| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix races in cifsd thread creation
The cifsd demultiplex thread can run and access tcp_ses before the parent
thread has finished populating tcp_ses, which the worker thread accesses
locklessly.
Also, the kthread_run macro may start the thread before returning the
thread pointer. Because the pointer is part of the structure that the
thread can access, if the kernel is preempted after the thread is spawned,
but before the thread pointer is populated and the thread attempts to exit,
it will sleep, waiting for a SIGKILL signal.
Fix this by moving creation of the thread to after all of tcp_ses'es
fields are populated, and spawning the thread last, using a split
kthread_create/wake_up_process logic. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: ibss: wait for in-flight TX on disconnect
While leaving an IBSS in ieee80211_ibss_disconnect() mac80211 flushes
stations, turns the carrier off and immediately tells the driver to
leave as well. While there may be synchronize_net() in station flush
and in this code later, packets can still be transmitted due to
cross-CPU race conditions after carrier off is set.
Therefore, it's possible for a race to happen where a TX to the
driver occurs while or after telling it to leave the IBSS. This can
be confusing to drivers, and in the case of iwlwifi leads to an
attempt to use invalid queues.
Move netif_carrier_off() to occur before sta_info_flush() during
IBSS disconnect, and add synchronize_net() if flushing didn't,
so that the synchronize_net() always happens between turning the
carrier off and telling the driver, avoiding this race. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: defer rq_argp and rq_resp free until after RCU grace period
svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously
via kfree(), but defers the rqstp struct free via kfree_rcu(). After
svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is
a window where RCU readers that started before list_del_rcu() can still
traverse the thread list and find the rqstp. These readers (e.g.
nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has
already been freed — a use-after-free.
Fix this by moving the kfree of rq_argp and rq_resp into an explicit
call_rcu() callback alongside the struct free. Resources not accessed
by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain
synchronously freed. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Make core-sched flips wait for in-flight selections
Core scheduling's pick_next_task() operates on all sibling rqs under one
acquisition of the shared core-wide lock. A ->pick_task() that releases the
rq lock leaves every sibling __lock momentarily free, letting
__sched_core_flip(false) complete mid-selection and rebind rq_lockp() under
it. The selection resumes on the split locks, touching sibling state it no
longer protects, and __schedule() finally releases a lock that was never
taken while leaking the one that was.
Count in-flight core-wide selections in the leader's rq->core_pick_in_flight
and make __sched_core_flip() wait for the count to drain. The count only
changes under the shared lock, which the flip holds while sampling, so no
other ordering is needed. The wait can repeat while selections overlap, but
the flip backs off between samples and flips are rare cookie-lifetime
events.
sched_core_cpu_deactivate() moves the count to the new leader - a stale copy
left behind would bias it forever if that CPU later returns as its own
leader. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: stop killed, freed and out_of_sync sharing a byte
The three connection state flags are single-bit bitfields, so they occupy
one byte of struct smc_connection and every store to one is a
read-modify-write of the other two:
u8 killed : 1;
u8 freed : 1;
u8 out_of_sync : 1;
They are not written under a common lock. smc_cdc_msg_validate() sets
out_of_sync from the receive tasklet, while smc_conn_kill() sets killed
from process context under lock_sock(), and the receive path does not defer
to the backlog when the socket is owned -- smc_cdc_msg_recv() takes only
bh_lock_sock().
Give each flag its own byte so a store no longer touches its neighbours.
All readers test them as booleans and are unchanged. struct smc_connection
grows by two bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
sockmap: Fix use-after-free in udp_bpf_recvmsg()
syzbot reported use-after-free of struct sk_msg in sk_msg_recvmsg(). [0]
sk_msg_recvmsg() peeks sk_msg from psock->ingress_msg under a lock,
but its processing is lockless.
Thus, sk_msg_recvmsg() must be serialised by callers, otherwise
multiple threads could touch the same sk_msg.
For example, TCP uses lock_sock(), and AF_UNIX uses unix_sk(sk)->iolock.
Initially, udp_bpf_recvmsg() had used lock_sock(), but the cited
commit removed it.
Let's serialise sk_msg_recvmsg() with lock_sock() in udp_bpf_recvmsg().
Note that holding spin_lock_bh(&sk->sk_receive_queue.lock) is not
an option due to copy_page_to_iter() in sk_msg_recvmsg().
[0]:
BUG: KASAN: slab-use-after-free in sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428
Read of size 4 at addr ffff88814cdcf000 by task syz.0.24/6020
CPU: 1 UID: 0 PID: 6020 Comm: syz.0.24 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428
udp_bpf_recvmsg+0x4bd/0xe00 net/ipv4/udp_bpf.c:84
inet_recvmsg+0x260/0x270 net/ipv4/af_inet.c:891
sock_recvmsg_nosec net/socket.c:1078 [inline]
sock_recvmsg+0x1a8/0x270 net/socket.c:1100
____sys_recvmsg+0x1e6/0x4a0 net/socket.c:2812
___sys_recvmsg+0x215/0x590 net/socket.c:2854
do_recvmmsg+0x334/0x800 net/socket.c:2949
__sys_recvmmsg net/socket.c:3023 [inline]
__do_sys_recvmmsg net/socket.c:3046 [inline]
__se_sys_recvmmsg net/socket.c:3039 [inline]
__x64_sys_recvmmsg+0x198/0x250 net/socket.c:3039
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb319f9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb31ad97028 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007fb31a216090 RCX: 00007fb319f9aeb9
RDX: 0000000000000001 RSI: 0000200000000400 RDI: 0000000000000004
RBP: 00007fb31a008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000040000021 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fb31a216128 R14: 00007fb31a216090 R15: 00007ffe21dd0a98
</TASK>
Allocated by task 6019:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x3d1/0x6e0 mm/slub.c:5780
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
alloc_sk_msg net/core/skmsg.c:510 [inline]
sk_psock_skb_ingress_self+0x60/0x350 net/core/skmsg.c:612
sk_psock_verdict_apply net/core/skmsg.c:1038 [inline]
sk_psock_verdict_recv+0x7d9/0x8d0 net/core/skmsg.c:1236
udp_read_skb+0x73e/0x7e0 net/ipv4/udp.c:2045
sk_psock_verdict_data_ready+0x12d/0x550 net/core/skmsg.c:1257
__udp_enqueue_schedule_skb+0xc54/0x10b0 net/ipv4/udp.c:1789
__udp_queue_rcv_skb net/ipv4/udp.c:2346 [inline]
udp_queue_rcv_one_skb+0xac5/0x19c0 net/ipv4/udp.c:2475
__udp4_lib_mcast_deliver+0xc06/0xcf0 net/ipv4/udp.c:2585
__udp4_lib_rcv+0x10f6/0x2620 net/ipv4/udp.c:2724
ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207
ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241
NF_HOOK+0x336/0x3c0 include/linux/netfilter.h:318
dst_input include/net/dst.h:474 [inline]
ip_sublist_rcv_finish+0x221/0x2a0 net/ipv4/ip_input.c:584
ip_list_rcv_finish net/ipv4/ip_inp
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Replace waitqueue and flag with completion
The driver previously used a waitqueue along with an explicit
request_done flag, but without proper barriers around request_done.
An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted
to fix this by adding the missing memory barriers. Rather than
adding the barriers, this patch replaces the waitqueue+flag with
a completion, which is designed for this exact purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync
Yue Sun reported a use-after-free and debugobjects warning in
udp_tunnel_nic_device_sync_work() during concurrent device operations.
The workqueue core clears the internal pending bit before invoking the
worker. At that point, a concurrent thread can queue the work again.
When the already running worker eventually clears the work_pending flag
to 0, it mistakenly clears the flag for the newly queued instance.
udp_tunnel_nic_unregister() then observes work_pending as 0 and frees
the structure while the second work item is still active in the queue,
leading to UAF.
Fix this by returning early in udp_tunnel_nic_device_sync() if
work_pending is already set, preventing redundant work queueing. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - protect service table iterations with service_lock
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
Fix this by holding service_lock across all list_for_each_entry()
iterations of service_table in adf_dev_init(), adf_dev_start(),
adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),
adf_dev_restarted_notify(), and adf_error_notifier().
The lock ordering is safe: callers of the static helpers (adf_dev_up()
and adf_dev_down()) acquire state_lock before service_lock, and no
event_hld callback or service_lock holder ever acquires state_lock in
the reverse order. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event()
Sashiko points out the radix_tree itself is RCU safe, but nothing ever
frees the mlx4_srq struct with RCU, and it isn't even accessed within the
RCU critical section. It also will crash if an event is delivered before
the srq object is finished initializing.
Use the spinlock since it isn't easy to make RCU work, use
refcount_inc_not_zero() to protect against partially initialized objects,
and order the refcount_set() to be after the srq is fully initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels
MHI stack offers the 'auto_queue' feature, which allows the MHI stack to
auto queue the buffers for the RX path (DL channel). Though this feature
simplifies the client driver design, it introduces race between the client
drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback'
for the DL channel may get called before the client driver is fully probed.
This means, by the time the dl_callback gets called, the client driver's
structures might not be initialized, leading to NULL ptr dereference.
Currently, the drivers have to workaround this issue by initializing the
internal structures before calling mhi_prepare_for_transfer_autoqueue().
But even so, there is a chance that the client driver's internal code path
may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is
called, leading to similar NULL ptr dereference. This issue has been
reported on the Qcom X1E80100 CRD machines affecting boot.
So to properly fix all these races, drop the MHI 'auto_queue' feature
altogether and let the client driver (QRTR) manage the RX buffers manually.
In the QRTR driver, queue the RX buffers based on the ring length during
probe and recycle the buffers in 'dl_callback' once they are consumed. This
also warrants removing the setting of 'auto_queue' flag from controller
drivers.
Currently, this 'auto_queue' feature is only enabled for IPCR DL channel.
So only the QRTR client driver requires the modification. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Call wakeup_preempt() for queued tasks during class change
Paul reported recent RCU changes exposed a lost resched where CPU idles
with a rcutorture thread waiting while being completely runnable.
Dumping the rq state at the time of idling with runnable tasks showed
the following:
rq->next_class = &fair_sched_class
rq->nr_running = 1
rq->cfs.h_nr_queued = 0
rq->rt.rt_nr_running = 1
Although the waiting task was an RT task, "rq->next_class" did not point
to rt_sched_class and was stuck at the lower priority fair_sched_class.
Inspecting sched_change_end() revealed the following race with
__sched_setscheduler() for queued, but non-running tasks:
CPU0 CPU1
==== ====
__schedule()
/*
* rq->donor is a fair task that blocks.
* rq->next_class = &fair_sched_class
*/
rq_lock(rq0)
pick_next_task()
/* nr_running = 0 */
pick_task_fair()
sched_balance_newidle()
raw_spin_rq_unlock(rq0)
rq_lock(rq0)
activate_task(rq0, p)
/* p is a fair task */
rq0->nr_running++;
rq0->cfs.h_nr_queued++;
wakeup_preempt(rq, p)
rq->next_class = &fair_sched_class
resched_curr()
rq_unlock(rq0)
__sched_setscheduler(p)
/* p is moved to SCHED_RR */
task_rq_lock(p)
sched_change_begin()
rq0->cfs.h_nr_queued--;
rq0->rt.rt_nr_running++;
sched_change_end()
/*
* p->on_rq = 1 (ctx->queued)
* but p is not rq->donor
* (!ctx->running) hence
* resched_curr() is and
* rq->next_class upgrade is
* skipped.
*/
task_rq_unlock()
raw_spin_rq_lock(rq0)
/*
* rq->nr_running = 1
* rq->cfs.h_nr_queued = 0
* rq->rt.rt_nr_running = 1
* rq->next_class = &fair_sched_class
*/
if (rq->cfs.h_nr_queued && ...)
/* Above is false */
if (rq_modified_above(this_rq, &fair_sched_class))
/* Also false since rq->next_class is still fair */
/*
* sched_balance_newidle() is considered to
* have failed to pull any fair tasks and no
* other wakeups were detected.
*/
return NULL; /* pick_task_fair() */
pick_task_idle()
return rq->idle;
next = rq->idle;
/* Preemption indicators are lost */
clear_tsk_need_resched(prev);
clear_preempt_need_resched();
rq->curr = rq->idle;
!!! rq->idle switches in with rq->running == 1 but !need_resched() !!!
In simple words, enqueue, followed by a class change of the newly queued
task goes unnoticed in rq->next_class indicator and
sched_balance_newidle() sees no fair task, nor any higher priority task
enqueued.
The above sequence will lead to CPU idling with a runnable task on the
CPU.
Call wakeup_preempt() for ctx->queued cases in sched_change_end() to
re-evaluate rq->next_class after class change (ENQUEUE_CLASS) and set
the NEED_RESCHED indicator accordingly.
Newidle balance will correctly see an enqueue of a higher priority
t
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix UAF in iso_recv_frame
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix readahead synchronisation issues by loading all folios upfront
There are some synchronisation issues that derive from the app thread
adding more folios to the rolling buffer whilst the collector thread is
looking at them or trying to clear them, such as determining the setting of
front_folio_order when the next folio hasn't been added yet,
The reason for the rolling buffer approach is that loading the buffer
upfront and then dropping all the refs just acquired is quite a slow
operation, and loading progressively allows some of the cost to be deferred
until after at least some of the I/O is started.
Instead, a better way is to load all the folios into the rolling buffer
upfront - and then drop the refs later, once the I/O is in progress. (Even
better would be for the refs not to be there at all.)
Fix this by changing the rolling buffer loader to load all the folios
selected by the VM for readahead upfront into the folio queue. The folio
queue is allocated a batch worth at a time as we don't know how many folios
are involved (the readahead_control struct, alas, has a page count, not a
folio count).
The folio refs acquired from readahead are then dropped in bulk once the
first subrequest is dispatched as it's quite a slow operation. The
collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it
doesn't unlock folios before the xarray has been scanned for them.
This simplifies the buffer handling later and isn't noticeably slower as
the xarray doesn't need to be modified and the folios are all already
pre-locked. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: serialize vblank counter reads against GPU reset
The vblank counter callback reads display registers and scanout
position without holding reset_domain->sem. During GPU recovery,
display commit work can call the callback while reset owns the
semaphore for writing. The hardware access then triggers the
lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets
TAINT_WARN when lockdep is enabled.
Try to acquire the reset semaphore for reading before accessing the
hardware, and hold it across the counter and scanout-position reads.
If reset is already in progress, return DRM's cached software vblank
count instead. This avoids blocking behind reset and avoids accessing
display hardware while it is being reset.
The cached count is less accurate than the hardware count, but is
used only when reset prevents a safe hardware read. This addresses
the reset-time warning from this vblank path; it does not suppress or
fix unrelated lockdep warnings.
(cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934) |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Add a channel shutdown field
sashiko complained about possible teardown problem. The scenario
CPU 0 CPU 1
imx_mu_isr() imx_mu_shutdown()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx));
imx_mu_specific_rx()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0);
free_irq()
The RX event remains enabled because in this short window the RX event
was disabled in ->shutdown() while the interrupt was active and then
enabled again by the ISR while ->shutdown waited in free_irq().
This race requires timing and if happens can be problematic on shared
handlers if the "removed" channel triggers an interrupt. In this case
the irq-core will shutdown the interrupt with the "nobody cared"
message.
Introduce imx_mu_con_priv::shutdown to signal that the channel is
shutting down. This flag is set with the lock held (by
imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which
only enables the event if the channel has not been shutdown and
serialises on the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gem: fix race between change_handle and handle_delete
drm_gem_change_handle_ioctl leaves the old handle live in the IDR
during the window between spin_unlock(table_lock) and the final
spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old
handle succeeds in this window, decrements handle_count to 0, and frees
the GEM object while the new handle's IDR entry still references it.
NULL the old handle's IDR entry before dropping table_lock so that any
concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL.
Restore the old entry on the prime-bookkeeping error path. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Use devm_pm_runtime_enable()
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime_enable(), remove manual pm_runtime_disable()
invocations and move the pm_runtime handling in probe before
devm_mbox_controller_register(). |
