| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: own the request before clearing ->head
io_waitid_remove_wq() only takes the wait queue lock if ->head is set.
io_waitid_wait() clears ->head first thing, before it tries to become the
owner of the request by bumping ->refs. If somebody else owns the request
at that point, nothing keeps it from completing the request while the
wake up handler is still going to touch it:
CPU0 (io_waitid_wait) CPU1 (io_waitid, holds a ref)
list_del_init(&wait->entry)
smp_store_release(&iw->head, NULL)
__do_wait() finds another child
io_waitid_remove_wq()
// ->head == NULL, no locking
io_waitid_finish(), IOU_COMPLETE
// request freed and reused
atomic_fetch_inc(&iw->refs)
The same goes for __io_waitid_cancel() if it claims the request in that
window. ->refs is part of the per opcode data of the request, so this
increments whatever the next user of the request keeps there. If that
happens to be zero, the handler concludes that it owns the request, and
queues io_waitid_cb() for it. With the window held open by a delay, and
the request reused for a receive that is waiting for data:
BUG: KASAN: slab-use-after-free in __wake_up_common+0x1ca/0x1f0
__wake_up_sync_key+0x36/0x50
sock_def_readable+0xf1/0x420
unix_stream_sendmsg+0x60b/0x1110
Allocated by task 87:
io_arm_apoll+0x1ed/0x940
Freed by task 87:
__io_submit_flush_completions+0x118d/0x1a10
tctx_task_work_run+0x327/0x950
Only clear ->head once the handler owns the request. If it doesn't, the
owner finds ->head set and has to wait for the lock, which is held by the
caller of the handler. Deleting the already deleted entry again is
harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cmd: don't leave list poison in ->hash_node
io_uring_cmd_del_cancelable() uses hlist_del() to take a command off
->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in
->hash_node. Requests are recycled through the request cache without
being reinitialised, and not every user of ->hash_node sets it up before
it is used:
If a vectored futex wait is woken while futex_wait_multiple_setup() is
still queueing the futexes, io_futexv_wait() doesn't add the request to
->futex_list, and leaves the completion to the task_work queued by the
wake up. io_futexv_complete() ends in __io_futex_complete(), whose
hlist_del_init() is fine for a request that is unhashed, which is how all
other users of the node leave it. If the request was a cancelable
uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through
LIST_POISON2:
Oops: general protection fault, probably for non-canonical address
KASAN: maybe wild-memory-access in range [0xdead000000000120-...]
RIP: 0010:io_futexv_complete+0x219/0x420
Call Trace:
tctx_task_work_run+0x804/0x950
tctx_task_work+0x71/0xa0
task_work_run+0x118/0x200
Leave the node unhashed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/wait: don't spin on a stuck overflow list
As long as IO_CHECK_CQ_OVERFLOW_BIT is set, io_cqring_wait_schedule()
returns right away, before it gets to look at signals or arms the timeout,
for io_cqring_wait() to flush the overflow list. If that doesn't empty the
list, and the CQ ring doesn't hold the number of events the caller wants,
the loop starts over, with the same result. The task spins in the kernel,
and can't be killed.
The assumption is that this can't happen: if CQEs can't be flushed, the
ring is full, and min_events is capped to the size of the ring. But:
- With IORING_SETUP_CQE_MIXED a 32b CQE needs two contiguous entries. It
is stuck on the list if a single one is free, and then the ring holds
less than cq_entries events. A single threaded application that asks
for as many events as the ring has entries never gets out of
io_uring_enter().
- Whether the ring is full is up to the CQ head, which the application
can write to. While one thread waits for events on an empty ring,
another one can move the head back so that the ring looks full and
have a CQE overflow. The waiter can't be stopped any more, not even by
SIGKILL.
Only the application can make room in the CQ ring. Return to it if the
list could not be flushed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't lose the signal that ends work
When a thread exits, only its tracked requests are cancelled. Then its
io-wq is torn down. io_wq_exit_workers() signals every worker, to get it
out of an interruptible sleep, and waits for all of them to exit. Before
they do, they go through the work that is left. Unbounded work is
cancelled. Bounded work is run, as it is expected to end by itself.
Not all of it does. An open has no file yet, so it counts as bounded, and
the open of a FIFO waits for the other end. That is what the signal is for.
But the workers are signalled once, and a worker that hasn't started the
work by then loses the signal:
io_wq_exit_workers() io_worker_handle_work()
io_wq_worker_wake()
set TIF_NOTIFY_SIGNAL
io_assign_current_work()
io_run_task_work()
clear TIF_NOTIFY_SIGNAL
io_wq_submit_work()
fifo_open()
wait_for_partner()
wait_for_completion_timeout()
The thread never gets out of do_exit():
IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC
exit of the thread that has submitted it
hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is
killed.
Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT
set. The bit is set before the workers are signalled, and it is tested
after the flag has been cleared, with clear_notify_signal() providing the
barrier. So either the flag stays, or the bit is seen.
Work that is started while the io-wq exits is treated like work that is
being run at that time: it isn't interrupted unless it waits
interruptibly. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: prevent cancel reference wrap
io_waitid packs the cancellation state into bit 31 of ->refs and uses
bits 30:0 as a 31-bit reference counter:
#define IO_WAITID_CANCEL_FLAG BIT(31)
#define IO_WAITID_REF_MASK GENMASK(30, 0)
__io_waitid_cancel() marks a request canceled, then increments the low
bits of ->refs to claim completion ownership. When another path owns the
request, the increment remains even though cancellation returns false.
The request remains discoverable by cancellation, so repeated failed
attempts can wrap the 31-bit reference field to zero. A later
cancellation can claim ownership and complete the request a second time.
Use atomic_fetch_or() when setting the cancel flag and inspect the old
flag value. The first cancel attempt continues to the existing ownership
increment, preserving its wake and issuer handoff semantics. Later
attempts see the cancel flag and return without incrementing the
reference field.
This makes repeated failed cancellation attempts idempotent while
leaving the first-cancel state transitions unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Avoid the owner account dereference in named keyring lookup
Named keyring lookup must keep the storage containing the owner UID
alive through the namespace mapping check. find_keyring_by_name()
reads keyring->user->uid under keyring_name_lock, but that lock protects
the keyring's name entry and allocation, not its separate key_user.
A named session-keyring join can overlap a privileged KEYCTL_CHOWN on
another CPU. If the keyring holds the last reference to its old dynamic
key_user and the ownership transfer succeeds, the following ordering is
possible:
Named join Chown
find_keyring_by_name() keyctl_chown_key()
read_lock(keyring_name_lock) down_write(key->sem)
load old keyring->user
replace key->user and key->uid
up_write(key->sem)
key_put(key)
key_user_put(old user): free
read old user->uid
read_unlock(keyring_name_lock)
Chown neither takes keyring_name_lock nor key_session_mutex, so it can
free the old account between the pointer load and the UID read. The
lookup then reads freed memory even though the keyring itself is alive.
Use keyring->uid for the mapping check. key_alloc() initializes this
inline owner UID and keyctl_chown_key() updates it on chown.
The existing name lock keeps its containing keyring allocated throughout
the check, so lookup no longer depends on the account's lifetime. This
also matches the owner UID used by the permission check.
KASAN report as below:
BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0
Read of size 4 at addr ffff8881128ae2ec by task keycase/500 |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Check the authorization payload in process keyring searches
An authorization payload and its saved credentials must remain valid
while search_process_keyrings_rcu() searches the requestor's keyrings.
The function validates the authorization key, then separately loads
payload.data[0] and unconditionally reads rka->cred. Validation does
not prevent request_key_auth_revoke() from clearing the payload.
A request-key helper can assume authority and fork a descendant that
inherits the authorization key. If the descendant misses in its own
keyrings, it falls back to the saved requestor credentials. Successful
target instantiation invalidates the authorization key without clearing
the payload. After the helper exits, UMH_WAIT_PROC returns to the
requester, which calls complete_request_key() and revokes that key.
With the descendant paused after validation, the paths can interleave
as follows:
1. The descendant enters search_process_keyrings_rcu() under RCU and
key_validate() succeeds.
2. The helper instantiates the target, invalidates the authorization
key, and exits.
3. The requester resumes from UMH_WAIT_PROC, calls
complete_request_key(), and revokes the authorization key.
request_key_auth_revoke() sets its payload pointer to NULL.
4. The descendant loads NULL and dereferences rka->cred.
This NULL dereference can oops the kernel. RCU delays payload disposal
but does not prevent the pointer from being cleared.
Load the payload with dereference_key_rcu() and require a non-NULL
result before validating the authorization key and searching its saved
credentials. A non-NULL payload and its credentials remain alive for
the caller's RCU read-side section; a cleared payload skips the fallback
search and follows the existing error selection.
KASAN report as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
RIP: 0010:search_process_keyrings_rcu+0x32b/0x790 |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the type name while describing a key
keyctl_describe_key() must keep the key type's name alive until
kasprintf() has consumed it. The retained key reference keeps the key
and its description alive, but does not pin the module providing its
type. The name is passed to kasprintf() without holding key->sem.
kvasprintf() uses the saved name pointer in two formatting passes, with
a GFP_KERNEL allocation between them. With AF_RXRPC=m, a task that
passes View permission before type retirement can overlap a privileged
module unload in this order:
1. KEYCTL_DESCRIBE looks up the key, saves key->type->name in the
kasprintf() arguments and completes the first formatting pass.
2. While the formatter is delayed before its second pass,
af_rxrpc_exit() calls unregister_key_type(), which removes the type
from the registry and waits for key_gc_keytype().
3. The collector takes key->sem for writing, retypes the retained key
to key_type_dead and completes retirement. Unregistration and module
exit return, allowing free_module() to release the type and name.
4. The formatter resumes its second pass and reads the saved name from
released module storage, which can fault in string().
Hold key->sem for reading across kasprintf(). The collector then cannot
retype the key or complete retirement until both formatting passes have
finished. If retirement wins the lock first, formatting uses the core
key_type_dead name instead. Release the semaphore immediately after
kasprintf(), including on allocation failure, before copying to
userspace.
Oops report as below:
BUG: unable to handle page fault for address: fffffbfff8054794
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:string+0x23f/0x470
Call Trace:
vsnprintf+0x330/0x1110 |
| In the Linux kernel, the following vulnerability has been resolved:
keys: make keyring indexes independent of kernel addresses
KEYCTL_READ returns the serial numbers in a keyring in associative-array
traversal order. The first word of the index is a public, deterministic
hash of the type pointer, domain pointer and description. An unprivileged
user can therefore insert keys with known descriptions, predict their
order for each possible KASLR slide, and recover the kernel image address.
On an x86-64 build with 16 MiB alignment, 45 user keys suffice to
distinguish the candidate slides.
Remove the addresses from the whole index, not just its first hash word.
Assign each key type and domain a nonzero 64-bit ID and hash those IDs and
the description with a once-initialized SipHash key. Use the full IDs in
the later index chunks as well. Truncating or hashing the IDs there would
lose the guarantee that distinct type/domain/description tuples have a
differing index bit.
Allocate IDs lazily since private key types need not be registered. Cache
them in the index key so tree walks and copies of an existing index do not
need to dereference a type descriptor that may have been unregistered.
Keep the 32-bit chunk layout and diff_objects() bit offsets consistent,
and retain the separate root slot for keyrings used by recursive search.
The key comparison, permissions and userspace data format are unchanged;
only the address-dependent in-memory ordering is replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the read method check against type removal
keyctl_read_key() checks key->type->read without holding key->sem.
A reference keeps the key alive, but does not pin the module containing
its type. A surviving RxRPC key can therefore be read while AF_RXRPC
is being unloaded:
KEYCTL_READ task Module unload and key GC
---------------- ------------------------
lookup_user_key()
permission / possession checks
load key->type
af_rxrpc_exit()
unregister_key_type()
GC: down_write(key->sem)
GC: retype to key_type_dead
GC: up_write(key->sem)
unregister_key_type() returns
free_module()
read saved type's read member
The final access can read freed module storage. The read invocation in
__keyctl_read_key() is already protected by key->sem, but the earlier
method check is outside that critical section.
Move the method check into __keyctl_read_key(), after key_validate() and
under its existing read hold on key->sem. The check and invocation then
use the same protected type for length queries and every read retry.
The GC cannot retype the key until the semaphore is released, and type
unregistration waits for that GC pass before the module can be freed.
Return -EOPNOTSUPP when validation succeeds and the type has no read
method. A temporary buffer may now be allocated before this result;
allocation and copying to userspace remain outside the semaphore. |
| In the Linux kernel, the following vulnerability has been resolved:
keys/trusted_keys: return immediately after TPM unseal failure
trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation
fails. If pcrlock() succeeds, its return value overwrites the unseal error,
causing key instantiation to succeed.
Return immediately when unseal fails to preserve the original error. |
| In the Linux kernel, the following vulnerability has been resolved:
asymmetric_keys: reject trust keys without IDs
The PKCS#8 parser deliberately leaves the asym_key_ids payload slot
empty. key_or_keyring_common() unconditionally dereferences that slot
when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the
plain and :chain forms reach this branch, allowing an unprivileged caller
to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING
followed by add_key().
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279)
Call Trace:
<TASK>
__key_create_or_update (security/keys/key.c:884)
key_create_or_update (security/keys/key.c:1021)
__do_sys_add_key (security/keys/keyctl.c:134)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject an asymmetric restriction key without key IDs. A PKCS#8 private
key cannot identify the signer of a candidate certificate and is not a
valid trust anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Initialize modname and offset in print_rec()
print_rec() leaves 'modname' and 'offset' uninitialized and
kallsyms_lookup() only sets them on success. When the lookup fails like
when a module is being loaded or unloaded, 'modname' holds a garbage
value, passes the 'if (modname)' check, and is dereferenced by
seq_printf().
Oops: general protection fault
RIP: 0010:string+0x48/0xe0
Call Trace:
vsnprintf+0x1f5/0x650
seq_printf+0x8e/0xb0
print_rec+0x6c/0xc0
t_show+0x4c/0x440
seq_read_iter+0x119/0x480
This can be triggered by reading available_filter_functions while a
module is being loaded or unloaded.
Initialize both variables so a failed lookup skips the module name. |
| In the Linux kernel, the following vulnerability has been resolved:
coredump: hold RCU while releasing parked threads
coredump_finish() releases the parked threads by clearing ->task in
their core_thread entry and calling wake_up_process() on each of them.
It does that without holding a reference on the task and without being
inside rcu.
But calling wake_up_process(task) without rcu here isn't safe. A parked
thread doesn't need that wakeup to leave. A spurious wakeup or a
preemption after the store is enough for the task to go away.
So if the coredump client is preempted between the store and
wake_up_process() the thread can exit and be freed in the meantime and
try_to_wake_up() takes pi_lock in freed memory.
Hold rcu across the loop. |
| A vulnerability classified as critical has been found in Cardo Systems Scala Rider Q3. Affected is the file /cardo/api of the Cardo-Updater. Unauthenticated remote code execution with root permissions is possible. Firewalling or disabling the service is recommended. |
| A vulnerability was determined in mathurvishal CloudClassroom-PHP-Project. The affected element is the function session_regenerate_id of the file loginlinkadmin.php. Executing a manipulation of the argument PHPSESSID can lead to session fixiation. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way. |
| This issue was addressed by removing the vulnerable code. This issue is fixed in Safari 27.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, visionOS 27.2. A remote attacker may be able to break out of Web Content sandbox. |
| A race condition was addressed with additional validation. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. An app may be able to access sensitive user data. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in Safari 27.2, iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, visionOS 27.2. Processing maliciously crafted web content may result in the disclosure of process memory. |
| An integer truncation vulnerability in the NAS decoder of OpenAirInterface (OAI) CN5G AMF v2.2.1 allows an unauthenticated remote attacker to cause a denial of service (DoS) via crafted NAS Registration Requests containing a malformed IMEISV in the 5GS Mobile Identity IE. The Type6NasIe::Validate() function truncates a 32-bit length value to 16 bits, bypassing length validation and causing an out-of-bounds heap read in DecodeImeisv(), which can crash the AMF process. |
