| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix dynamic id driver deregistration race
Only free the dynamic ids after having deregistered the driver and
removed the "new_id" attribute to avoid leaking any id added by a racing
write to the attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure
If devm_thermal_of_zone_register() fails, probe returns without
unregistering the IIO map array or disabling runtime PM.
Jump to err_map to release them. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: unregister DualPoint Stick input device on remove
alps_input_configured() allocates a second input device ("DualPoint
Stick") with input_allocate_device() and registers it, but the
alps_driver struct has no .remove handler and input2 is not tracked in
hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect)
only iterates hdev->inputs, so input2 is never unregistered and leaks
on every device removal.
Add a .remove handler that stops the device first (preventing URB
callbacks from touching input2 during teardown) and then unregisters
input2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: fix MMIO read buffer leak on probe failure
ena_device_init() initializes the MMIO read mechanism with
ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA
buffer for MMIO read responses.
The normal removal path releases this buffer through
ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails
after ena_device_init() succeeds, the error path destroys the admin
resources and eventually frees ena_dev without destroying the MMIO read
request, leaving the coherent DMA buffer allocated.
Call ena_com_mmio_reg_read_request_destroy() in the probe error path
before releasing the remaining device resources.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: close handle after create-context parsing failure
SMB2_open() accounts a successful CREATE response as a remote open before
parsing its create contexts. If smb2_parse_contexts() rejects malformed
context data, SMB2_open() returns without closing the handle, leaving the
server-side handle open and num_remote_opens elevated.
Close the handle after a post-CREATE context parsing failure so the error
path releases the remote resource and balances the open count. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: use finish_no_open() for non-regular inodes
An O_CREAT open can find an existing symlink or another non-regular
inode. cifs_atomic_open() calls finish_open() on it and attaches a
cifsFileInfo. Symlink inodes have no CIFS release operation, so the
dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also
prevents the VFS from following the symlink.
Track whether cifs_do_create() returned an open server handle. For
non-regular inodes, close the handle if present, remove the pending
open, and call finish_no_open() so the VFS can continue the lookup.
Do not set FMODE_CREATED unless a regular file was opened. For
O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's
-EFTYPE check.
Defer closing a legacy POSIX handle on a non-regular inode until
after inode lookup. This avoids closing it again if lookup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: close completed creates on compound wait errors
compound_send_recv() waits for responses in order. If a later wait is
interrupted, or if a later MID fails during response synchronization, an
earlier CREATE may already have opened a remote handle. The earlier mid
is then released without invoking handle_cancelled_mid(), leaving the
remote handle open because no FID was copied to the caller.
Mark completed earlier mids as cancelled when a compound wait or MID
synchronization aborts. Keep their response buffers attached while the
MIDs are synchronized, and transfer them only after synchronization of
the processed responses, so the release path can inspect successful
CREATE responses and queue SMB2_close() after a later failure. Account for
a remote open only after the close work is allocated and before it is
queued, since the caller has not yet updated num_remote_opens. Mark the
create+close compound used by smb2_unlink() so it is not closed again.
Non-CREATE responses and compounds that already include a close keep their
existing behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix smbd_connection leak on cifs_get_tcp_session() error
When an RDMA connection is successfully established via
smbd_get_connection() but cifs_get_tcp_session() later fails (e.g.
kthread_create() returns an error), the error path frees tcp_ses
without first destroying the smbd_connection.
Fix this by calling smbd_destroy() in the out_err cleanup path before
kfree(tcp_ses). smbd_destroy() safely handles the case where
smbd_conn is NULL, so it can be called unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmr: account multicast table and route memory
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and alternate interface names.
Unresolved MFC entries are still allocated from softIRQ with
GFP_ATOMIC and are not charged. They expire after 10 seconds and are
bounded by the socket receive queue; see commit 0079ad8e8dc3
("ipmr: remove hard code cache_resolve_queue_len limit"). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release all action references on NEWACTION failure
When a batched RTM_NEWACTION request replaces an existing action,
tcf_idr_check_alloc() takes a temporary reference on it. If a later
action fails to initialize, tcf_action_destroy() uses strict release
semantics to clean up the actions initialized so far. For an action
bound to a filter, the strict check returns -EPERM without dropping
the temporary reference.
This error also makes tcf_action_destroy() return before releasing
subsequent entries. Any new action initialized between the bound
action and the failing entry is leaked together with its reserved
IDR slot, preventing reuse of its index.
Use tcf_idr_release() to drop each reference held by the batch without
rejecting bound actions. This allows cleanup to continue through all
initialized entries and preserves the module reference release when
an action is destroyed. Explicit action deletion and flushing retain
their separate bind-count checks. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: flowlabel: cap duplicate leases per socket
ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every
successful GET. The recheck path for a compatible existing flowlabel
links another lease without applying any lease admission check. Repeated
GET requests for one shareable label can therefore grow a socket's lease
list without bound.
Reject a new unprivileged lease once the socket already holds
FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse
of a globally interned label, including the fl_intern() collision path,
is covered as well. New-label admission remains under the existing
mem_check() policy.
Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching
mem_check(). An unprivileged user must not bypass the cap by creating a
user namespace and a netns where they have CAP_NET_ADMIN, which would
still consume host memory.
Check the capability only when the socket reaches the limit, so
successful unprivileged GET requests below the cap do not generate a
capability audit. Do the admission check before updating linger and
expires so a rejected GET does not refresh the shared label, matching
the existing socket-list allocation failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl
amdkfd driver needs allocate buffer to return bo metadata to user space. The
buffer size is controlled by user currently. It is a potential security issue
that hostile value (e.g. 2 GiB) lets any render-group user trigger order-MAX
allocation/OOM in kernel context.
This patch first finds bo metadata size. If the size is smaller than user
provided value drive can safely allocate buffer in kernel space and copy to
user space buffer. If not, driver will let user know, not allocate and copy.
User will redo with new buffer in user space.
This patch lets driver decide buffer allocation size to avoid potential hostile
size from user space.
(cherry picked from commit f54ce9e8cbd3abe0eda3a285f54dc4f572fe589a) |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: fix cache shrink race with CPU hotplug
kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on
all online CPUs. Each callback moves objects belonging to the cache from
cpu_quarantine to the CPU's shrink_qlist, where they can later be freed
from task context.
kmem_cache_destroy() invokes the quarantine removal path while holding
cpus_read_lock(), but kmem_cache_shrink() does not. The latter can
therefore race with CPU offlining as follows:
kmem_cache_shrink() CPU hotplug
------------------- -----------
on_each_cpu()
CPU1 moves objects to
CPU1's shrink_qlist
on_each_cpu() returns
CPU1 goes offline
kasan_cpu_offline()
drains cpu_quarantine
leaves shrink_qlist untouched
for_each_online_cpu()
skips CPU1
The objects left on CPU1's shrink_qlist are not returned to the slab
allocator. This may prevent kmem_cache_shrink() from releasing slabs that
would otherwise become empty. If CPU1 remains offline, a later
kmem_cache_destroy() also skips the list and can report that the cache
still contains objects.
An intermittent occurrence was observed with a virtio-9p filesystem. The
mount and umount commands both returned 0, but the kernel logged the
following during the userspace-triggered teardown:
[ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown()
[ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376
[ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104
[ 2994.382591][ T111] p9_fcall_init+0x201/0x400
[ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700
[ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0
[ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50
[ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0
[ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360
[ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0
[ 2994.383910][ T111] vfs_statx+0xd7/0x170
[ 2994.384062][ T111] vfs_fstatat+0x45/0x80
[ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0
[ 2994.384386][ T111] do_syscall_64+0x115/0x6a0
[ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111
[ 2994.405655][ T111] Call Trace:
[ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0
[ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0
[ 2994.407210][ T111] v9fs_session_close+0x3c/0x260
[ 2994.407409][ T111] v9fs_kill_super+0x48/0x90
[ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160
[ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0
Thus, a successful umount left objects in the 9p fcall cache and prevented
the cache from being destroyed cleanly.
Per-CPU shrink_qlist storage exists for every possible CPU, and each list
is protected by its own raw spinlock. Iterate over possible CPUs so that
a list populated before its CPU went offline is drained as well.
for_each_possible_cpu() can do more work than for_each_online_cpu(), but
this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is
limited to cache shrink and cache destruction paths and does not affect
the normal allocation/free fast path. It adds one raw-spinlock-protected
scan of each possible CPU's shrink list. These lists are normally empty;
a non-empty list is traversed to remove objects belonging to the cache
being shrunk or destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wmi: fix resource leaks on probe failure
During driver initialization in asus_wmi_add(), various subsystems are
registered sequentially. However, the error path labels are out of order
relative to the registration sequence.
Specifically:
1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to
fail_custom_fan_curve. Because this label is placed below fail_sysfs,
it bypasses the cleanup calls for the input device and sysfs groups,
which were successfully registered before, leaking those resources.
2. If asus_screenpad_init() fails, the driver jumps to fail_screenpad.
Because fail_screenpad is placed below fail_backlight, it bypasses the
cleanup calls for backlight and rfkill, leaking those resources.
Fix these resource leaks by reordering the error path labels in
asus_wmi_add() to match the exact reverse order of the resource
allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: clean up color-change beacon data on errors
nl80211_color_change() calls nl80211_parse_beacon() for the beacon_next
template, which can allocate params.beacon_next.mbssid_ies and .rnr_ies.
A parsing failure returned directly instead of using the out: cleanup,
leaking any allocations completed before the error.
Allocate the nested attribute table before parsing beacon_next. Its
allocation failure can then return before beacon data exists, while a
later parsing failure uses out: to release the parsed data. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Fix FF device cleanup on init failure
hidpp_ff_init() creates the input force-feedback device with
input_ff_create(), then allocates the HID++ FF private data,
effect ID array, and workqueue.
If any of those allocations fail after input_ff_create() succeeds,
the function returns an error without destroying the FF device.
Add an unwind path that frees the private allocations made by
hidpp_ff_init() and calls input_ff_destroy() for failures after
input_ff_create() succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Return a delegation the client fails to record
When an NFS server grants a delegation in an OPEN reply,
nfs_inode_set_delegation() records it on the client. However, three
of its error flows return without sending DELEGRETURN.
A delegation can be relinquished only by DELEGRETURN (RFC 8881
Section 20.2.4), so dropping one silently leaves the server believing
the client still holds it. If the server happens to recall that
delegation, the client answers CB_RECALL with NFS4ERR_BADHANDLE
because it has no record of the stateid. The server revokes the
delegation and moves it onto its cl_revoked list, because the client
never sends the FREE_STATEID that would drain it. Every subsequent
SEQUENCE reply then carries SEQ4_STATUS_RECALLABLE_STATE_REVOKED,
and the client's state manager loops issuing TEST_STATEID across its
delegations without ever clearing the condition.
The window is easy to reach now that a server offers a write
delegation on any write OPEN: a delegation recalled for one opener
races a re-open that the server answers with a fresh write
delegation.
Instead of dropping it, hand the delegation back during these error
flows. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix request buffer leak in smb2_new_read_req()
smb2_new_read_req() allocates the request buffer with
smb2_plain_req_init() but only publishes it to the caller with
*buf = req at the very end of the function. Two error returns sit in
between:
rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server,
(void **) &req, total_len);
if (rc)
return rc;
if (server == NULL)
return -ECONNABORTED;
[...]
rdata->mr = smbd_register_mr(server->smbd_conn,
&rdata->subreq.io_iter,
true, need_invalidate);
if (!rdata->mr)
return -EAGAIN;
On either of them the buffer is neither released nor handed back, so
it is leaked. The caller cannot clean up after it: smb2_async_readv()
does 'goto out' on a non-zero return, which skips the
cifs_small_buf_release(buf) at async_readv_out, and buf has not been
assigned at that point in any case.
The write path has never had this problem. smb2_async_writev()
registers the memory region inline and jumps to its release label
instead of returning:
wdata->mr = smbd_register_mr(...);
if (!wdata->mr) {
rc = -EAGAIN;
goto async_writev_out;
}
Commit b7972092199f ("cifs: smbd: Retry on memory registration
failure") changed both sides from -ENOBUFS to -EAGAIN in a single
patch, which puts the two shapes next to each other.
Only the -EAGAIN return is reachable in practice, because
smb2_plain_req_init() calls smb2_reconnect() first and that already
fails with -EIO when server is NULL, before anything is allocated.
Both returns are given the same treatment here rather than leaving
one of them correct only by accident.
Because -EAGAIN is a replayable error, the failure also reaches the
retry block at the end of smb2_async_readv(), which marks the
subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be
retried rather than ending the I/O, and every attempt that reaches it
leaks another buffer. smb2_should_replay() short-circuits on
tcon->retry, so on a hard mount the attempt count is not bounded by
the retrans setting.
Only the asynchronous read path is affected. The synchronous
SMB2_read() caller passes rdata == NULL and the memory registration
block is guarded on rdata.
The memory registration failure path was pointed out by the Sashiko
AI reviewer while it was reviewing an unrelated patch to
smb2_async_readv(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix extent map leak in NOCOW direct I/O write
btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an
extent map reference that must be dropped on all exit paths.
For direct writes into a NOCOW range, btrfs_get_blocks_direct_write()
keeps using that extent map and asks btrfs_create_dio_extent() to
allocate the ordered extent. If that fails, for example because
btrfs_alloc_ordered_extent() fails, the function returns the error
without dropping the input extent map. The PREALLOC path avoided this by
dropping the input extent map before replacing it with the newly created
one.
Check the error from btrfs_create_dio_extent() before replacing the
map and drop the input extent map on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: reject duplicate CREDS_VALUE options
gssx_dec_option_array() walks the wire-supplied option array and, for
every entry whose name matches CREDS_VALUE, calls
gssx_dec_linux_creds() on the same struct svc_cred. That helper
unconditionally installs a fresh groups_alloc() result into
creds->cr_group_info without releasing whatever pointer was already
there:
for (i = 0; i < count; i++) {
... decode name ...
if (length == sizeof(CREDS_VALUE) &&
memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) {
err = gssx_dec_linux_creds(xdr, creds);
...
}
}
A reply that carries two CREDS_VALUE entries therefore overwrites
cr_group_info on the second iteration and orphans the group_info
allocated by the first call. The earlier free_creds path only
releases the last cr_group_info via free_svc_cred(), so the first
allocation's refcount stays at one and its kvmalloc-backed storage
is leaked. No in-tree caller of gssp_accept_sec_context_upcall()
expects more than one CREDS_VALUE per reply.
Fix by tracking whether a CREDS_VALUE option has already been
decoded and returning -EINVAL on any subsequent match, so the
free_creds path releases the single group_info that was installed. |
