| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When a broker decodes a compressed record batch, the per-record decoder reads a declared body size from the decompressed stream and allocates a buffer of that size before validating it against the bytes available or any configured limit. The size is attacker-controlled, and the batch CRC does not constrain it, so a small (around 90-byte), CRC-valid compressed produce request can declare a body size of up to about 2 GiB and force the broker to attempt that allocation, raising OutOfMemoryError. The record size limit (max.message.bytes), the request size limit, and client/broker quotas bound only the compressed wire size, not the declared decompressed size.
Impact:
An authenticated principal with Write on a topic can crash broker request-handler threads (reached when a batch's codec differs from the topic's compression.type and records are re-encoded) and any consumer that fetches the record, denying service. On brokers started with -XX:+ExitOnOutOfMemoryError, a common hardening, a single crafted request terminates the broker JVM. More seriously, a crafted record is accepted at ingest and written to disk; when the log-cleaner later reads it on a compacted topic, the OutOfMemoryError (an Error, not an Exception) terminates the cleaner thread, which is not restarted. With the default of a single cleaner thread, log compaction then stops for the entire broker, including the internal __consumer_offsets and __transaction_state topics, and the condition persists across restarts until the offending record is removed. The impact is availability only; no data is disclosed or altered.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0, and set max.decompressed.message.bytes (at the broker and/or topic level) to a bounded value appropriate for your workload. Upgrading alone is not sufficient: for backward compatibility this configuration defaults to an effectively unlimited value (about 2 GiB), so a broker remains exposed until the limit is set. Choose a value at or slightly above the largest legitimate decompressed record your applications produce, and comfortably below the broker heap divided by the number of request-handler and cleaner threads. Until you can upgrade and configure the limit, restrict Write access to trusted producers; quotas and max.message.bytes do not mitigate this issue.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the broker validates a record's declared decompressed body size against max.decompressed.message.bytes before allocating, on the produce-validation, log-compaction, and timestamp-lookup paths, and rejects oversized or negative sizes with InvalidRecordException. Operators must set this configuration to a bounded value to be protected, as its default is effectively unlimited. |
| When using the OpenSSL TLS implementation, both the pn_ssl_domain_set_trusted_ca_db() & pn_tls_config_set_trusted_certs() APIs added to rather than replaced the default system trust anchors. Leading to potentially trusting unexpected peer certificates.
This can be worked around by setting the SSL_CERT_FILE environment variable for the application to /dev/null.
This issue does not affect the Win32 SChannel TLS implementation.
This issue affects Apache Qpid Proton C: through 0.40.0.
Users are recommended to upgrade to version 0.41.1, which fixes the issue. |
| A message body that is deeply nested and decoded by pn_message_body() could overflow the stack and cause a crash.
This issue affects Apache Qpid Proton C: through 0.40.0.
Users are recommended to upgrade to version 0.41.1, which fixes the issue. |
| When dispatching SASL frames to authenticate the peer, Proton will also dispatch AMQP frames if they claim to be SASL frames. This allows authentication bypass. However there will be no user name set so the effects depend on how the application deals with this condition - which otherwise means that authentication has not completed yet.
This issue affects Apache Qpid Proton C: through 0.40.0.
Users are recommended to upgrade to version 0.41.1, which fixes the issue. |
| A misconfigured wildcard TLS certificate causes a stack read overflow.
This issue does not affect any wildcard certificate issued to the RFC9525 standard - the fix only accepts certificates that comply to this standard.
This issue affects Apache Qpid Proton C: through 0.40.0.
Users are recommended to upgrade to version 0.41.1, which fixes the issue. |
| In apache-airflow-providers-ssh before 7.0.1, SSHRemoteJobOperator quoted the values of its templated `environment` parameter only once, although they are placed inside an already-quoted wrapper script, so shell syntax such as `$(...)` in a value was executed on the remote SSH host. In a Dag that passes trigger-time input such as `params` or `dag_run.conf` into `environment`, a user who can trigger that Dag but cannot author Dags could run arbitrary commands on the remote host as the SSH connection's user. Users are advised to upgrade apache-airflow-providers-ssh to 7.0.1 or later. |
| Vulnerability in the SQL storage module of Apache SIS. When sorting a stream of features, the clause is copied after ORDER BY without quoting the identifier character. A crafter sort clause could inject SQL in the query.
This issue affects the sql-storage module of Apache SIS from version 1.0 through 1.6 inclusive. Other modules such as sis-referencing are not impacted. Users are recommended to upgrade to version 1.7, which fixes the issue. |
| **UNSUPPORTED WHEN ASSIGNED** Unbounded allocation in XML parsing in Apache Vysper; all versions, may lead to an out of memory condition.
This issue affects all versions of Apache Vysper. Apache Vysper is an XMPP (Jabber) server library.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative. |
| **UNSUPPORTED WHEN ASSIGNED** Authorization bypass in Apache Vysper, all versions.
Apache Vysper is an XMPP (Jabber) server library. Its XEP-0077 (In-Band Registration) implementation is missing an authentication check, allowing any authenticated user to compromise other accounts.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative. |
| Incorrect operator (CWE-480) in the FetchSnapshot RPC handler
in Apache Kafka from 2.8.0 before 4.2.2, and from 4.3.0 before 4.3.2
on all platforms allows an authenticated attacker with
CLUSTER_ACTION privilege to cause a denial of service
(controller process termination) via a crafted
FetchSnapshotRequest with an empty topics array or a topic
with no partitions.
Users are recommended to upgrade to version 4.2.2, 4.3.2, or
4.4.0, which fix this issue. Users on unsupported branches
(4.1.x and earlier) should upgrade to 4.2.2 or later. |
| A Kafka broker that authenticates clients with SASL/OAUTHBEARER using the bundled JWKS-backed validator always verifies the JWT signature, but two further checks are only performed when explicitly configured:
- The issuer (iss) claim is verified only when sasl.oauthbearer.expected.issuer is set. When it is unset, a validly-signed token carrying the expected audience is accepted regardless of which issuer minted it.
- An audience (aud) claim is required only when sasl.oauthbearer.expected.audience is set. When it is unset, a validly-signed token that omits the aud claim is accepted. (A token that carries an aud claim is
still rejected when no expected audience is configured.)
Both options default to unset and have been documented as optional (Importance LOW) since KIP-768 (3.1.0).
Impact:
The exposure is realizable mainly in deployments whose JWKS endpoint serves signing keys for more than one issuer (a multi-tenant identity provider, an aggregated/shared JWKS, or shared signing keys): a token
minted for a different issuer, or a token lacking an audience, may be accepted to authenticate — potentially as a higher-privileged principal. In a single-issuer deployment where the provider controls the iss
claim and issues audience-scoped tokens, exposure is limited. The signature trust anchor remains enforced in all cases. This is distinct from CVE-2026-33557 (acceptance of unsigned/unvalidated tokens); here the
signature is validated and only the issuer/audience checks are not enforced by default.
Mitigation (all affected versions, no upgrade required):
Set both sasl.oauthbearer.expected.issuer (to your provider's exact iss value) and sasl.oauthbearer.expected.audience (to the audience(s) your brokers expect), per listener. Brokers that set these perform
exact-match issuer/audience checks and are not affected. Both have been available since 3.1.0.
Resolution:
- From Apache Kafka 4.4.0: a broker configured with a JWKS endpoint fails to start unless both sasl.oauthbearer.expected.issuer and sasl.oauthbearer.expected.audience are set (secure by default). Deployments that
intentionally do not restrict the issuer and/or audience may opt out per axis with sasl.oauthbearer.allow.unverified.issuer=true and/or sasl.oauthbearer.allow.unverified.audience=true. |
| An authenticated Kafka principal with no authorization grants (not even ALTER_CONFIGS) can make a broker read a file or an environment variable from the broker host and return its contents. An IncrementalAlterConfigs (or AlterConfigs) request targeting a BROKER resource reaches the broker's configuration validation before any authorization check is applied to that path. Validation resolves configuration variables such as ${file:/path:key} or ${env:VAR} using a ConfigProvider named in the request, and this resolution bypasses the org.apache.kafka.automatic.config.providers allowlist that was added as the mitigation for CVE-2024-31141. An arbitrary ConfigProvider (for example FileConfigProvider or EnvVarConfigProvider) is therefore instantiated and the referenced file or environment variable is read, and a type-validation error returns the resolved content to the caller.
Impact:
On a cluster with an authorizer enabled, an authenticated principal with no authorization grants can read the contents of files accessible to the broker process, and the broker's environment variables, exposing credentials, keystores, or other secrets, defeating the CVE-2024-31141 allowlist. The read is bounded by the broker process's file permissions. The brokers and the cluster remain available; the issue is disclosure of file and environment- variable contents. Clusters with no authorizer configured are not affected in practice, because every principal already holds ALTER_CONFIGS there.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. As defense in depth, run brokers under a least-privileged operating-system account so that sensitive files are not readable by the broker process.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: broker configuration changes are authorized (ALTER_CONFIGS on the cluster) before the configuration is validated, and configuration- variable resolution enforces the config-providers allowlist. |
| Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component.
This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2.
For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume. |
| When a client sends a POST with Expect: 100-continue and the origin answers before reading the body, Apache Traffic Server parses the unread body left on the client connection as the next request. An attacker behind a front-end proxy that shares connections to Traffic Server can use this to smuggle requests past the front end and desynchronize responses for other users.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server allows request smuggling via HEAD requests that carry Content-Length or Transfer-Encoding.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| The Apache Airflow SSH provider hook disables SSH host-key verification by default: unless `host_key` is configured or `no_host_key_check` is explicitly set to false, it accepts any server key. This affects SSH and SFTP connections that rely on the default. An attacker in a machine-in-the-middle position between the worker and the SSH or SFTP server can impersonate the server and capture the credentials or data a task sends.
Users of apache-airflow-providers-ssh and apache-airflow-providers-sftp are recommended to upgrade to apache-airflow-providers-ssh 7.0.0 and apache-airflow-providers-sftp 7.0.0 or later. The deferrable SFTP code paths had the same default and are covered separately by CVE-2026-94135; apache-airflow-providers-sftp 7.0.0 fixes both. |
| Use of Cache Containing Sensitive Information vulnerability in Apache Camel Oauth component.
This issue affects Apache Camel: from 4.19.0 before 4.22.2.
OAuthClientCredentialsTokenResolver obtains OAuth 2.0 bearer tokens through the client credentials grant on behalf of the components that authenticate their outbound calls with a named OAuth profile, such as camel-openai, camel-langchain4j-agent, camel-huggingface, camel-docling, camel-a2a, camel-spring-ai-chat and the IBM watsonx components, and of applications that call the OAuthClientAuthenticationFactory SPI directly. It kept the tokens it obtained in a static cache shared by every resolver instance and every CamelContext in the JVM, and keyed that cache on the token endpoint and the client ID only, although the token request also carries the client secret and the requested scope. Two profiles that share a token endpoint and a client ID but request different scopes, or authenticate with different client secrets, therefore mapped to the same cache entry: the profile that resolved a token first populated the entry, and the other profile was then handed that token, with no token request made under its own configuration, for as long as the token remained valid. Token caching is enabled by default, and pointing several profiles at one identity provider client is an ordinary use of the profile support rather than an opt-in to an insecure setting. The outcome is an outbound request that carries a token issued for another profile's scope, which can grant broader authority than the calling profile was configured for, or reach a service the token was not issued for; with identity providers that derive a token's audience from the requested scope, a different scope can mean a token for a different service altogether. A profile configured with a different client secret was likewise served the token obtained with the other secret, without authenticating with its own. The profiles are configured by the deployment, which is trusted, so no untrusted input reaches the cache: the party that gains is the service that receives a token it was not meant to receive, which, if hostile or compromised, can replay that token within its scope. Reaching the issue requires a deployment that defines more than one profile sharing a token endpoint and client ID while differing in scope or client secret.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, disable token caching on every OAuth profile that shares a token endpoint and client ID with another profile, by setting camel.oauth.NAME.cache-tokens=false for a named profile or camel.oauth.cache-tokens=false for the default one, so that each resolution requests a token with that profile’s own scope and client secret, at the cost of a token request on every resolution. Alternatively, register a separate client at the identity provider for each profile that needs a different scope or client secret, so that no two such profiles share a client ID. |
| Improper Restriction of XML External Entity Reference vulnerability in Apache Camel Saxon component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
XQueryBuilder in camel-saxon, which evaluates expressions for the xquery language and the xquery component, built its default Saxon Configuration with parse options that set only a whitespace stripping rule, leaving the XML parser at its defaults, under which a DOCTYPE declaration is accepted and external entities are resolved. A message body of type String or byte[], or any body read as an InputStream, is first turned into a javax.xml.transform.Source by Camel's own XML type converters, which configure the parser against external entities, so those bodies were not affected. A body that was already a Source, however, was handed to Saxon unchanged, and when that Source still had to be parsed, as a stream-based Source does, Saxon parsed it with that Configuration, bypassing the protection applied to the other body types. Such a body arises, for example, after a route converts the message with convertBodyTo(Source.class), or when a component or processor earlier in the route sets the body to a stream-based Source. A DOCTYPE with an external subset, or an external entity, declared in that body was therefore resolved and expanded into the document the expression was evaluated against. An external sender whose XML reaches an XQuery expression or an xquery endpoint in that form could read files readable by the Camel process and cause the process to issue requests to hosts the document names. No non-default option is required, since the default Configuration is used whenever the route does not supply one of its own.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, as well as the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not evaluate XQuery over a message body that is already a javax.xml.transform.Source when that body carries XML from an untrusted sender, or set the configuration option of the xquery endpoint or language to a Saxon Configuration whose parse options refuse a DOCTYPE declaration and disable external entities and external DTD loading, which is what the fixed releases now apply by default. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2.
DoclingProducer builds the command line of the external docling tool and appends to it the custom arguments supplied in the CamelDoclingCustomArguments header, a list of strings whose flags the fix for CVE-2026-40047 restricted to an allowlist. That fix also introduced validatePathSafety to keep path-like argument values inside the intended directory, but the method only looked for relative traversal: it rejected a value containing a traversal sequence such as ../ and a value whose normalized form still held a .. element. It never checked whether a value was an absolute path, and an absolute path without traversal segments contains neither, so it passed unchanged. Every path-like value went through this check, whether it was a separate list element following its flag or was attached to the flag after an equals sign, so an absolute path was accepted in either form, for example as the directory given to the allowlisted --artifacts-path flag, which tells docling where to find its model artifacts. Such a value reached the docling command line as given, so a party able to choose the custom arguments could point the docling process at any directory the Camel process can access, outside the working directory that the check was meant to keep path values in, which is the outcome the CVE-2026-40047 fix set out to prevent. Only the CLI mode, which is the default, passes custom arguments to docling. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingCustomArguments header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the custom arguments. |
| When package management is enabled, Pulsar Functions, Sources and Sinks can be registered or updated from a package stored in the Pulsar Packages Management Service by supplying a package URL. The Pulsar Functions worker authorized these requests only against the namespace in which the component was being registered or updated. It did not check whether the requesting user was permitted to access packages in the namespace that the package URL refers to, and it retrieved the package from the broker using the worker's own credentials. The permission check of the Packages Management Service was therefore applied to the worker's identity instead of the requesting user's. Package URLs of transform functions supplied when registering or updating a sink were handled in the same way.
An authenticated user who is permitted to register or update functions, sources or sinks in any namespace of their own tenant could use this to obtain the contents of a package stored in a namespace of another tenant, without having the packages permission on that namespace. The impact is limited to disclosure of package contents, which may include application code, business logic or embedded credentials. The issue does not allow packages to be modified or deleted and does not affect availability.
This issue only affects deployments that have authentication and authorization enabled and in which package management has been enabled: the broker setting enablePackagesManagement and, in current releases, the functions worker setting functionsWorkerEnablePackageManagement. Both settings are disabled by default.
This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. |
