| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Calling Verify with a VerifyOptions.KeyUsages that contains ExtKeyUsageAny unintentionally disabledpolicy validation. This only affected certificate chains which contain policy graphs, which are rather uncommon. |
| An insufficient certificate validation issue in the Palo Alto Networks GlobalProtect™ app enables attackers to connect the GlobalProtect app to arbitrary servers. This can enable a local non-administrative operating system user or an attacker on the same subnet to install malicious root certificates on the endpoint and subsequently install malicious software signed by the malicious root certificates on that endpoint. |
| An issue was discovered on Alecto IVM-100 2019-11-12 devices. The device uses a custom UDP protocol to start and control video and audio services. The protocol has been partially reverse engineered. Based upon the reverse engineering, no password or username is ever transferred over this protocol. Thus, one can set up the camera connection feed with only the encoded UID. It is possible to set up sessions with the camera over the Internet by using the encoded UID and the custom UDP protocol, because authentication happens at the client side. |
| PaperCut Print Deploy is an optional component that integrates with PaperCut NG/MF which simplifies printer deployment and management. When the component is deployed to an environment, the customer has an option to configure the system to use a self-signed certificate. If the customer does not fully configure the system to leverage the trust database on the clients, it opens up the communication between clients and the server to man-in-the-middle attacks.
It was discovered that certain parts of the documentation related to the configuration of SSL in Print Deploy were lacking, which could potentially contribute to a misconfiguration of the Print Deploy client installation. PaperCut strongly recommends to use valid certificates to secure installations and to follow the updated documentation to ensure the correct SSL configuration. Those who use private CAs and/or self-signed certificates should make sure to copy their Certification Authority certificate, or their self signed certificate if using only one, to the trust store of their operating system and to the Java key store |
| When the Amazon Redshift Python Connector is configured with the BrowserAzureOAuth2CredentialsProvider plugin, the driver skips the SSL certificate validation step for the Identity Provider. An insecure connection could allow an actor to intercept the token exchange process and retrieve an access token.
This issue has been addressed in driver version 2.1.7. Users should upgrade to address this issue and ensure any forked or derivative code is patched to incorporate the new fixes. |
| A firmware downgrade vulnerability exists in the OTA Update functionality of GL-Inet GL-AXT1800 4.7.0. A specially crafted .tar file can lead to a firmware downgrade. An attacker can perform a man-in-the-middle attack to trigger this vulnerability. |
| A vulnerability was reported in the Lenovo Scanner pro application during an internal security assessment that, under certain circumstances, could allow an attacker on the same logical network to disclose sensitive user files from the application. |
| This vulnerability affects NeuVector deployments only when the Report anonymous cluster data option is enabled. When this option is enabled, NeuVector sends anonymous telemetry data to the telemetry server.
In affected versions, NeuVector does not enforce TLS
certificate verification when transmitting anonymous cluster data to the
telemetry server. As a result, the communication channel is susceptible
to man-in-the-middle (MITM) attacks, where an attacker could intercept
or modify the transmitted data. Additionally, NeuVector loads the
response of the telemetry server is loaded into memory without size
limitation, which makes it vulnerable to a Denial of Service(DoS)
attack |
| go-witness and witness are Go modules for generating attestations. In go-witness versions 0.8.6 and earlier and witness versions 0.9.2 and earlier the AWS attestor improperly verifies AWS EC2 instance identity documents. Verification can incorrectly succeed when a signature is not present or is empty, and when RSA signature verification fails. The attestor also embeds a single legacy global AWS public certificate and does not account for newer region specific certificates issued in 2024, making detection of forged documents difficult without additional trusted region data. An attacker able to supply or intercept instance identity document data (such as through Instance Metadata Service impersonation) can cause a forged identity document to be accepted, leading to incorrect trust decisions based on the attestation. This is fixed in go-witness 0.9.1 and witness 0.10.1. As a workaround, manually verify the included identity document, signature, and public key with standard tools (for example openssl) following AWS’s verification guidance, or disable use of the AWS attestor until upgraded. |
| An issue was discovered in Samsung eMMC with KLMAG2GE4A and KLM8G1WEMB firmware. Code bypass through Electromagnetic Fault Injection allows an attacker to successfully authenticate and write to the RPMB (Replay Protected Memory Block) area without possessing secret information. |
| Improper Certificate Validation (CWE-295) in the Controller 7000 OneLink implementation could allow an unprivileged attacker to perform a limited denial of service or perform privileged overrides during the initial configuration of the Controller, there is no risk for Controllers once they are connected.
This issue affects Controller 7000:
9.30 prior to vCR9.30.250624a (distributed in 9.30.1871 (MR1)). |
| An improper validation vulnerability was reported in the firmware update mechanism of LADM and LDCC that could allow a local attacker to escalate privileges. |
| Akka.NET is a .NET port of the Akka project from the Scala / Java community. In all versions of Akka.Remote from v1.2.0 to v1.5.51, TLS could be enabled via our `akka.remote.dot-netty.tcp` transport and this would correctly enforce private key validation on the server-side of inbound connections. Akka.Remote, however, never asked the outbound-connecting client to present ITS certificate - therefore it's possible for untrusted parties to connect to a private key'd Akka.NET cluster and begin communicating with it without any certificate. The issue here is that for certificate-based authentication to work properly, ensuring that all members of the Akka.Remote network are secured with the same private key, Akka.Remote needed to implement mutual TLS. This was not the case before Akka.NET v1.5.52. Those who run Akka.NET inside a private network that they fully control or who were never using TLS in the first place are now affected by the bug. However, those who use TLS to secure their networks must upgrade to Akka.NET V1.5.52 or later. One patch forces "fail fast" semantics if TLS is enabled but the private key is missing or invalid. Previous versions would only check that once connection attempts occurred. The second patch, a critical fix, enforces mutual TLS (mTLS) by default, so both parties must be keyed using the same certificate. As a workaround, avoid exposing the application publicly to avoid the vulnerability having a practical impact on one's application. However, upgrading to version 1.5.52 is still recommended by the maintainers. |
| An issue was discovered on certain Nuki Home Solutions devices. Lack of certificate validation on HTTP communications allows attackers to intercept and tamper data. This affects Nuki Smart Lock 3.0 before 3.3.5, Nuki Bridge v1 before 1.22.0 and Nuki Bridge v2 before 2.13.2. |
| Improper certificate validation in Logstash's TCP output could lead to a man-in-the-middle (MitM) attack in “client” mode, as hostname verification in TCP output was not being performed when the ssl_verification_mode => full was set. |
| MicroWorld eScan AV's update mechanism failed to ensure authenticity and integrity of updates: update packages were delivered and accepted without robust cryptographic verification. As a result, an on-path attacker could perform a man-in-the-middle (MitM) attack and substitute malicious update payloads for legitimate ones. The eScan AV client accepted these substituted packages and executed or loaded their components (including sideloaded DLLs and Java/installer payloads), enabling remote code execution on affected systems. MicroWorld eScan confirmed remediation of the update mechanism on 2023-07-31 but versioning details are unavailable. NOTE: MicroWorld eScan disputes the characterization in third-party reports, stating the issue relates to 2018–2019 and that controls were implemented then. |
| Collabora Online is a collaborative online office suite based on LibreOffice. In affected versions of Collabora Online, https connections from coolwsd to other hosts may incompletely verify the remote host's certificate's against the full chain of trust. This vulnerability is fixed in Collabora Online 24.04.4.3, 23.05.14.1, and 22.05.23.1. |
| Altair is a GraphQL client for all platforms. Prior to version 8.0.5, Altair GraphQL Client's desktop app does not validate HTTPS certificates allowing a man-in-the-middle to intercept all requests. Any Altair users on untrusted networks (eg. public wifi, malicious DNS servers) may have all GraphQL request and response headers and bodies fully compromised including authorization tokens. The attack also allows obtaining full access to any signed-in Altair GraphQL Cloud account and replacing payment checkout pages with a malicious website. Version 8.0.5 fixes the issue. |
| A vulnerability has been identified in COMOS V10.6 (All versions < V10.6.1), COMOS V10.6 (All versions < V10.6.1), JT Bi-Directional Translator for STEP (All versions), NX V2412 (All versions < V2412.8900 with Cloud Entitlement (bundled as NX X)), NX V2506 (All versions < V2506.6000 with Cloud Entitlement (bundled as NX X)), Simcenter 3D (All versions < V2506.6000 with Cloud Entitlement (bundled as Simcenter X Mechanical)), Simcenter Femap (All versions < V2506.0002 with Cloud Entitlement (bundled as Simcenter X Mechanical)), Simcenter Studio (All versions < V2506.0001), Simcenter System Architect (All versions < V2506.0001), Tecnomatix Plant Simulation (All versions < V2504.0007). The SALT SDK is missing server certificate validation while establishing TLS connections to the authorization server. This could allow an attacker to perform a man-in-the-middle attack. |
| Multiple MFPs provided by Brother Industries, Ltd. does not properly validate server certificates, which may allow a man-in-the-middle attacker to replace the set of root certificates used by the product with a set of arbitrary certificates. |
