiko reports:
In sht3x_update_client(), the 16-bit temperature and humidity values are
extracted from a stack-allocated byte array using be16_to_cpup(). The
pointers passed to this function are calculated as buf and buf + 3. Since
the difference between the two pointers is an odd number of bytes, at
least one of them is guaranteed to be at an unaligned offset.
This will trigger an alignment fault on strict-alignment architectures
such as ARMv5 or SPARC, resulting in a kernel panic.
Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(),
and put_unaligned_be16() instead of cpu_to_be16(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: use conntrack GC to reap expectations
This patch replaces the timer API by GC worker approach for
expectations, as it already happened in many other subsystems.
Use the existing conntrack GC worker to iterate over the local list of
expectations in the master conntrack to reap expired expectations.
Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct
expectation which nevers sets it. Hold the expectation spinlock while
iterating over the master conntrack expectation list to synchronize with
nf_ct_remove_expectations(). This also performs runtime packet path
garbage collection through the expectation insertion and lookup
functions while walking over one of the chains of the global expectation
hashtables. Unconfirmed conntrack entries are skipped since ct->ext can
be reallocated and dying are skipped since those will be gone soon.
Set on IPS_HELPER_BIT if the helper ct extension is added, then the new
GC worker does not need to bump the ct refcount to check if the ct->ext
helper is available.
This removes the extra bump on the refcount for expectation timers, this
allows to remove several nf_ct_expect_put() calls after the unlink,
after this update only refcount remains at 1 while on the expectation
hashes.
This patch implicitly addresses a race with the existing timer API
allowing an expectation to access a stale exp->master pointer which has
been already released when expectation removal loses races with an
expiring timer, ie. timer_del() reporting false.
Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This
is needed by nf_conntrack_unexpect_related() which is called in error
paths to invalidate newly created expectations that has been added into
the hashes. These expectactions cannot be inmediately released as GC or
nf_ct_remove_expectations() could race to make it. On expectation
insert, the runtime GC reaps stale expectations before checking the
expectation limit set by policy.
Set current timestamp in nf_ct_expect_alloc(), then add the expectation
policy timeout (or custom timeout specified added on top of this) to
specify the expectation lifetime. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: Shutdown and free rx mailbox channel
A mbox rx channel is requested using mbox_request_channel_byname() in
probe. In remove callback, the rx mailbox channel is cleaned up when the
rx_chan is NULL due to incorrect condition check. The mailbox channel is
not shutdown and it can receive messages even after the device removal.
This leads to use after free. Also the channel resources are not freed.
Fix this by checking the rx_chan correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
media: atomisp: gc2235: fix UAF and memory leak
gc2235_probe() handles its error paths incorrectly.
If media_entity_pads_init() fails, gc2235_remove() is called, which
tears down the subdev and frees dev, but then still falls through to
atomisp_register_i2c_module(). This results in use-after-free.
If atomisp_register_i2c_module() fails, the media entity and control
handler are left initialized and dev is leaked.
gc2235_remove() unconditionally calls media_entity_cleanup() and
v4l2_ctrl_handler_free(), but these are not initialized at every
error path in gc2235_probe().
Replace gc2235_remove() calls in the probe error paths with explicit
unwind labels that free only the resources initialized at each point
of failure, in reverse order of initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Serialize readq reset state with q->lock
snd_seq_oss_readq_clear() resets qlen, head, and tail without
q->lock even though the normal reader and producer paths serialize the
same ring state under that spinlock. A reset can therefore race
snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave
stale records in the queue, drop freshly queued ones, or report the
wrong readiness after wakeup. KCSAN reports a data race between
snd_seq_oss_readq_clear() and snd_seq_oss_readq_free().
Take q->lock while clearing the ring and resetting input_time. Factor
the enqueue logic into a caller-locked helper so
snd_seq_oss_readq_put_timestamp() updates its suppression state under
the same lock instead of racing the reset path.
The buggy scenario involves two paths, with each column showing the
order within that path:
reset path: locked readq updater:
1. snd_seq_oss_reset() or 1. A reader or callback producer
release reaches takes q->lock on the same queue.
snd_seq_oss_readq_clear().
2. snd_seq_oss_readq_clear() 2. The updater tests or modifies
resets qlen, head, tail, qlen, head, and tail.
and input_time.
3. snd_seq_oss_readq_clear() 3. The updater completes its
wakes sleepers on read-modify-write sequence.
q->midi_sleep.
4. Without q->lock, the reset 4. The resulting ring state drives
can overlap the locked later reads and readiness.
update.
KCSAN reports:
BUG: KCSAN: data-race in snd_seq_oss_readq_clear /
snd_seq_oss_readq_free
write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0:
snd_seq_oss_readq_free+0x6c/0x80
snd_seq_oss_read+0xcb/0x250
odev_read+0x38/0x60
vfs_read+0xff/0x600
ksys_read+0xb4/0x140
__x64_sys_read+0x46/0x60
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1:
snd_seq_oss_readq_clear+0x1f/0x90
snd_seq_oss_reset+0xa7/0xf0
snd_seq_oss_ioctl+0x6f6/0x7e0
odev_ioctl+0x56/0xc0
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000001 -> 0x00000000 |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: ete: Always save state on power down
System register ETMs and ETE are unlikely to be preserved on CPU power
down. The ETE DT binding also never documented
"arm,coresight-loses-context-with-cpu" so nobody would have legitimately
been able to use that binding to fix it and ACPI has no such binding at
all.
Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg)
or ACPI boots. Use a local variable when setting up save_state so that
it's immune to concurrent probing when devices have different
configurations which is an issue with modifying the global.
This fixes the following error when using Coresight with ACPI on the FVP
which supports CPU PM:
coresight ete0: External agent took claim tag
WARNING: drivers/hwtracing/coresight/coresight-core.c:248 at coresight_disclaim_device_unlocked+0xe0/0xe8, CPU#0: perf/117 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
When function tracing or Kprobes is enabled, entering an ACPI Low
Power Idle (LPI) state triggers the following RCU splat:
RCU not on for: acpi_idle_lpi_enter+0x4/0xd8
WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228
The acpi_idle_lpi_enter() function is invoked within the cpuidle
path after RCU has already been disabled for the current local CPU.
Consequently, ftrace's function_trace_call() expects RCU to be
actively watching before recording trace data, emitting a warning
if it is not.
Fix this by annotating acpi_idle_lpi_enter(), the generic __weak
stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter()
with __cpuidle. This moves these functions into the '.cpuidle.text'
section, implicitly disabling ftrace instrumentation (notrace) along
this sensitive path and preventing trace-induced RCU warnings during
idle entry. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: at91sam9_wdt: prevent timer rearm during teardown
at91_ping() rearms the watchdog timer from its callback. timer_delete()
neither waits for a running callback nor prevents it from rearming the
timer, so probe failure or driver removal can leave the timer accessing the
devm-allocated at91wdt after it has been freed.
Use timer_shutdown_sync() on both teardown paths. It waits for a running
callback and rejects any attempt by the callback to rearm the timer. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF
Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable
freeing", v6.
Kernel page table walkers fall into two broad categories - those ranges
where no exclusion is required via walk_kernel_page_table_range_lockless()
and those where exclusion is required via walk_kernel_page_table_range()
or walk_page_range_debug().
The former category is used only by arm64 arch code operating on ranges it
both wholly owns and does not concurrently write.
The latter category consists of kernel page table walkers operating on
ranges that are wholly owned (but which need exclusion against concurrent
writers).
The lock used for exclusion is the mmap lock, and for kernel ranges this
is the mmap lock on init_mm.
ptdump is a special case being both the only user of
walk_page_range_debug(), and the only case in which it walks ranges it
does not own.
This presents a problem, as page tables may be freed under ptdump. And
indeed there is a use-after-free bug in the kernel as a result, which this
series addresses.
vmap promotes page tables to huge leaf entries where possible, freeing the
lower page table when it does. It does this with no meaningful locks held
against concurrent ptdump walks.
As a result, use-after-free can currently occur. This series addresses
the issue by having the vmap huge promotion logic acquire the mmap read
lock while both setting the huge page table entry and freeing the prior
leaf page table.
The ptdump code already acquires the mmap write lock, so by doing so we
ensure that the ptdump walker only ever observes either the huge page
table entry or the existing page table entry, and nothing is freed
underneath it.
A mitigation for this issue was already applied for arm64 in commit
fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which this series
has to deal with carefully.
This mitigation resolves the issue by acquiring the mmap read lock on
init_mm on vmap page table free if a ptdump is in progress.
However the fix in this series would cause a deadlock if we were to simply
apply it for arm64 without also reverting the change.
This is because vmap may acquire the read lock before ptdump attempts to
acquire the write lock, which then gets queued, and rwsem starvation rules
mean that the (unacknowledged) nested mmap read lock in the arm64 code
would also block, meaning the original read lock is never released and
thus deadlock.
This series works around this by #ifndef CONFIG_ARM64'ing the mmap read
lock in vmap logic, then partially reverting commit fa93b45fd397 ("arm64:
Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap
support, and removing the ifdeffery with the partial revert patch.
There are related issues that are also addressed in this series:
* x86 page attribute logic, specifically Change Page Attributes (CPA),
implements a feature whereby huge ranges can be collapsed into huge leaf
entries. This can similarly cause a UAF when done in parallel with a
ptdump walk, so similarly acquire the init_mm mmap lock to avoid this.
* The CPA logic allows concurrent page table manipulation and CPA
collapse, meaning the former risks accessing a page table the latter
frees. Fix this by acquiring mmap write lock on init_mm across the
whole CPA collapse operation and read lock on the page table
manipulation.
* x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm
walks, and in x86's case arbitrary mm's), so we ensure kernel mappings
remain stable by locking the init_mm as well as the mm being walked.
The ordering of patches is established for both strict dependencies (the
arm64 partial revert in particular has to be done after the vmap changes)
and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA
fixes are in place).
This patch (of 3):
Currently there is a nasty ra
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: hold sk properly in iso_conn_ready
sk deref in iso_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk is currently
accessed without either:
[Task 1] [Task 2]
iso_sock_release
iso_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
iso_sock_kill(sk)
UAF on sk deref
Fix possible UAF by holding sk refcount in iso_conn_ready(). Also
recheck after lock_sock that the socket is still valid. Adjust locking
so conn->sk is cleared only under lock_sock. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: fix add msg handle in send_queue ordered
In a benchmark scenario triggering a lot of requests that triggers a lot
of DLM messages on the network it can be that the mh->seq is not ordered
according the oldest seq number. This ordering is required by
dlm_receive_ack as "before(mh->seq, seq)" will stop to check for older
sequence numbers that are ordered in the tail of "node->send_queue".
The side effects of not having it correct ordered regarding
"before(mh->seq, seq)" are refcounting issues and use-after free.
I only was able to reproduce this issue in a experimental DLM branch
and a user space DLM benchmark that uses io_uring. After changing this I
don't experienced any refcounting with the sending buffer issues anymore. |
