| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Reject oversized XDomain properties responses
tb_xdp_properties_request() allocates room for 45 data dwords in its
252-byte response buffer. The XDomain length field is six bits wide,
however, and a malicious peer can set it to 63. After the fixed response
fields are subtracted, the driver treats this as 48 data dwords.
Commit 322e93448d90 ("thunderbolt: Clamp XDomain response data copy to
allocation size") only bounds the copy against data_len. If data_len is
at least 48, memcpy() reads 192 bytes from the 180-byte res->data array,
causing a 12-byte heap out-of-bounds read. Commit 4db2bd2ed478
("thunderbolt: Limit XDomain response copy to actual frame size") limits
the earlier copy but does not constrain this header-derived length.
Reject response data lengths that exceed the allocated source buffer
before copying them into the assembled property block. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup
The sampling frequency tables store each frequency as an integer part and
a fractional part in micro units. num_sampling_freq_avail is initialized
to the number of flattened integer elements because read_avail() returns
the table as a flat array.
bmp280_write_sampling_frequency(), however, indexes the same table as a
two-dimensional array and uses num_sampling_freq_avail as the number of
rows. Convert the flattened element count back to the number of rows
before iterating over the table. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix create context out-of-bounds reads
smb2_parse_contexts() validates the complete create-context area but
does not limit each record to its Next field before dispatching it. A
malformed chain can therefore expose bytes beyond the current context to
a handler. The QFid handler also used a full response-structure cast
although it only reads DiskFileId.
The SMB2/SMB3 lease parsers made the same layout assumption: they read
LeaseState and LeaseFlags at canonical offsets rather than at
DataOffset. A valid non-canonical DataOffset could therefore yield
unrelated in-bounds data, while a short DataLength was still accepted.
Limit each context to its Next value, reject offsets before the context
header, and reject malformed chains. Bound the name range by the current
context and do not dispatch a known handler when DataLength is zero. Read
the QFid DiskFileId only when the context data covers that field. Parse the
lease context from DataOffset and require DataLength to match the v1 or v2
lease_context size used by ksmbd. A size mismatch skips lease parsing
without failing the open. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: require the MAC header to be present in __vlan_insert_inner_tag()
__vlan_insert_inner_tag() only guarantees head room via skb_cow_head(),
never that mac_len bytes of MAC header are present. Its ETH_HLEN
wrappers - __vlan_insert_tag() under skb_vlan_push(), and
vlan_insert_tag() under validate_xmit_vlan() on the generic transmit
path - therefore rewrite the first 16 bytes at skb->data: a 12-byte
memmove plus two 2-byte stores at +12 and +14. No caller supplies the
bound, while the pop helpers use skb_ensure_writable()/pskb_may_pull().
An IFF_TUN device has hard_header_len == 0, so packet_snd() accepts a
one-byte AF_PACKET/SOCK_RAW frame. The first vlan push only sets a
hwaccel tag; the next - clsact "action vlan push" or
bpf_skb_vlan_push() - enters the helper with skb->len still 1. The
head comes from skbuff_small_head without __GFP_ZERO, so each push
drags bytes from beyond skb->tail into the frame. After three the
one-byte send leaves as 13 bytes carrying 11 bytes of uninitialised
slab:
0000: 5a b3 62 12 80 88 ff ff 00 b3 62 12 81
`------------------------------'
only 0x5a was sent; the rest is slab, here the top 56 bits of a
linear-map address
Require the MAC header the helper rewrites to be present, so such a
frame is dropped rather than transmitted. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: drop RX packets with a short Ethernet header
handle_incoming_queue() pulls pull_to bytes into the head before
calling eth_type_trans(). pull_to is the length of the first RX slot,
capped at RX_COPY_THRESHOLD, and that length comes from the backend.
Nothing checks it against ETH_HLEN.
If the first slot is shorter than ETH_HLEN and more slots follow, the
head ends up shorter than an Ethernet header while skb->len is longer,
and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is
shorter than ETH_HLEN, eth_type_trans() reads the header past the end
of the data instead.
Pull at least ETH_HLEN, and drop the packet if that fails, which also
drops packets too short to hold an Ethernet header. This also checks
the return value of the pull, which was ignored. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject TKIP frames without a full MIC
libipw_michael_mic_verify() assumes that an skb contains an eight-byte
Michael MIC. A short TKIP frame makes the unsigned payload length wrap,
causing michael_mic() to read past the skb.
Check that the MIC is present before verifying it, and use the existing
MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs()
In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is
insufficient. It allows iteration to continue even if the remaining
src_size is too small to contain a complete smb2_ea_info structure.
Consequently, reads of ea_name_length and ea_value_length can occur
out-of-bounds.
Fix this by ensuring src_size >= sizeof(*src) before attempting to read
any structure fields. Additionally, reject any next_entry_offset that is
smaller than sizeof(*src) or that would advance the pointer beyond the
available buffer.
Note that for calls where the server returns a malformed EA list, the
error returned to userspace changes from -ENODATA (getxattr) or
-ERANGE (listxattr) to -EIO. This correctly signals a server protocol
error rather than misleadingly indicating "attribute not present" or
"output buffer too small". |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOB read in smb3_enum_snapshots()
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check is ineffective as it
only reduces ret_data_len.
Fix this by rejecting replies shorter than
sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set
to the 12-byte struct size rather than the 16-byte
MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes
is exactly what copy_to_user() attempts to read. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISC-V: store available counter mask as bitmap
The available-counter mask was a single unsigned long, but iteration
uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object.
Filling with an unsigned-long bit at index 32 and above is also wrong.
Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word
into CFG_MATCH when checking events, when allocating an index, and when
stopping all counters. Set the counter base to i times BITS_PER_LONG.
Share the CFG_MATCH ecall through a small helper so the 32-bit argument
split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits
above XLEN set, so the first word alone is not enough.
[pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whose vendor_id matches the
host, triggering out-of-bounds heap reads (KASAN-detectable, and able to
mis-select a command or panic).
Add a central guard in qla2x00_process_vendor_specific() so the selector
is always in bounds, restrict the early vendor_cmd[0] read in
qla24xx_bsg_request() to sufficiently long vendor messages, and add
request_len checks to the sub-handlers that read further:
qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(),
qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(),
qla2x00_update_optrom(), qlafx00_mgmt_cmd() and
qla28xx_validate_flash_image(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: phy: check length before parsing PHY status IE
Hardware might report PHY status IE with unexpected length, and parser
might access out of range. Check the length ahead. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate TX_CMD response layout
TX_CMD parsing uses frame_count to walk status entries and then
read the trailing SCD SSN. Make the minimum-length check follow
that exact runtime layout calculation before parsing the payload.
For new TX API, reject TX_CMD responses with frame_count != 1 and
warn/return in the aggregation handler to document that aggregated
accounting is expected via BA notifications. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: add a check on the tid coming from the firmware
ba_notif->tid is a firmware-controlled u8 that is used directly
as an array index into tid_data[] without any validation. Add a
bounds check against IWL_MAX_TID_COUNT before dereferencing the
array. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
The changes introduced to handle single power domain platforms have
swapped the info pointer increment from num_pd_vregs to num_pds, which
would shift the info pointer past the end of the array for pronto-v3,
which does not list power domain regulators in vregs.
This showed up as a difference between GCC- and LLVM-compiled kernels
on SDM632 devices, where only with LLVM one would get the
"regulator request with no identifier" error, because the out-of-bounds
memory ended up being zeroed. Fix by skipping the increment when there
are more power domains than regulators. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate string descriptors
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buffer.
Allocate a zeroed bLength-sized buffer and copy only the UTF-16
payload. This preserves the raw buffer size consumed by the RPMB device-ID
ABI while avoiding the overread. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event()
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user()
ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC
login response with
user->passkey_sz = resp->hash_sz;
user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP);
if (user->passkey)
memcpy(user->passkey, resp->hash, resp->hash_sz);
resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is
only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login
response can set hash_sz well beyond that (up to 65535), so the memcpy()
reads past the end of the response object. ipc_validate_msg() does not
bound hash_sz, so reject any response whose hash_sz exceeds the on-stack
hash[] buffer before allocating and copying.
[ 2030.238706] BUG: KASAN: slab-out-of-bounds in ksmbd_alloc_user+0x278/0x680
[ 2030.240549] Read of size 65535 at addr ffff888121bb6680 by task kworker/4:1/18611
[ 2030.242296]
[ 2030.242710] CPU: 4 UID: 0 PID: 18611 Comm: kworker/4:1 Not tainted 7.1.0-next-20260623-virtme #96 PREEMPT(lazy)
[ 2030.242732] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 2030.242743] Workqueue: ksmbd-io handle_ksmbd_work
[ 2030.242763] Call Trace:
[ 2030.242769] <TASK>
[ 2030.242776] dump_stack_lvl+0xa2/0xd0
[ 2030.242794] print_address_description+0x77/0x200
[ 2030.242815] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242831] print_report+0x58/0x70
[ 2030.242848] kasan_report+0x117/0x150
[ 2030.242869] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242888] kasan_check_range+0x3c7/0x3f0
[ 2030.242908] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242925] __asan_memcpy+0x29/0x70
[ 2030.242942] ksmbd_alloc_user+0x278/0x680
[ 2030.242960] ksmbd_login_user+0xc3/0x120
[ 2030.242978] ntlm_authenticate+0x5e6/0x1b00
[ 2030.243017] ? __pfx_ntlm_authenticate+0x10/0x10
[ 2030.243035] ? ksmbd_session_lookup+0x188/0x1d0
[ 2030.243054] ? __pfx_ksmbd_session_lookup+0x10/0x10
[ 2030.243090] ? __sanitizer_cov_trace_switch+0x7b/0x140
[ 2030.243108] smb2_sess_setup+0x1e4a/0x27b0
[ 2030.243126] ? copy_from_kernel_nofault+0x199/0x300
[ 2030.243156] ? __pfx_smb2_sess_setup+0x10/0x10
[ 2030.243173] ? get_smb2_cmd_val+0xe3/0x1c0
[ 2030.243208] handle_ksmbd_work+0x954/0x1280
[ 2030.243230] ? __pfx_handle_ksmbd_work+0x10/0x10
[ 2030.243249] ? process_scheduled_works+0xa07/0x1490
[ 2030.243270] ? process_scheduled_works+0xa07/0x1490
[ 2030.243291] process_scheduled_works+0xa70/0x1490
[ 2030.243320] ? __pfx_process_scheduled_works+0x10/0x10
[ 2030.243340] ? do_raw_spin_lock+0x130/0x300
[ 2030.243358] ? lock_is_held_type+0x7b/0x110
[ 2030.243388] worker_thread+0x932/0xe20
[ 2030.243415] kthread+0x38a/0x470
[ 2030.243431] ? __pfx_worker_thread+0x10/0x10
[ 2030.243451] ? __pfx_kthread+0x10/0x10
[ 2030.243467] ret_from_fork+0x484/0x910
[ 2030.243485] ? __pfx_ret_from_fork+0x10/0x10
[ 2030.243501] ? __switch_to+0xc77/0x12c0
[ 2030.243523] ? __pfx_kthread+0x10/0x10
[ 2030.243540] ret_from_fork_asm+0x1a/0x30
[ 2030.243564] </TASK>
[ 2030.243570]
[ 2030.290164] Allocated by task 19279:
[ 2030.290911] kasan_save_track+0x3e/0x80
[ 2030.292179] __kasan_kmalloc+0x72/0x90
[ 2030.293217] __kvmalloc_node_noprof+0x3ff/0x6b0
[ 2030.294467] handle_generic_event+0x59b/0x750
[ 2030.295345] genl_family_rcv_msg_doit+0x238/0x340
[ 2030.296553] genl_rcv_msg+0x606/0x7b0
[ 2030.297129] netlink_rcv_skb+0x22b/0x4a0
[ 2030.298500] genl_rcv+0x2d/0x40
[ 2030.299273] netlink_unicast+0x7ba/0x930
[ 2030.300019] netlink_sendmsg+0x8c3/0xb00
[ 2030.301073] __sock_sendmsg+0xec/0x140
[ 2030.301579] __sys_sendto+0x357/0x470
[ 2030.302255] __x64_sys_sendto+0xe3/0x100
[ 2030.303425] do_syscall_64+0x135/0x460
[ 2030.304763] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2030.305594]
[ 2030.305819] The buggy address belongs to the object at ffff888121bb6640
[ 2030.305819] which belongs to the cache kmalloc-192 of size 192
[ 2030.309595] The buggy address
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size
smb_check_perm_dacl() validates that the DACL fits inside the NT
security descriptor, but then bounds its two ACE walks by the
remaining NTSD length (acl_size) rather than the DACL's declared
size (pdacl_size).
When pdacl->size is smaller than the trailing NTSD buffer, bytes
after the declared DACL boundary - still inside the stored security
descriptor - are parsed as ACEs during access checks. A crafted
DACL can place an access-granting ACE beyond pdacl->size, and the
current code accepts it during SMB2_CREATE access validation, while
parse_dacl() and smb_inherit_dacl() stop at pdacl_size.
Bound both ACE walks by pdacl_size to match the DACL boundary
semantics used elsewhere in the server.
Validation:
- semantic KUnit harness shows the post-boundary ACE is selected
before the fix and rejected (EACCES) after it
- linux master (7.2-rc6), x86_64 |
| In the Linux kernel, the following vulnerability has been resolved:
net: qlcnic: validate unified ROM sections before loading
The unified ROM parser reads directory, product, and data-descriptor fields
from the firmware file. Existing validation forms table and data ends with
unchecked additions and multiplications. Malformed values can wrap before
they are compared with the firmware size. The parser also dereferences
typed pointers at firmware-controlled offsets.
Valid descriptor extents alone are insufficient for the consumers. The
loader reads a fixed-size bootloader regardless of its declared size, the
version parser assumes a 17-byte tail, and a partial final firmware word is
read as a full u64. A truncated image can therefore make the driver read
beyond the firmware allocation during validation or loading.
Replace the pointer-returning parser with bounded range helpers. Validate
table entry sizes, descriptor indices, section ranges, the fixed
bootloader load length, and the version tail before exposing any section.
Read all file fields with unaligned little-endian accessors and assemble a
partial final word from only the bytes that remain. Apply the same range
checks to the legacy image before reading its fixed fields. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound num_export_targets array for mds info v2/v3
ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from
each per-mds info record and advances the decode cursor by
num_export_targets * sizeof(u32) without first checking that many bytes
remain. The only upper-bound check that catches a runaway cursor
(*p > info_end) is gated on info_v >= 4, because info_end is left NULL
for info_v 2 and 3. When the monitor sends an MDS map whose per-mds
info version is 2 or 3 with an oversized num_export_targets, the cursor
moves past the message front buffer and the later export-targets loop
calls the unchecked ceph_decode_32() on out-of-bounds memory.
A kernel client processes CEPH_MSG_MDS_MAP from its monitor session
(net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to
ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and
calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an
on-path attacker on an unsigned/unencrypted messenger session, can
therefore drive an out-of-bounds read in the client kernel; on x86_64
with KASAN it is reported as a slab-out-of-bounds read in
ceph_mdsmap_decode(). The decoded values land in the internal
info->export_targets[] array, so the consequence is a kernel
out-of-bounds read, not an information leak to the attacker.
Impact: a malicious or compromised Ceph monitor sending an MDS map with
a per-mds info version of 2 or 3 and an oversized num_export_targets
field triggers an out-of-bounds read in the CephFS client kernel.
Add a ceph_decode_need() for the export-targets array before advancing
the cursor, so the bound is enforced for every info_v >= 2, not only
info_v >= 4. This mirrors the count-then-need idiom already used for
m_data_pg_pools later in the same function.
Compute the export-targets byte count with size_mul() and reuse that
checked length when advancing the cursor, so the attacker-controlled
num_export_targets multiplication fails closed on overflow rather than
relying on the later kcalloc() guard. |
