| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: ibss: wait for in-flight TX on disconnect
While leaving an IBSS in ieee80211_ibss_disconnect() mac80211 flushes
stations, turns the carrier off and immediately tells the driver to
leave as well. While there may be synchronize_net() in station flush
and in this code later, packets can still be transmitted due to
cross-CPU race conditions after carrier off is set.
Therefore, it's possible for a race to happen where a TX to the
driver occurs while or after telling it to leave the IBSS. This can
be confusing to drivers, and in the case of iwlwifi leads to an
attempt to use invalid queues.
Move netif_carrier_off() to occur before sta_info_flush() during
IBSS disconnect, and add synchronize_net() if flushing didn't,
so that the synchronize_net() always happens between turning the
carrier off and telling the driver, avoiding this race. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Make nr_deadline_tasks an atomic_t
The nr_deadline_tasks variable in the cpuset structure was introduced by
commit 6c24849f5515 ("sched/cpuset: Keep track of SCHED_DEADLINE task
in cpusets"). It is reported by sashiko [1] that nr_deadline_tasks
can currently be modified by inc_dl_tasks_cs() under rq->lock and
by cpuset_attach() under cpuset_mutex. So if both updates happen
simultaneously, the nr_deadline_tasks variable can be corrupted leading
to incorrect operations down the road.
Fix that by changing its type to atomic_t so that nr_deadline_tasks
are always atomically updated. This fix patch is a low hanging fruit.
It can handle some of the races between a concurrent sched_setscheduler()
and cpuset_can_attach()/cpuset_attach() calls, but not all of them like
the other issue raised by sashiko [2]. This will be handled hopefully
in a future follow up patch.
[1] https://sashiko.dev/#/patchset/20260626181923.133658-1-longman%40redhat.com
[2] https://sashiko.dev/#/patchset/20260630033344.352702-1-longman%40redhat.com |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Avoid IDR updates while cleaning channels
scmi_cleanup_channels() walks the TX/RX channel IDRs with
idr_for_each() to free transport resources and destroy the dedicated
transport devices before calling idr_destroy().
The destroy callback removed each entry from the same IDR being walked.
That is not needed for this cleanup path, and it is unsafe because
idr_for_each() has not advanced its radix-tree iterator while the
callback is running. Removing the current entry from the callback can
invalidate the iterator state. The callback also cannot be protected by
rcu_read_lock(), because scmi_device_destroy() may sleep.
Leave IDR teardown to the following idr_destroy() call and keep the
callback limited to device destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments
Make sure we don't end-up with a num_frags = 0 situation.
For that, check that the required size is not 0 and put a checker on
num_frags as well. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix requested device removal race
scmi_protocol_device_unrequest() drops scmi_requested_devices_mtx while
notifying listeners but continues to retain the per-protocol list head.
When two SCMI drivers for the same protocol unregister concurrently, one
thread can remove the final request and free the list head while the other
is running its notifier. The latter then dereferences the freed list head
after reacquiring the mutex and can free it a second time.
Complete the list and IDR updates, including freeing an empty list head,
before dropping the mutex. Keep the blocking notifier outside the critical
section and retain only the detached request across the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARNING in bpf_tracing_link_release
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: davinci: switch to managed controller allocation
The controller is allocated with the non-managed spi_alloc_host() while
the interrupt is registered with devm_request_threaded_irq(). During
removal, spi_bitbang_stop() only unregisters the controller; the
subsequent spi_controller_put() then frees the controller together with
its embedded davinci_spi devdata, which is the IRQ handler's dev_id.
The devm_request_threaded_irq() release action (free_irq()), which
drains the handler, does not run until after .remove() returns. A late
or latched interrupt can therefore reach davinci_spi_irq() and
dereference already-freed memory.
Switch to devm_spi_alloc_host() so that the devres LIFO order releases
the controller only after free_irq() has drained the handler, and drop
the now-redundant spi_controller_put() from .remove(). The probe error
path is simplified to direct returns.
The clock is acquired with devm_clk_get_enabled(), which is registered
after the IRQ and thus released before it by the devres LIFO order.
Drain the interrupt explicitly with devm_free_irq() before disabling the
controller so that a late interrupt cannot access the registers of a
clock-gated controller.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: sgi-gru: remove interrupt-context page-table walks
The GRU TLB miss handler walks a process's page tables without holding
page-table locks or a reference to the mapped page. It also uses a kernel
page-table accessor on user page tables and supports only PMD-level large
mappings on x86-64.
Remove the direct walker. Send interrupt faults directly to user polling
mode so the existing call-OS fallback retries them in process context.
Remove the mmap-lock failure statistic that can no longer be incremented. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/cluster: keep heartbeat local node stable
o2nm_node_local_store() handles local=0 by stopping o2net and setting
cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set.
That stale state makes o2nm_this_node() return 255, blocks a later local=1
attempt with -EBUSY, and can feed 255 to heartbeat users that call
o2nm_this_node() dynamically.
Clearing cl_has_local is required when the local node is reset. But
heartbeat threads can still be running at that point. They pin the local
node config item at startup, yet o2hb_do_disk_heartbeat() and thread
teardown re-read o2nm_this_node() for the local slot and for
o2nm_undepend_this_node(). Once local=0 has cleared the live local-node
state, those dynamic reads return O2NM_MAX_NODES, which is also the
invalid node number 255.
Store the local node number in the heartbeat region when the region
starts. Use that stable node for heartbeat slot writes/checks,
negotiation messages, and the final configfs undepend. Stop the heartbeat
loop when the current local node no longer matches the stored node, and
clear cl_has_local together with cl_local_node in the local=0 path so
nodemanager state matches node removal.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in o2hb_do_disk_heartbeat+0x372/0xb30
RIP: 0010:memset+0xf/0x20
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xd0/0x630
o2hb_do_disk_heartbeat+0x372/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x188/0x2f0
kasan_report+0xe4/0x120
o2hb_do_disk_heartbeat+0x5/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
o2hb_thread+0x14e/0x770
kthread_affine_node+0x139/0x180
lockdep_hardirqs_on_prepare+0xda/0x190
trace_hardirqs_on+0x18/0x130
kthread+0x19d/0x1e0
ret_from_fork+0x37a/0x4d0
__switch_to+0x2d5/0x6f0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: xprtsock: annotate shared socket callbacks with READ_ONCE/WRITE_ONCE
xprtsock replaces and restores sk->sk_data_ready and
sk->sk_write_space on live sockets with plain stores, and
xs_udp_do_set_buffer_size() invokes sk->sk_write_space via a plain
load. These callback pointers are shared with generic socket and
protocol paths that may read or invoke them concurrently, so xprtsock
needs the same READ_ONCE()/WRITE_ONCE() callback visibility contract
that the validated 4022 family applied elsewhere.
When SUNRPC takes over an AF_LOCAL, UDP, or TCP socket and later
restores the lower-socket callbacks during teardown, another CPU may
still hold an earlier callback snapshot. The plain replace/restore
pattern leaves the same visibility hole as the validated 4022 family,
so a stale snapshot can still invoke xs_data_ready() or
xs_udp_write_space() after the live callback fields have already been
restored to the lower-socket handlers.
Use WRITE_ONCE() for the shared sk_data_ready and sk_write_space
stores in xs_local_finish_connecting(), xs_udp_finish_connecting(),
xs_tcp_finish_connecting(), and xs_restore_old_callbacks(). Use
READ_ONCE() for the direct sk_write_space invocation in
xs_udp_do_set_buffer_size(). This matches the required callback
visibility contract while leaving adjacent sk_state_change and
sk_error_report handling unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix max_qid race between configfs and controller allocation
The function nvmet_subsys_attr_qid_max_store() can race against
nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified.
Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes:
ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1);
and at this exact point, a userspace process changes max_qid to 128,
nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It
attempts to delete active controllers to force a reconnect, but the
new controller won't be deleted because it hasn't been added to the
subsys->ctrls list yet.
nvmet_alloc_ctrl() then proceeds and adds the new controller to the
subsys->ctrls list. Later, when nvmet_install_queue() is called, it
will see max_qid set to 128, but the memory allocated for sqs is only
sized for 64 entries. This results in a KASAN out-of-bounds warning
and potential memory corruptions.
Fix this by protecting the queue allocations and list insertion in
nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because
nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem)
to modify the attribute, this safely prevents the configfs writer from
modifying max_qid during controller creation.
Copy the max_qid from the subsystem to the controller's structure
during the allocation; ctrl->max_qid never changes as long as the
controller remains in LIVE state, so this will prevent similar race
conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize oplock close with pending break ownership
close may abort an in-flight oplock break while another breaker already
holds an opinfo reference. Releasing pending_break wakes that waiter, but
without serializing the close transition with bit acquisition it can become
a new break owner through the test_and_set_bit() fast path. It can then
overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for
a dying opinfo.
Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode
list. Serialize that transition, pending_break acquisition, and
OPLOCK_ACK_WAIT setup with an opinfo state lock. A breaker which loses
the race releases its ownership and returns -ENOENT. Explicitly wake
pending_break waiters during close so they can observe the terminal state.
Also prevent ACK and timeout paths from replacing OPLOCK_CLOSING with
OPLOCK_STATE_NONE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: arp/nd proxy: fix reading neigh ha
Currently neigh ha address is read directly, but that can result in
torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot
to take a stable snapshot of the address. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-vf: fix workqueue and netdev race in probe/remove
Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode
does not queue work on a NULL workqueue. Unregister the netdev before
destroying the workqueue, and add proper probe error cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: add missing SRCU grace period in error path
nvme_alloc_ns() error path at out_unlink_ns removes ns from the
namespace head siblings list with list_del_rcu(&ns->siblings) but
does not wait for SRCU readers before freeing the namespace struct.
Multipath code iterates the head->list under srcu_read_lock() in
nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent
reader can still hold a reference to ns when kfree(ns) runs.
The normal removal path in nvme_ns_remove() correctly calls
synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for
in-progress readers. Add the same grace period in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm()
In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to
&matrix_mdev->pqap_hook before the update locks are acquired and the
mdev list is checked for a conflicting assignment. If another mdev is
already attached to the same KVM instance, the function returns -EPERM
without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook
pointing at the failing matrix_mdev instead of the mdev that legitimately
owns the KVM.
Since matrix_mdev->kvm is never set on this error path,
vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev
is later closed. If matrix_mdev is subsequently freed, any PQAP
instruction executed by the guest will dereference the stale pointer
through pqap_hook_rwsem, resulting in a use-after-free.
Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm()
function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check
for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine
whether it belongs to another mdev. This will alleviate the need to iterate
the matrix_dev->mdev_list list to see if the kvm object is assigned to
another mdev.This was introduced in v3 to alleviate the need to take the
mdevs_lock while iterating the list; however, this did not prevent a
potential race condition.
The pqap_hook_rwsem(write) is now performed inside
get_update_locks_for_kvm(), which is updated to acquire
pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering
is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem
in read mode while srcu is held under vcpu->mutex, establishing the
dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read).
The pqap_hook_rwsem is now released inside the
release_update_locks_for_kvm(), which is updated to release
pqap_hook_rwsem(write) between mdevs_lock and kvm->lock.
Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved
after release_update_locks_for_kvm(). Previously it was called while
kvm->lock was held; if it were ever the last reference, kvm_destroy_vm()
would run under kvm->lock, which would deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add TLB flush after MES queue eviction/suspension
MES (Micro Engine Scheduler) does not perform heavy-weight TLB
invalidation after unmapping queues, unlike HWS which does this
automatically. This causes a race condition where in-flight DMA
descriptors can access memory that has been unmapped, leading to page
faults and GPU queue hangs during SVM page migration.
The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest
failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU
compute queue hangs with packets submitted but never consumed.
Add kfd_flush_tlb() calls after MES queue removal in two locations:
- evict_process_queues_cpsch(): after all queues removed during eviction
- suspend_queues(): after debug/criu queue suspension (with mem_fence barrier)
This ensures all in-flight memory accesses from unmapped queues are
flushed before memory is freed or migrated.
(cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: check truncate permission under inode lock
nfsd_setattr() checks whether a size update needs NFSD_MAY_TRUNC
before it takes inode_lock(). The comparison uses the file size sampled
by that unlocked read, but the actual ATTR_SIZE update is applied later
under inode_lock() by notify_change().
This leaves a TOCTOU window for append-only files. If a client sends a
SETATTR that does not shrink the file at the time of the unlocked
sample, a concurrent append can extend the file before nfsd_setattr()
takes inode_lock(). notify_change() then applies a real truncation
without the NFSD_MAY_TRUNC check that rejects IS_APPEND(inode). The VFS
truncate syscall paths perform their own append-only checks before
calling notify_change(), so NFSD must make this decision against the
locked size it is about to change.
Split the write-count acquisition from the truncation permission check.
Keep get_write_access() before the locked setattr work, then recheck
whether the requested size is below i_size_read(inode) after inode_lock()
has been acquired and before notify_change(ATTR_SIZE). This also avoids
the plain unlocked inode->i_size load. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in check_new_map() on session freed during unlock
check_new_map() iterates mdsc->sessions[] and for each active session
drops mdsc->mutex to perform per-session operations. The forced-close
path (rank removed from map) correctly takes a reference on s via
ceph_get_mds_session() before releasing mdsc->mutex, but three other
paths do not:
Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex)
Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s)
Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex)
Without the extra reference, another thread can acquire mdsc->mutex
during the unlock window, call __unregister_session() which drops the
last reference on s, and free it. The original thread then accesses
freed memory via s->s_mutex.
Fix by adding ceph_get_mds_session(s) before each mutex_unlock and
ceph_put_mds_session(s) after the corresponding mutex_lock, matching
the pattern already used in the forced-close path.
Race timeline (Path A):
Thread A (check_new_map) Thread B (another map update
holds mdsc->mutex or session teardown)
-------------------------- --------------------------
s = mdsc->sessions[i]
(refcount == 1, held only by
sessions[] array)
mutex_unlock(&mdsc->mutex)
---> acquires mdsc->mutex
__unregister_session(mdsc, s)
sessions[i] = NULL
ceph_put_mds_session(s)
refcount: 1 -> 0
kfree(s) <--- freed!
mutex_lock(&s->s_mutex)
UAF on freed s->s_mutex |
