| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do proper folio cleanup when run_delalloc_nocow() failed
[BUG]
With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash
with the following VM_BUG_ON_FOLIO():
BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28
BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28
page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664
aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774"
flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff)
page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio))
------------[ cut here ]------------
kernel BUG at mm/page-writeback.c:2992!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : folio_clear_dirty_for_io+0x128/0x258
lr : folio_clear_dirty_for_io+0x128/0x258
Call trace:
folio_clear_dirty_for_io+0x128/0x258
btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs]
__process_folios_contig+0x154/0x268 [btrfs]
extent_clear_unlock_delalloc+0x5c/0x80 [btrfs]
run_delalloc_nocow+0x5f8/0x760 [btrfs]
btrfs_run_delalloc_range+0xa8/0x220 [btrfs]
writepage_delalloc+0x230/0x4c8 [btrfs]
extent_writepage+0xb8/0x358 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x178/0x3a8 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
The first two lines of extra debug messages show the problem is caused
by the error handling of run_delalloc_nocow().
E.g. we have the following dirtied range (4K blocksize 4K page size):
0 16K 32K
|//////////////////////////////////////|
| Pre-allocated |
And the range [0, 16K) has a preallocated extent.
- Enter run_delalloc_nocow() for range [0, 16K)
Which found range [0, 16K) is preallocated, can do the proper NOCOW
write.
- Enter fallback_to_fow() for range [16K, 32K)
Since the range [16K, 32K) is not backed by preallocated extent, we
have to go COW.
- cow_file_range() failed for range [16K, 32K)
So cow_file_range() will do the clean up by clearing folio dirty,
unlock the folios.
Now the folios in range [16K, 32K) is unlocked.
- Enter extent_clear_unlock_delalloc() from run_delalloc_nocow()
Which is called with PAGE_START_WRITEBACK to start page writeback.
But folios can only be marked writeback when it's properly locked,
thus this triggered the VM_BUG_ON_FOLIO().
Furthermore there is another hidden but common bug that
run_delalloc_nocow() is not clearing the folio dirty flags in its error
handling path.
This is the common bug shared between run_delalloc_nocow() and
cow_file_range().
[FIX]
- Clear folio dirty for range [@start, @cur_offset)
Introduce a helper, cleanup_dirty_folios(), which
will find and lock the folio in the range, clear the dirty flag and
start/end the writeback, with the extra handling for the
@locked_folio.
- Introduce a helper to clear folio dirty, start and end writeback
- Introduce a helper to record the last failed COW range end
This is to trace which range we should skip, to avoid double
unlocking.
- Skip the failed COW range for the e
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Remove direct link to net_device
Do not manage a per device direct link to net_device. Rely
on associated ib_devices net_device management, not doubling
the effort locally. A badly managed local link to net_device
was causing a 'KASAN: slab-use-after-free' exception during
siw_query_port() call. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Handle mailbox timeouts in lpfc_get_sfp_info
The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and the
routine unconditionally frees submitted mailbox commands regardless of
return status. The issue is that for MBX_TIMEOUT cases, when firmware
returns SFP information at a later time, that same mailbox memory region
references previously freed memory in its cmpl routine.
Fix by adding checks for the MBX_TIMEOUT return code. During mailbox
resource cleanup, check the mbox flag to make sure that the wait did not
timeout. If the MBOX_WAKE flag is not set, then do not free the resources
because it will be freed when firmware completes the mailbox at a later
time in its cmpl routine.
Also, increase the timeout from 30 to 60 seconds to accommodate boot
scripts requiring longer timeouts. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Account for stopped queues when reading NIC stats
We now account for the fact that the NIC might send us stats for a
subset of queues. Without this change, gve_get_ethtool_stats might make
an invalid access on the priv->stats_report->stats array. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Take return from set_memory_ro() into account with bpf_prog_lock_ro()
set_memory_ro() can fail, leaving memory unprotected.
Check its return and take it into account as an error. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Take return from set_memory_rox() into account with bpf_jit_binary_lock_ro()
set_memory_rox() can fail, leaving memory unprotected.
Check return and bail out when bpf_jit_binary_lock_ro() returns
an error. |
| The Envira Gallery WordPress plugin before 1.16.2 does not verify that a user holds the capability WordPress reserves for installing Envira Gallery WordPress plugin before 1.16.2 code before processing its setup-wizard Envira Gallery WordPress plugin before 1.16.2-installation request, and does not restrict the installation to its own curated list, allowing a Multisite subsite Administrator to install an arbitrary WordPress.org-published Envira Gallery WordPress plugin before 1.16.2 into the network-shared Envira Gallery WordPress plugin before 1.16.2 directory, a privilege Multisite reserves for the network Super Admin. |
| A flaw was found in pki-core. The v2 REST ACL filter selects a tie-breaking permission for colliding literal and wildcard ACL keys using lexicographic string comparison rather than specificity, causing a wildcard-mapped permission to override a more specific literal-mapped permission when both match. In the CA's profile-management REST API this allows a request to POST /v2/profiles/raw -- intended to require Administrator-level profiles.create permission -- to instead be authorized under the lower-privileged profiles.approve permission held by the default Certificate Manager Agents group. The highest threat from this vulnerability is to confidentiality and integrity of the certificate authority's issuance policy. |
| The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not sanitise sort parameters before using them in a SQL ORDER BY clause, allowing unauthenticated attackers to perform SQL injection attacks. |
| The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not properly validate a parameter before using it as a column identifier in a SQL query, allowing unauthenticated attackers to perform SQL injection attacks. |
| The Translate WordPress with Weglot 2.0 WordPress plugin before 6.4.3 does not escape the URLs it re-inserts into a page when rewriting links for a translated language, and reverses the encoding that was applied to them beforehand, allowing unauthenticated users to store a payload which executes in the browser of anyone viewing the page in a translated language. |
| The Jane Menu WordPress plugin before 1.5.1 does not have any capability or nonce checks on one of its form handlers, which is reachable by unauthenticated users, allowing them to bind any published page to a remote document of their choosing. The plugin then fetches that document and outputs its head and body into the page without escaping, so an unauthenticated attacker can run arbitrary JavaScript in the browser of any visitor to that page, including an administrator. |
| The Formidable Forms WordPress plugin before 7.0 does not verify the identity of the caller before recording the timestamp it uses to rate limit payment gateway verification requests, allowing unauthenticated attackers to consume the daily allowance and cause legitimate verification attempts to be refused for the next 24 hours. |
| The Advanced File Manager WordPress plugin before 6.0.0 does not correctly determine whether a stored file is an SVG before sanitising it, allowing users granted file-manager access by an administrator to store a file containing script that is not stripped and that runs in the browser of anyone who opens it, including an administrator. |
| The User Profile Builder WordPress plugin before 4.0.1 does not escape the current page URL before outputting it in a JavaScript context on one of its admin pages, leading to Reflected Cross-Site Scripting against high-privilege users. |
| The Redirection for Contact Form 7 WordPress plugin before 3.2.12 does not sanitise or escape submitted form data stored as lead entries before outputting it in the lead debug metabox, allowing unauthenticated attackers to store a malicious script that executes when a logged-in user views the entry with the Redirection for Contact Form 7 WordPress plugin before 3.2.12's debug mode enabled. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in geekontheroad Live Summary for Gravity Forms live-summary-for-gravity-forms allows Reflected XSS.This issue affects Live Summary for Gravity Forms: from n/a through 1.2.10. |
| Deserialization of Untrusted Data vulnerability in GS Plugins GS Pins for Pinterest gs-pinterest-portfolio allows Object Injection.This issue affects GS Pins for Pinterest: from n/a through 1.9.2. |
| Deserialization of Untrusted Data vulnerability in GS Plugins WordPress Team Members – GS Plugins gs-team-members allows Object Injection.This issue affects WordPress Team Members – GS Plugins: from n/a through 2.8.2. |
