| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A memory-handling weakness in the BSON deserialization component of the MongoDB C# Driver may cause data left over from previously processed content to be returned when specially crafted serialized input is parsed. An unauthenticated party able to supply serialized data to an application that maps certain primitive collection types can cause residual bytes from unrelated data processed earlier on the same execution thread to be surfaced as legitimate values. This can result in disclosure of a limited amount of information belonging to other requests or principals of the consuming application. No authentication or special privileges within the application are required. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Terminate the fgraph_data list when the reservation is not filled
fprobe_fgraph_entry() reserves shadow stack space for every fprobe with
an exit handler, but only fills it for those whose entry handler returns
0. fgraph_reserve_data() does not clear the area, so fprobe_return()
parses the unused tail as headers left over from an earlier call, and an
exit handler can run twice or despite its entry handler asking to skip
it.
Write a zero word after the last entry to terminate the walk. A zeroed
slot does not decode to a NULL fprobe on the arches that encode the
header into one unsigned long, since arch_decode_fprobe_header_fp() ORs
in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL
for a zeroed slot. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: adi-axi-adc: Initialize state mutex
The AXI ADC register access paths serialize transactions with st->lock,
but probe does not initialize it. Initialize the mutex before registering
the backend. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: rt1017-sdca-sdw: fix uninitialized stream_config->type
stream_config is not initialized before being passed to
sdw_stream_add_slave(). The type field may contain garbage and is
later copied to stream->type by sdw_config_stream().
Zero-initialize stream_config so type defaults to SDW_STREAM_PCM.
While at it, use snd_sdw_params_to_config() helper instead of
open-coding the same logic. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: initialize _md in vxlan_xmit_one()
If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and
VXLAN_F_GBP, and a packet is transmitted through it using an external
ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left
pointing to the uninitialized _md stack variable:
if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) {
if (info->options_len < sizeof(*md))
goto drop;
md = ip_tunnel_info_opts(info);
}
Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains
pointing to _md. Later, vxlan_build_skb() is called with md, which
eventually calls vxlan_build_gbp_hdr():
if (vxflags & VXLAN_F_GBP)
vxlan_build_gbp_hdr(vxh, md);
Inside vxlan_build_gbp_hdr(), md->gbp is read:
if (!md->gbp)
return;
gbp = (struct vxlanhdr_gbp *)vxh;
...
if (md->gbp & VXLAN_GBP_DONT_LEARN)
gbp->dont_learn = 1;
If the stack contains garbage, this causes:
1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header.
2) gbp->dont_learn and gbp->policy_applied to be set from stack bits.
3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data,
leaking it onto the wire.
Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not
present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early
without modifying the VXLAN header. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: validate URB actual_length in interrupt callback
i_usx2y_in04_int() processes the interrupt URB data without checking
urb->actual_length. A short transfer from a malfunctioning device
would cause the handler to process uninitialized heap data from the
kmalloc-allocated in04_buf, which is then copied to the mmap-accessible
ctl_snapshot[] array.
Fix by using kzalloc() for in04_buf to zero-initialize the buffer,
and adding an actual_length check to skip processing on short
transfers while still resubmitting the URB. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (asus_rog_ryujin) Validate HID report lengths
rog_ryujin_raw_event() parses response headers and payload fields without
first checking that they are present in the received report. A short report
can therefore make the driver consume uninitialized bytes from the HID
transport buffer and expose them as sensor values through sysfs.
Validate the response header and the fields used by each response type
before parsing them. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: zero-initialize stack-allocated cifs_open_info_data
Stack-allocated cifs_open_info_data may contain random data.
This can make some fields have wrong value if they are not set later. |
| In the Linux kernel, the following vulnerability has been resolved:
block: zero non-PI portion of auto integrity buffer
The auto-generated integrity buffer for writes needs to be fully
initialized before being passed to the underlying block device,
otherwise the uninitialized memory can be read back by userspace or
anyone with physical access to the storage device. If protection
information is generated, that portion of the integrity buffer is
already initialized. The integrity data is also zeroed if PI generation
is disabled via sysfs or the PI tuple size is 0. However, this misses
the case where PI is generated and the PI tuple size is nonzero, but the
metadata size is larger than the PI tuple. In this case, the remainder
("opaque") of the metadata is left uninitialized.
Generalize the BLK_INTEGRITY_CSUM_NONE check to cover any case when the
metadata is larger than just the PI tuple. |
| A vulnerability was identified in Eleveo Call Recording Software 9.7.0. This vulnerability affects unknown code of the file /callrec/userAddAction.do of the component User Management. Such manipulation of the argument Username leads to ldap injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| When authenticating to a POP3 or SMTP server using NTLM, Thunderbird did not check whether the server's challenge was valid base64. A malicious server could send a challenge that caused Thunderbird to include uninitialized heap memory in its NTLM response, disclosing that memory to the server. A challenge consisting only of base64 padding also caused an out-of-bounds read, crashing Thunderbird. This affected accounts configured to use NTLM or GSSAPI authentication. The uninitialized memory disclosure only affected NTLM. This vulnerability was fixed in Thunderbird 158.0.1 and Thunderbird 153.5.1. |
| libexpat 2.7.2 through 2.9.0 contains a denial of service vulnerability because XML_ParserReset zeroes the direct byte count but never offsets tracked heap allocations. Attackers can submit a large XML document so later documents on the same reset parser fail with XML_ERROR_NO_MEMORY until it is recreated. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix potential stack infoleak in em_text_dump()
em_text_dump() allocates struct tcf_em_text on the stack without zeroing
it. strscpy() writes the algorithm name and a NUL terminator into
conf.algo[], leaving the remaining bytes uninitialised. nla_put_nohdr()
then copies the full struct to the netlink response.
KMSAN on Linux 7.2-rc6 reports two kernel-infoleak splats from this path,
one triggered via "tc filter show" and one via a raw RTM_GETTFILTER dump:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1c9/0x2620
nla_put_nohdr+0x83/0x130
em_text_dump+0x291/0x550
Local variable conf created at: em_text_dump+0x5d/0x550
Bytes 168-179 of 199 are uninitialized
I am not certain whether this constitutes a real security problem in
practice: the test was conducted in a controlled KMSAN environment and
the leaked stack bytes may or may not carry sensitive data on actual
production kernels. I am reporting it because KMSAN flagged it as a
kernel-infoleak and the fix is straightforward. I can provide a
userspace reproducer on request.
The original code used strncpy() which zero-pads to the destination size.
Commit b04202d6065c ("net/sched: replace strncpy with strscpy") replaced
it with strscpy(), which does not pad, creating this condition.
Zero-initialising the struct closes it. |
| Use of uninitialized resource in Windows Kernel allows an authorized attacker to disclose information locally. |
| Description
When NGINX Plus or NGINX Open Source is configured with ssl_session_cache
shared:name:size
without an explicit ssl_session_ticket_key file directives to automatically rotate SSL session ticket keys, a remote unauthenticated attacker is able to forge client SSL sessions
in a non-deterministic manner that is beyond the attacker's control. An attacker could leverage this vulnerability to bypass verification of client certificates.
Impact
This vulnerability can lead to the exposure of resources or functionality to unintended actors, possibly providing attackers with access to sensitive information. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: fix kernel stack leak to user-space in error path
If we fail to acquire the GPIO chip guard in gpio_desc_to_lineinfo(), we
return immediately before zeroing the info struct we'll end up passing
to the user-space later in lineinfo_get_v1(). This may leak the kernel
stack contents. Make gpio_desc_to_lineinfo() return int so that the
-ENODEV returned on failure to acquire the guard can be propagated to
the callers.
While not strictly necessary: move the memset() before trying to acquire
the SRCU read lock too for good measure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in
ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn
object with kmem_cache_alloc(). The function then initializes many
fields explicitly, but only resets in_seq.delta and out_seq.delta in the
two struct ip_vs_seq members.
That leaves init_seq and previous_delta uninitialized. This is normally
harmless while the corresponding IP_VS_CONN_F_IN_SEQ or
IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync
message, however, ip_vs_proc_conn() preserves those flags from
IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits
IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with
SEQ flags set but with the rest of in_seq/out_seq still containing stale
slab data.
When a packet for such a connection is later handled by an IPVS
application helper, vs_fix_seq() and vs_fix_ack_seq() use
previous_delta and init_seq to rewrite TCP sequence numbers. A malformed
sync message can therefore make forwarded packets carry stale slab bytes
in their TCP seq/ack numbers, and can also corrupt the forwarded TCP
flow.
Reset both struct ip_vs_seq members completely before publishing the
connection. This matches the existing "reset struct ip_vs_seq" comment
and keeps the sequence-adjustment gates inactive unless valid sequence
data is installed later. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00: avoid full teardown before work setup in probe
rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for
all probe failures. However, drv_data allocation and workqueue allocation
can fail before intf_work, autowakeup_work and sleep_work have been
initialized.
Do not enter the full remove path until the probe has reached the point
where those work items are set up. Return directly for drv_data allocation
failure, and use a small early cleanup path for workqueue allocation
failure.
This issue was found by our static analysis tool and then confirmed by
manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The
early probe exits should not call a common teardown path that assumes the
later work setup has already completed.
A QEMU PoC forced alloc_ordered_workqueue() to fail before the work
initializers are reached. The resulting fail path entered
rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with
rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: publish QP after initialization
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: zero chainstack array
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place. |
