| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in INSTAR 2K+ and 4K 3.11.1 Build 1124. This issue affects some unknown processing of the component UART Interface. The manipulation leads to improper physical access control. It is possible to launch the attack on the physical device. The exploit has been disclosed to the public and may be used. |
| A broken authorization vulnerability in Kiloview NDI N30 allows a remote unauthenticated attacker to deactivate user verification, giving them access to state changing actions that should only be initiated by administratorsThis issue affects
Kiloview NDI N30
and was fixed in Firmware version later than 2.02.0246 |
| An unauthenticated user can connect to a publicly accessible database using arbitrary credentials. The system grants full access to the database by leveraging a previously authenticated connection through a "mmBackup" application. This flaw allows attackers to bypass authentication mechanisms and gain unauthorized access to database with sensitive data.
This issue affects Asseco mMedica in versions before 11.9.5. |
| A security flaw has been discovered in FNKvision Y215 CCTV Camera 10.194.120.40. This affects an unknown part of the file /tmp/wpa_supplicant.conf. Performing manipulation results in information disclosure. The attack may be carried out on the physical device. The attack's complexity is rated as high. It is indicated that the exploitability is difficult. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| SummaryA user with administrator rights can change the configuration of the mautic application and extract secrets that are not normally available.
ImpactAn administrator who usually does not have access to certain parameters, such as database credentials, can disclose them. |
| A security flaw has been discovered in elunez eladmin 1.1. Impacted is the function deleteFile of the component LocalStorageController. The manipulation results in improper authorization. The attack may be performed from remote. The exploit has been released to the public and may be exploited. |
| Improper authentication vulnerability in Novakon P series allows unauthenticated attackers to upload and download any application from/to the device.This issue affects P series: P – V2001.A.C518o2 until P-2.0.05 Build
2026.02.06 (commit d0f97fd9). |
| ExaGrid EX10 6.3 - 7.0.1.P08 is vulnerable to Incorrect Access Control. Since version 6.3, ExaGrid enforces restrictions preventing users with the Admin role from creating or modifying users with the Security Officer role without approval. However, a flaw in the account creation process allows an attacker to bypass these restrictions via API request manipulation. An attacker with an Admin access can intercept and modify the API request during user creation, altering the parameters to assign the new account to the ExaGrid Security Officers group without the required approval. |
| Fedify is a TypeScript library for building federated server apps powered by ActivityPub. In versions below 1.3.20, 1.4.0-dev.585 through 1.4.12, 1.5.0-dev.636 through 1.5.4, 1.6.0-dev.754 through 1.6.7, 1.7.0-pr.251.885 through 1.7.8 and 1.8.0-dev.909 through 1.8.4, an authentication bypass vulnerability allows any unauthenticated attacker to impersonate any ActivityPub actor by sending forged activities signed with their own keys. Activities are processed before verifying the signing key belongs to the claimed actor, enabling complete actor impersonation across all Fedify instances. This is fixed in versions 1.3.20, 1.4.13, 1.5.5, 1.6.8, 1.7.9 and 1.8.5. |
| SystemUI has an incorrect component protection setting, which allows access to specific information. |
| RabbitMQ is a feature rich, multi-protocol messaging and streaming broker. In affected versions queue deletion via the HTTP API was not verifying the `configure` permission of the user. Users who had all of the following: 1. Valid credentials, 2. Some permissions for the target virtual host & 3. HTTP API access. could delete queues it had no (deletion) permissions for. This issue has been addressed in version 3.12.11 of the open source rabbitMQ release and in versions 1.5.2, 3.13.0, and 4.0.0 of the tanzu release. Users are advised to upgrade. Users unable to upgrade may disable management plugin and use, for example, Prometheus and Grafana for monitoring. |
| A vulnerability was identified in ProudMuBai GoFilm 1.0.0/1.0.1. Impacted is the function SingleUpload of the file /server/controller/FileController.go. The manipulation of the argument File leads to unrestricted upload. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Spring Cloud Config Server may not use Vault token sent by clients using a X-CONFIG-TOKEN header when making requests to Vault.
Your application may be affected by this if the following are true:
* You have Spring Vault on the classpath of your Spring Cloud Config Server and
* You are using the X-CONFIG-TOKEN header to send a Vault token to the Spring Cloud Config Server for the Config Server to use when making requests to Vault and
* You are using the default Spring Vault SessionManager implementation LifecycleAwareSessionManager or a SessionManager implementation that persists the Vault token such as SimpleSessionManager.
In this case the SessionManager persists the first token it retrieves and will continue to use that token even if client requests to the Spring Cloud Config Server include a X-CONFIG-TOKEN header with a different value.
Affected Spring Products and Versions
Spring Cloud Config:
* 2.2.1.RELEASE - 4.2.1
Mitigation
Users of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability4.2.x4.2.2OSS4.1.x4.1.6OSS4.0.x4.0.10Commercial3.1.x3.1.10Commercial3.0.x4.1.6OSS2.2.x4.1.6OSS
NOTE: Spring Cloud Config 3.0.x and 2.2.x are no longer under open source or commercial support. Users of these versions are encouraged to upgrade to a supported version.
No other mitigation steps are necessary. |
| Improper access control for some Intel(R) Rapid Storage Technology installation software may allow an authenticated user to potentially enable escalation of privilege via local access. |
| ExaGrid EX10 6.3 - 7.0.1.P08 is vulnerable to Incorrect Access Control in the MailConfiguration API endpoint, where users with operator-level privileges can issue an HTTP request to retrieve SMTP credentials, including plaintext passwords. |
| The MIB3 infotainment unit used in Skoda and Volkswagen vehicles does not incorporate any privilege separation for the proprietary inter-process communication mechanism, leaving attackers with presence in the system an ability to undermine access control restrictions implemented at the operating system level.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the "persist.sys.tctPowerIccid" system property to indirectly obtain the ICCID. |
| Improper access control in BMC Firmware for the Intel(R) Server Board S2600WF, Intel(R) Server Board S2600ST, Intel(R) Server Board S2600BP, before version 02.01.0017 and Intel(R) Server Board M50CYP and Intel(R) Server Board D50TNP before version R01.01.0009 may allow an authenticated user to enable escalation of privilege via local access. |
| BloodX 1.0 contains an authentication bypass vulnerability in login.php that allows attackers to access the dashboard without valid credentials. Attackers can exploit the vulnerability by sending a crafted payload with '=''or' parameters to bypass login authentication and gain unauthorized access. |
| An issue was discovered in a third-party com.factory.mmigroup component, shipped on devices from multiple device manufacturers. Certain software builds for various Android devices contain a vulnerable pre-installed app with a package name of com.factory.mmigroup (versionCode='3', versionName='2.1) that allows local third-party apps to perform various actions, due to inadequate access control, in its context (system user), but the functionalities exposed depend on the specific device. The following capabilities are exposed to zero-permission, third-party apps on the following devices: arbitrary AT command execution via AT command injection (T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, and Boost Mobile Celero 5G); programmatic factory reset (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD), leaking IMEI (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); leaking serial number (Samsung Galaxy A03s, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD); powering off the device (Realme C25Y, Samsung Galaxy A03S, and T-Mobile Revvl 6 Pro 5G); and programmatically enabling/disabling airplane mode (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); and enabling Wi-Fi, Bluetooth, and GPS (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y). No permissions or special privileges are necessary to exploit the vulnerabilities in the com.factory.mmigroup app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V064:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V061:user/release-keys, and Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V052:user/release-keys); Samsung Galaxy A03S (samsung/a03sutfn/a03su:13/TP1A.220624.014/S134DLUDU6CWB6:user/release-keys and samsung/a03sutfn/a03su:12/SP1A.210812.016/S134DLUDS5BWA1:user/release-keys); Lenovo Tab M8 HD (Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300637_220706_BMP:user/release-keys and Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300448_220114_BMP:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys and T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V066:user/release-keys); T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys and T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V060:user/release-keys); and Realme C25Y (realme/RMX3269/RED8F6:11/RP1A.201005.001/1675861640000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1664031768000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1652814687000:user/release-keys, and realme/RMX3269/RED8F6:11/RP1A.201005.001/1635785712000:user/release-keys). This malicious app sends a broadcast Intent to com.factory.mmigroup/.MMIGroupReceiver. This causes the com.factory.mmigroup app to dynamically register for various action strings. The malicious app can then send these strings, allowing it to perform various behaviors that the com.factory.mmigroup app exposes. The actual behaviors exposed by the com.factory.mmigroup app depend on device model and chipset. The com.factory.mmigroup app executes as the "system" user, allowing it to interact with the baseband processor and perform various other sensitive actions. |
