| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| filelock is a platform-independent file lock for Python. From 3.22.0 until 4.2.1, SoftFileLock can trust a forged process identifier in a marker that an attacker can modify but cannot remove, allowing an authorized contender such as another process of the holder's account or root to act as a confused deputy, remove the live marker, and admit another holder. This issue is fixed in version 4.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate cookie AUTH state before use
When cookie authentication is disabled, COOKIE_ECHO restores fixed-size
AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM
length, HMAC list, or CHUNKS list can then reach association consumers
with lengths or identifiers that were never validated against the local
backing arrays.
A forged RANDOM length can cause out-of-bounds reads during key-vector
construction. A forged HMAC identifier also caused a 32-byte write past
a zero-length AUTH chunk, providing a primitive for a local privilege
escalation chain.
Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie
trust boundary before copying them into the association. Reject invalid
types, malformed lengths, unsupported HMAC identifiers, HMAC lists
without SHA1, and forbidden chunk ids. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Disable EOP for TPA on all chips to prevent data corruption
EOP (End of frame padding) on the AGG ring may cause overlapping of
zero padding at the end of one segment with the next segment's data.
If Relaxed Ordering (RO) is enabled, the zero padding may overwrite
valid data in the next segment and corrupt the data. Older chips
(P5 and older) do not automatically disable RO when EOP is enabled.
On some ARM systems, data corruption was reported on 57508 (P5)
chips with RO enabled.
Always disable EOP on all chips on the AGG rings when TPA is enabled
to fix the data corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add a max slot check for SQ
The variable WQE mode must be validated against
the maximum slots supported by HW. The max supported
value is 64K. Adding a max and min check and fail if user
supplied value is more than the max supported and zero. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix zeropoint update where i_size > remote_i_size
Fix the update of the zero point[*] by netfs_release_folio() when there is
uncommitted data in the pagecache beyond the folio being released but the
on-server EOF is in this folio (ie. i_size > remote_i_size). The update
needs to limit zero_point to remote_i_size, not i_size as i_size is a local
phenomenon reflecting updates made locally to the pagecache, not stuff
written to the server. remote_i_size tracks the server's i_size.
[*] The zero point is the file position from which we can assume that the
server will just return zeros, so we can avoid generating reads.
Note that netfs_invalidate_folio() probably doesn't need fixing as
zero_point should be updated by setattr after truncation or fallocate.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0x1bbae 0x82864
write 0x3ef2e 0xf9c8 0x1bbae
write 0x67e05 0xcb5a 0x4e8f6
mapread 0x57781 0x85b6 0x7495f
copy_range 0x5d3d 0x10329 0x54fac 0x7495f
write 0x64710 0x1c2b 0x7495f
mapread 0x64000 0x1000 0x7495f
on cifs with the default cache option.
It shows read-gaps on folio 0x64 failing with a short read (ie. it hits
EOF) if the FMODE_READ check is commented out in netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest. |
| In Progress® Kendo® UI for jQuery versions starting with 2022.3.1109 and prior to 2026.3.1015, ToolBar ButtonGroup button URLs are concatenated into an unquoted href attribute after URL sanitization. An attacker who can control a button URL can supply an otherwise allowed HTTPS URL containing whitespace and additional attributes, including an event handler, and execute JavaScript in a user's browser when the affected button is interacted with. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery releases starting with v2020.1.114 and prior to 2026.3.1015, the Badge text method renders string values as raw HTML without encoding, including values supplied through text binding. An attacker who can modify data bound to a Badge can supply HTML containing event handlers that execute JavaScript in a user's browser when the Badge renders the value. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery versions starting with 2023.3.1010 and prior to 2026.3.1015, the FileManager component renders remotely supplied item names as HTML in its default drag hint even though the corresponding list items are encoded. An attacker who can control an item name can inject HTML containing event handlers that execute JavaScript in a user's browser when the user drags the affected item. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery versions starting with v2023.1.117 and prior to v2026.3.1015, the FileBrowser and ImageBrowser components render remotely supplied file and directory names as HTML without proper encoding. An attacker-controlled name containing script-related HTML can execute JavaScript in the user's browser, compromising the confidentiality and integrity of data accessible to the affected application. |
| In Progress® Kendo® UI for jQuery prior to v2026.3.1015, the Menu component constructs HTML attributes from bound dataSource fields by string concatenation without proper neutralization. An attacker with low privileges who can control these fields can inject JavaScript event-handler attributes that execute when a user interacts with the affected Menu, compromising the confidentiality and integrity of data accessible in the user's browser context. |
| In Progress® Kendo® UI for jQuery versions starting with 2012.2.710 and prior to 2026.3.1015, the Validator decodes validation messages from data-msg-* attributes and parses the resulting text as HTML. An attacker who can modify a validation message can cause HTML that was correctly escaped in the page attribute to become active markup, including event handlers, when the user triggers validation. Successful exploitation can execute JavaScript in a user's browser and compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery releases starting with R1 2020 and prior to 2026.3.1015, the ListBox default item template renders the bound dataTextField value as raw HTML without encoding. An attacker who can modify the bound data can supply HTML containing event handlers that execute JavaScript in a user's browser when the affected list item is rendered. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery prior to 2026.3.1015, the TabStrip, Menu, and PanelBar components insert data source imageUrl values into single-quoted image src attributes without proper escaping. An attacker who can modify an image URL can inject additional HTML attributes, including event handlers, and execute JavaScript in a user's browser when the affected component renders the image. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. The earliest affected version has not been confirmed. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery versions starting with 2019.2.514 and prior to 2026.3.1015, the PanelBar component inserts data source item URL values into a single-quoted href attribute without proper encoding. An attacker who can control an item URL can inject additional HTML attributes, including event handlers, and execute JavaScript in a user's browser when the affected item is interacted with. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. This issue is fixed in version 2026.3.1015. |
| In Progress® Kendo® UI for jQuery, in v2026.3.811 and earlier, the Scheduler Day, Timeline, Month, and Agenda views insert resource color values into quoted event wrapper attributes without proper encoding. An attacker who can control a resource color can inject additional HTML attributes, including event handlers, and execute JavaScript in a user's browser when the affected event is interacted with. Successful exploitation can compromise the confidentiality and integrity of data accessible to the affected application. The earliest affected version has not been confirmed. This issue is fixed in version 2026.3.1015. |
| A vulnerability was identified in makeplane plane up to 1.4.2. Impacted is an unknown function of the component API Endpoint. Such manipulation of the argument X-Forwarded-For leads to reliance on untrusted inputs in a security decision. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: use sk_msg_free_partial to fix partial send
sk_msg_free_partial() ensures consistency of the skmsg at every
iteration, without having to manually handle uncharges and offsets.
This simplifies the code, and fixes some bugs in skmsg accounting when
we don't send the full contents. |
| Reliance on untrusted inputs in a security decision in Microsoft PowerShell allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
