| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: restart ssc_expire_umount walk after dropping nfsd_ssc_lock
nfsd4_ssc_expire_umount() walks nn->nfsd_ssc_mount_list with
list_for_each_entry_safe(ni, tmp, ...). For each expired entry it
sets nsui_busy = true, drops nfsd_ssc_lock to run mntput() on the
source vfsmount, then reacquires the lock to list_del + kfree the
entry and continue iterating via the macro's saved tmp pointer.
The nsui_busy flag protects the current ni from concurrent
nfsd4_ssc_setup_dul() finders during the lock-drop window, but it
does not pin tmp. Another nfsd RPC thread that fails its source-
server mount and reaches nfsd4_ssc_cancel_dul() will, during that
same window, take nfsd_ssc_lock, list_del + kfree its own ssc_umount
item, and release the lock. If that item is the saved tmp of the
expire walk, the next iteration dereferences a freed
nfsd4_ssc_umount_item.
Restart the walk from the head after the mntput() unlock window so
no saved next pointer survives the lock-drop. The list is bounded
by the number of active inter-server source mounts (typically small)
and the expire delayed-work runs periodically rather than per-IO,
so the restart is cheap. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix cpntf publish race in nfs4_init_cp_state
nfs4_alloc_init_cpntf_state() published the new cpntf entry into the
s2s_cp_stateids IDR (with cs_type set) in one s2s_cp_lock section, then
took the lock again to list_add() it onto p_stid->sc_cp_list. In the gap
the entry is reachable by so_id but cp_list is still {NULL,NULL} from
kzalloc. A racing OFFLOAD_CANCEL (so_id is echoed to the client as
cnr_stateid, so any NFSv4.2 client can drive it) reaches
manage_cpntf_state() -> _free_cpntf_state_locked() and does list_del() on
the zeroed list_head, oopsing the server.
Fold the cs_type assignment and the list_add() into the same critical
section as idr_alloc_cyclic(), so a concurrent lookup either misses the
entry or sees a fully linked cp_list. INIT_LIST_HEAD() the entry after
allocation and switch _free_cpntf_state_locked() to list_del_init() so a
stale unlink is a no-op. nfs4_init_copy_state() passes NULL p_stid and
skips the list_add, preserving NFS4_COPY_STID semantics. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: initialize copy-notify stateid before publishing it
nfsd4_copy_notify() finished initializing the cpntf state after
nfs4_alloc_init_cpntf_state() had already linked it into the
s2s_cp_stateids IDR and the parent's sc_cp_list, with cs_count == 1 (the
membership reference) and none held for the caller. A racing
OFFLOAD_CANCEL (crafted cl_id == nn->s2s_cp_cl_id plus the guessable
so_id) could reach manage_cpntf_state() and free the entry, turning the
caller's subsequent cpn_cnr_stateid read and cp_p_stateid/cp_p_clid
writes into use-after-free. The owning clientid was also only recorded
after publication, so it could not gate an ownership check in that window.
Record cp_p_stateid and cp_p_clid inside nfs4_alloc_init_cpntf_state()
before nfs4_init_cp_state() publishes the entry, and return it with an
extra reference. The caller reads the stateid under that reference and
drops it with nfs4_put_cpntf_state(); on a late error the laundromat
reaps the entry. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: revoke copy-notify stateids before dropping their reference
Copy-notify stateids live in the s2s_cp_stateids IDR and on their parent
stid's sc_cp_list, pinned by a single membership reference.
_free_cpntf_state_locked() only unlinks an entry once its refcount reaches
zero, so any revoke path that runs while a concurrent
find_cpntf_state()/manage_cpntf_state() holder has elevated cs_count drops
the reference without unlinking, leaving the entry discoverable with its
membership reference already consumed. A second revoke or a laundromat tick
then frees it while the reader still holds the pointer -- a
KASAN-detectable use-after-free at the reader's nfs4_put_cpntf_state().
This affected all three revoke paths:
- The parent-stid drain (nfs4_free_cpntf_statelist()) repeatedly called
_free_cpntf_state_locked() on the first list entry; a holder that had
bumped cs_count made it return early, so the next iteration
re-decremented and burned the holder's reference.
- OFFLOAD_CANCEL (manage_cpntf_state()) and laundromat expiry likewise
used _free_cpntf_state_locked() and could drop 2->1 without unlinking.
Add revoke_cpntf_state_locked(), which unhashes the entry from the IDR and
sc_cp_list first (deferring the final free to any holder), and use it from
all three revoke paths. The drain now walks with list_for_each_entry_safe()
and revokes each entry unconditionally, so it terminates in one pass per
entry regardless of cs_count. The unhash is gated on
!list_empty(&cps->cp_list); the idr_remove() gate matters because
idr_alloc_cyclic() may have recycled the so_id by then. Keep
_free_cpntf_state_locked() for the reference-holder put path only, where a
concurrent revoke may already have unlinked the entry (its list_del_init()
then a no-op). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: stop device IO before hid_hw_stop
Quiesce device IO at the start of the devm cleanup callback
mcp2221_hid_unregister() so that incoming HID reports cannot race with
hardware teardown during probe failure or device removal, addressing a
potential use-after-free.
Guard the call to hid_device_io_stop() with io_started. On normal
removal hid_device_remove() has already cleared io_started before the
devres group is released, so an unconditional call would otherwise hit
the !io_started path and emit a spurious "io already stopped" warning
on every removal. The guard preserves the probe-failure balancing,
where io_started is still set after hid_device_io_start(), while
staying silent on the normal removal path. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Initialize ei->children and ei->list in init_ei()
eventfs_create_dir() allocates the eventfs_inode and initializes it with
init_ei(). But this does not initialize the eventfs_inode list_heads. If
the eventfs_create_dir() fails due to memory pressure, it will call
free_ei() before it initialized the lists, and that checks to make sure
the eventfs_inode has no children. But because the list wasn't
initialized, it will give a false warning.
Fix it by moving the list initialization into init_ei().
[ Rewrote change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: hold msg ctx list lock when cleaning daemon queue
ecryptfs_exorcise_daemon() drops queued messages from a dying daemon
without holding ecryptfs_msg_ctx_lists_mux, but
ecryptfs_msg_ctx_alloc_to_free() requires that lock.
Take the list lock while moving the queued contexts back to the free
list to avoid racing with other global msg ctx list users. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: charlcd: cancel backlight work on registration failure
With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before
charlcd_register() calls misc_register(). If registration fails, the
caller frees the charlcd object while delayed work still contains its
address.
Add charlcd_deinit() to cancel the delayed work and turn the backlight
off. Use it for both registration rollback and normal unregistration. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
During fuzz testing, the following issue was discovered:
BUG: KMSAN: uninit-value in __dma_map_sg_attrs+0x217/0x310
__dma_map_sg_attrs+0x217/0x310
dma_map_sg_attrs+0x4a/0x70
ata_qc_issue+0x9f8/0x1420
__ata_scsi_queuecmd+0x1657/0x1740
ata_scsi_queuecmd+0x79a/0x920
scsi_queue_rq+0x4472/0x4f40
blk_mq_dispatch_rq_list+0x1cca/0x3ee0
__blk_mq_sched_dispatch_requests+0x458/0x630
blk_mq_sched_dispatch_requests+0x15b/0x340
__blk_mq_run_hw_queue+0xe5/0x250
__blk_mq_delay_run_hw_queue+0x138/0x780
blk_mq_run_hw_queue+0x4bb/0x7e0
blk_mq_sched_insert_request+0x2a7/0x4c0
blk_execute_rq+0x497/0x8a0
sg_io+0xbe0/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Uninit was created at:
__alloc_pages+0x5c0/0xc80
alloc_pages+0xe0e/0x1050
blk_rq_map_user_iov+0x2b77/0x6100
blk_rq_map_user_io+0x2fa/0x4d0
sg_io+0xad6/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Bytes 14-15 of 16 are uninitialized
Memory access of size 16 starts at ffff88800cbdb000
When processing the last unaligned element of the scatterlist, it is
supplemented with missing bytes in the amount of pad_len. These bytes
remain uninitialized, which leads to a problem.
Extend last_sg->length by pad_len first, then use sg_zero_buffer() to
zero those pad_len bytes. sg_zero_buffer() uses sg_miter internally,
which correctly handles sg entries spanning multiple pages and padding
that crosses a page boundary.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: as3722_get_regulator_dt_data: fix premature of_node_put leaving dangling of_node pointer
In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a
reference on np, which is then assigned to pdev->dev.of_node. The
function immediately calls of_node_put(np), releasing the reference and
leaving pdev->dev.of_node as a dangling pointer.
Remove the of_node_put(np) call to let the device hold the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.
l.lwz r29,0(r4)
l.lwz r27,0(r5)
l.sw 0(r4),r27
l.sw 0(r5),r29
The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.
A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.
This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.
Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.
[shorne@gmail.com: fix comment style] |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: pin next file across nlm_inspect_file lock-drop
nlm_traverse_files() pins the current file with f_count++ across
a mutex_unlock for nlm_inspect_file(), but nothing pins the saved
next pointer. A concurrent nlm_release_file() can kfree the next
file during the unlock window, and the iterator dereferences freed
memory on the next loop step.
Pin both current and next before the lock-drop. Advance by
swapping the pinned cursors at the end of each iteration so next
is always held alive across the unlock.
Always call nlm_file_release() after dropping the iteration pin,
regardless of whether the file matched the predicate. Use
nlm_file_inuse(), which does a live walk of the inode lock list,
rather than the cached f_locks field, so skipped files that never
ran nlm_inspect_file() are evaluated correctly.
Because every file in a hash bucket is now pinned and released,
files skipped by the is_failover_file predicate that have no
locks, blocks, shares, or external references are deleted during
traversal. The old code never evaluated skipped files for
cleanup. The new behavior is intentional: such files are stale
and should not persist in the table. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq256xx: drain usb_work before freeing the charger
The USB-PHY notifier queues usb_work, whose handler calls
power_supply_changed(bq->charger). The reset devm action only unregisters
the notifier and was registered before the power supplies, so devm frees
bq->charger on unwind before the action runs; a usb_work still queued can
then dereference it.
Register the reset action after the power supplies, so it unregisters
the notifiers and drains usb_work before the supplies are released.
Initialize usb_work and obtain the PHY references before registering
the notifiers, so the worker cannot run before the supplies exist.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms
pchg->work via schedule_delayed_work(). lp8727_release_irq() currently
cancels the work before freeing the IRQ, so an IRQ delivered in between
can re-arm the work through the threaded handler. After .remove returns
the devm layer frees pchg while lp8727_delayed_func() may still run and
dereference it.
Free the IRQ first so the threaded handler is quiesced and can no longer
queue work, then cancel the delayed work to drain the final generation.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: twl4030_charger: cancel workers via devm
bci is devm-allocated. Two workers (bci->work and bci->current_worker)
dereference it. twl4030_bci_remove() disables charging and masks
interrupts. It cancels neither worker. A worker pending at remove() can
run after devm frees bci.
The USB transceiver comes from devm_usb_get_phy_by_node(). devm
unregisters its notifier only after remove() returns. A cancel_work_sync()
in remove() can then race a notifier reschedule. devm_work_autocancel()
and devm_delayed_work_autocancel() avoid that. They cancel the workers
during devm release, before bci is freed.
The current_worker is registered first, since devm will cancel in
reverse order and bci->work can reschedule current_worker.
[Move comment about order into the commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: synchronize work cancellation on suspend
max17040_work() requeues itself after every poll. cancel_delayed_work()
only cancels a pending instance and does not wait for a callback that is
already running.
If system suspend races with the polling callback, the callback can
continue accessing the fuel gauge and requeue itself after the suspend
callback returns.
Use cancel_delayed_work_sync() to ensure polling is quiesced before
suspend completes. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Do not complete a failed ESE read as successful
dasd_int_handler() completes an NRF read of an unallocated ESE track by
calling ese_read() and unconditionally marking the request
DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has
zeroed the destination buffer: a failed sense-data parse or a current
track outside the requested range both return early, leaving the
destination pages untouched. The request is still completed successfully,
so the block layer is handed stale / uninitialized memory instead of
zeros.
Check the ese_read() return value and fail the request through the normal
error path instead of forcing DASD_CQR_SUCCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: stop card-detect handling on probe failure
request_irq() registers the SD card-detect interrupt and the probe enables
it before mmc_add_host() runs. If mmc_add_host() fails, the error path only
unmaps the registers and returns: the interrupt stays registered, so the
handler keeps running against the host once it is freed. via_sdc_isr()
dereferences sdhost and its MMIO base and schedules carddet_work, which
via_sdc_card_detect() also runs against freed memory through its
container_of() dereference.
Add a probe-error path that disables and frees the interrupt and cancels
carddet_work before unmapping. carddet_work can re-enable the device
interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it
again after cancelling the work.
This issue was found by an in-house static analysis tool and confirmed by
manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In of_icc_get_by_index() and icc_get(), if the dynamic allocation for
path->name fails via kasprintf(), the error handling path directly
calls kfree(path) to free the path object and returns an error.
However, prior to this point, path_find() calls path_init(), which
already links the path's requests into the req_list of the respective
interconnect nodes via hlist_add_head(). Directly invoking kfree(path)
leaves dangling pointers in the hlist. A subsequent call to icc_get()
or icc_set_bw() will traverse or modify these corrupted lists, triggering
a slab use afterfree.
KASAN report showing the vulnerability when reproducing via debugfs:
BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc
Write of size 8 at addr fff000000d43f748 by task sh/1
...
Call trace:
kasan_report+0xac/0xfc
path_find+0x6f8/0xcfc
icc_get+0x148/0x380
icc_get_set+0xf8/0x2d0
...
Freed by task 1:
kfree+0x1a0/0x4a4
icc_get+0x2cc/0x380
icc_get_set+0xf8/0x2d0
Fix this by replacing kfree(path) with the proper teardown function,
icc_put(path), which safely removes the requests from the req_list using
hlist_del() and drops the provider usage references before freeing the
memory.
Additionally, in icc_get(), ensure that the icc_lock mutex is released
prior to calling icc_put(path) to avoid a deadlock, as icc_put()
internally acquires the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: unregister the connection before draining the rx tasklet
smc_conn_free() calls smc_ism_unset_conn() only while the link group is
still on its device list, and never sets conn->killed.
smc_lgr_terminate_sched() unlinks the group immediately and defers killing
its connections to a work item, so a connection freed in that window keeps
its smcd->conn[] slot with both gates in smcd_handle_irq() open, and the
device can re-arm the receive tasklet after tasklet_kill() has returned. On
the DMB-nocopy path the ghost send buffer is freed right after that drain,
so the re-armed tasklet dereferences it.
Unregister unconditionally and drain before the detach at both teardown
sites, mirroring rmb_desc, which smc_buf_unuse() releases after the drain.
Clear conn->sndbuf_desc before freeing it as well, so a reader that samples
the pointer cannot get one that is already freed. |
