| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap out-of-bounds read flaw was found in libsoup. When parsing multipart HTTP messages, an integer type mismatch between the caller and soup_headers_parse() can cause the length parameter to be incorrectly truncated, leading to a heap buffer over-read. A remote attacker could use this flaw to crash an application using libsoup or potentially disclose heap memory contents. |
| A flaw was found in libsoup. An unsigned integer underflow in the soup_filter_input_stream_read_until() function causes a heap buffer over-read when parsing multipart HTTP responses. A malicious HTTP server can exploit this by sending a crafted multipart response, potentially causing the client application to crash or disclose sensitive heap memory. |
| A vulnerability was found in Comfast CF-N1-S 2.6.0.1. The affected element is the function sub_41AD7C of the file /cgi-bin/mbox-config?method=SET§ion=ntp_timezone of the component Web Management. The manipulation of the argument timestr/ntp_client_enabled results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an improper check for an array index boundary. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an integer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to disclose kernel memory due to an out-of-bounds read. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an integer underflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to obtain sensitive information due to an integer underflow in the IPv4 IP-options parser. |
| A vulnerability was identified in rexrainbow phaser3-rex-notes up to 1.80.17. This vulnerability affects the function SetValue of the file plugins/utils/object/SetValue.js of the component BehaviorTree Blackboard Data Interface. Such manipulation of the argument key leads to improperly controlled modification of object prototype attributes. The attack can be launched remotely. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: fix out-of-bounds read in xattr_verify()
The digest-length check in xattr_verify() mixes int and size_t:
if (xattr_len - sizeof(xattr_value->type) - hash_start >=
iint->ima_hash->length)
sizeof() yields size_t, so the usual arithmetic conversions promote
the whole left-hand side to unsigned 64-bit before the subtraction
runs. For a truncated xattr this underflows instead of going negative:
a 1-byte IMA_XATTR_DIGEST_NG xattr (xattr_len == 1, hash_start == 1)
turns "1 - 1 - 1" into SIZE_MAX, which is trivially >= ima_hash->length.
The check then passes and the following memcmp() reads
iint->ima_hash->length bytes starting past the end of the buffer
vfs_getxattr_alloc() allocated for it.
Nothing upstream clamps xattr_len back into a safe range first:
ima_get_hash_algo() only special-cases xattr_len < 2 to pick a default
algorithm, and evm_verifyxattr() returns INTEGRITY_UNKNOWN rather than
failing when no HMAC key is loaded, so a truncated security.ima value
reaches the length check as-is.
Rewrite the comparison so every operand stays a signed int and no
implicit conversion to size_t can occur. |
| A vulnerability was detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. This impacts the function strcpy of the file /goform/aspRemoteApConfTempSend of the component HTTP Request Handler. Performing a manipulation of the argument Profile results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reallocate update replies for mismatched IDs
ovs_flow_cmd_new() preallocates the optional reply skb before it takes
ovs_mutex and before it knows which existing flow will be updated.
That is normally fine because the skb is sized from the request flow
identifier. That identifier also becomes the inserted flow's identifier.
For updates, however, a request with a UFID may miss the UFID lookup and
then fall back to the flow key lookup. That lookup can legitimately find
an existing key-identified flow. UFIDs are optional and the flow key is
the primary identifier.
For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's
identifier, not the request identifier used for the preallocation. A short
request UFID can therefore leave too little room for the key identifier.
The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the
update path.
Once the update target has been resolved, reallocate the reply skb if the
matched flow needs a larger reply than the request identifier allowed. Do
this before replacing the actions so the request can still fail cleanly if
the rare extra allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - sanitize event type index when fetching event masks
The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK
ioctls is used to index the static counts array in evdev_get_mask_cnt()
and client evmasks array in evdev_get_mask().
While the event type is architecturally bounded by EV_CNT, speculative
execution may mispredict bounds checks and perform out-of-bounds loads.
Sanitize the event type index in evdev_get_mask_cnt() branchlessly using
array_index_mask_nospec(). This clamps the index to 0 for safe array
access and forces the returned count to 0 speculatively when the index
is out of bounds.
We do not need additional array_index_nospec() calls in evdev_get_mask()
because evdev_get_mask_cnt() speculatively forces the count (and
resulting xfer_size) to 0 for out-of-bounds types, preventing any
speculative memory access to client evmasks array. |
| A flaw was found in QEMU's virtio-blk device. The issue arises because the device does not properly validate the size of input descriptors before writing data. A malicious guest with high privileges could exploit this vulnerability by submitting a malformed virtio-blk SCSI request, leading to an out-of-bounds write in the host heap memory and a potential denial of service (DoS) for the QEMU process. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: reject frames without a transaction header
hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0]
before checking that the L2CAP SDU contains a transaction header. A
connected HIDP peer can send an empty basic-mode SDU and make both paths
use an uninitialized byte from skb tailroom.
KMSAN reports the use in hidp_session_run(), with the uninitialized value
originating in __alloc_skb() through vhci_write(). The control path
produces two reports and the interrupt path produces one.
The byte can also be controlled by a malformed lower-layer packet. If an
HCI ACL packet contains an L2CAP PDU with a declared zero-length payload
followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to
the declared PDU length before dispatch. The current HIDP path nevertheless
consumes the extra byte as HIDP_TRANS_HID_CONTROL |
HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this
change, the same packet is discarded and a subsequent feature report
request succeeds.
Pull the transaction header with skb_pull_data() and discard frames that
do not contain it. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
ev variable is userspace controlled via event->attr.config and used
as an array index after bounds checking, but without speculation
barriers.
Add the missing array_index_nospec() call to prevent speculative
execution. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: swp: Improve locking user experience
In the case of the first block being locked (or the few first blocks),
if the user want to fully unlock the device it has two possibilities:
- either it asks to unlock the entire device, and this works;
- or it asks to unlock just the block(s) that are currently locked,
which fails.
It fails because the conditions "can_be_top" and "can_be_bottom" are
true. Indeed, in this case, we unlock everything, so the TB bit does not
matter. However in the current implementation, use_top would be true (as
this is the favourite option) and lock_len, which in practice should be
reduced down to 0, is set to "nor->params->size - (ofs + len)" which is
a positive number. This is wrong.
An easy way is to simply add an extra condition. In the unlock() path,
if we can achieve the same result from both sides, it means we unlock
everything and lock_len must simply be 0. A comment is added to clarify
that logic. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate minimum PDU size for transform requests
The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.
On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.
Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix OOB reads in remote DPCD/I2C sideband reply parsers
drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw
message and then unconditionally does:
memcpy(bytes, &raw->msg[idx], num_bytes);
without checking that idx + num_bytes <= raw->curlen. raw->msg[] is
256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger
than the remaining payload, the memcpy reads past the received data
into whatever follows in raw->msg[].
drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted
with a /* TODO check */ comment since the code was introduced).
Fix both functions by using a single combined check
(idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8,
it is always >= 0, so this strictly subsumes the simpler idx > curlen
form and no separate step is needed.
[added missing fixes tag] |
