| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.54.0, contain a Least Privilege Violation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privilege and Denial of Service. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare()
KUAP means kernel cannot touch user memory unless it explicitly is
enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning
to userspace just before RFI, kernel should restore the user AMR value
back.
Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare()
as the last architecture step before returning to userspace.
commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature")
therefore called kuap_user_restore() from that hook. But on PowerPC that
is too early. After irqentry_exit() / syscall_exit_to_user_mode() we
still run platform specific exit routines.
e.g. code snippets showing both exception handling and system call
handling as the callers of function arch_exit_to_user_mode_prepare()
which does kuap_user_restore(). The below path shows that calling
kuap_user_restore() is too early when called from
arch_exit_to_user_mode_prepare().
Exception handling in exceptions-64s.S
=======================================
bl CFUNC(do_page_fault)
..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault)
arch_interrupt_async_enter_prepare(regs);
state = irqentry_enter(regs);
instrumentation_begin();
irq_enter_rcu();
handler(regs);
nap_adjust_return(regs);
irq_exit_rcu();
instrumentation_end();
arch_interrupt_async_exit_prepare(regs);
irqentry_exit(regs, state); <<< too early
irqentry_exit_to_user_mode()
__exit_to_user_mode_prepare(regs, EXIT_TO_USER_MODE_WORK_IRQ);
arch_exit_to_user_mode_prepare(regs, ti_work); <<< too early
b interrupt_return_srr
.. bl CFUNC(interrupt_exit_user_prepare) <<< already calls kuap_user_restore
prep_irq_for_enabled_exit() retry can run kernel code with IRQs on. So
only when that routine is fully finished is when the user KUAP should be
fully restored which interrupt_exit_user_prepare() already takes care of
before returning.
Similarly for system call handling in interrupt_64.S
======================================================
bl CFUNC(system_call_exception)
.Lsyscall_exit:
addi r4,r1,STACK_INT_FRAME_REGS
li r5,0 /* !scv */
bl CFUNC(syscall_exit_prepare)
.. kuap_assert_locked();
syscall_exit_to_user_mode(regs); <<< too early
syscall_exit_to_user_mode_prepare(regs); <<< too early
kuap_user_restore(regs); <<< already calls
syscall_exit_prepare(), which can enable IRQs, replay a pending
interrupt, and only then rfi. Those functions already restore KUAP
immediately before rfi.
Note that if we restore the user AMR too early like in the current code
as shown from the code snippets above, then we get the following warning
when CONFIG_PPC_KUAP_DEBUG is enabled:
WARNING: arch/powerpc/include/asm/book3s/64/kup.h:293 at interrupt_exit_user_prepare+0x1a0/0x1c0
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected)
TRAP: 0700
LR: c00000000000d8d4 CTR: c0000000021fe500
MSR: <SF,EE,ME,IR,DR,RI,LE> CR: 44000804 XER: 20040000
interrupt_exit_user_prepare+0x1a0/0x1c0
interrupt_return_srr_user+0x8/0x12c |
| Incorrect default permission in Samsung Flow prior to version 4.9.22.4 allows local attackers to launch an arbitrary activity with Samsung Flow privileges on the connected device. |
| Improper input validation in CreditCardRetrieveActivity of Samsung Checkout prior to version 5.1.03.1 allows local attackers to launch an arbitrary activity with Samsung Checkout privileges. |
| obsidian-tc is a governed, agent-ready Model Context Protocol server for Obsidian vaults. Prior to 1.3.1, undefined readPaths and writePaths settings allow all paths, strictReadDefault does not protect direct requests, and the .obsidian, .git, and .trash control directories are excluded only during enumeration. An authenticated caller can directly read sensitive files such as .obsidian/plugins/*/data.json, potentially exposing plugin API keys, Obsidian Sync passwords, and other in-vault data. Version 1.3.1 fixes the vulnerability by denying the control directories by default and enforcing strictReadDefault on direct request paths. |
| When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. |
| Vulnerability due to incorrect permissions in TSplus Remote Access shared login scripts. The autostart1.tscr files, located in the shared themes directory, allow users without sufficient privileges to write to them. A local attacker with a valid session on the terminal or remote desktop server could modify these files to execute arbitrary commands within another user’s security context when that user logs in using the same theme or operating mode. Depending on the affected user’s privileges, exploitation could allow lateral movement between users or privilege escalation. |
| sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user. |
| An issue was discovered in disable_priv_mode in shell.c in GNU Bash through 5.0 patch 11. By default, if Bash is run with its effective UID not equal to its real UID, it will drop privileges by setting its effective UID to its real UID. However, it does so incorrectly. On Linux and other systems that support "saved UID" functionality, the saved UID is not dropped. An attacker with command execution in the shell can use "enable -f" for runtime loading of a new builtin, which can be a shared object that calls setuid() and therefore regains privileges. However, binaries running with an effective UID of 0 are unaffected. |
| Privilege context switching error in Microsoft Office SharePoint allows an authorized attacker to elevate privileges over a network. |
| FreeRDP from 2.0.0 before 3.32.0 contains an insecure permission vulnerability in winpr-makecert that creates unencrypted private keys without owner-only file modes. Local users on multi-user Unix hosts can read world-readable key files or open PFX files protected by the hard-coded default password to steal private keys. |
| JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From 4.5.7 until 4.5.11 and 4.6.4, the markdownviewer:trust and notebook:trust command-link handlers use tracker.currentWidget to resolve the current Markdown viewer or notebook when the user answers rather than retaining the document whose command button was clicked. If another document becomes current while the prompt is open and the user chooses Trust, JupyterLab marks the second document trusted while leaving the clicked document untrusted. Later command buttons in the incorrectly trusted document run without a prompt, and trusting a notebook marks all cells trusted, saves unsaved edits, and persists the server signature to disk. Applications that bundle JupyterLab, including affected Notebook and JupyterLite releases, inherit the behavior. This issue is fixed in versions 4.5.11 and 4.6.4. |
| A container privilege escalation flaw was found in certain Ansible Automation Platform images. This issue arises from the /etc/passwd file being created with group-writable permissions during the build process. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This vulnerability allows an attacker to add a new user with any arbitrary UID, including UID 0, gaining full root privileges within the container. |
| ZTE Z80 Ultra has an interface permission validation vulnerability. The callable functions provided by the system lack sufficient access control. An attacker can leverage these functions to read relevant information. |
| Insecure file permissions in the CodeCatalyst connection handler in AWS Toolkit for VS Code before 4.10.0 allowed local users to obtain CodeCatalyst bearer tokens via reading world-readable token cache files.
To mitigate this issue, users should upgrade to version 4.10.0 or later. |
| A vulnerability in the client update process of Cisco AnyConnect Secure Mobility Client Software for Windows and Cisco Secure Client Software for Windows could allow a low-privileged, authenticated, local attacker to elevate privileges to those of SYSTEM. The client update process is executed after a successful VPN connection is established.
This vulnerability exists because improper permissions are assigned to a temporary directory that is created during the update process. An attacker could exploit this vulnerability by abusing a specific function of the Windows installer process. A successful exploit could allow the attacker to execute code with SYSTEM privileges. |
| In Gradle before version 7.0, on Unix-like systems, the system temporary directory can be created with open permissions that allow multiple users to create and delete files within it. Gradle builds could be vulnerable to a local privilege escalation from an attacker quickly deleting and recreating files in the system temporary directory. This vulnerability impacted builds using precompiled script plugins written in Kotlin DSL and tests for Gradle plugins written using ProjectBuilder or TestKit. If you are on Windows or modern versions of macOS, you are not vulnerable. If you are on a Unix-like operating system with the "sticky" bit set on your system temporary directory, you are not vulnerable. The problem has been patched and released with Gradle 7.0. As a workaround, on Unix-like operating systems, ensure that the "sticky" bit is set. This only allows the original user (or root) to delete a file. If you are unable to change the permissions of the system temporary directory, you can move the Java temporary directory by setting the System Property `java.io.tmpdir`. The new path needs to limit permissions to the build user only. For additional details refer to the referenced GitHub Security Advisory. |
| pkexec, when used with --user nonpriv, allows local users to escape to the parent session via a crafted TIOCSTI ioctl call, which pushes characters to the terminal's input buffer. |
| Beginning in v1.4.1 and prior to v1.4.9, due to an incomplete fix for CVE-2021-24031, the Zstandard command-line utility created output files with default permissions and restricted those permissions immediately afterwards. Output files could therefore momentarily be readable or writable to unintended parties. |
| Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.0.0 through 6.3.5 allow a local authenticated user to read the mail server's data. The installer created the data, log, temp, database and event folders and the hMailServer.INI configuration file with the permissions inherited from the installation folder, by default under Program Files, which give the local Users group read access. Any user who can sign in to the computer could read every stored message, the logs, the built-in database with the accounts' password hashes whenever the service is stopped, and the configuration file, including the database password, which is sealed only with the machine's DPAPI key and can be unsealed by any local account; with an external database that password gives full control of it. The Linux AppImage of 6.3.0 through 6.3.5 likewise created its per-user data folders readable by other local users. |
