| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in libimobiledevice up to 1.4.0. This issue affects the function service_receive of the file src/afc.c of the component AFC Service. Executing a manipulation can lead to double free. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent stale XSK buffer release on refill retry
When an XDP redirect to an AF_XDP socket fails because its RX ring is
full, the XSK core frees the buffer. During the subsequent batched refill
of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before
allocating a replacement. If that refill succeeds only partially, a WQE
left without a replacement retains its old buffer pointer.
The buffer can meanwhile be allocated to another WQE. A later refill
retry can then free the live buffer through the stale pointer and publish
the same UMEM frame twice.
Mark the WQE as released immediately after the driver-side free. The flag
is already cleared when a replacement buffer is assigned, so refill
retries no longer release stale pointers.
The failure is silent and produces no kernel warning or splat. A
standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP
traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914
packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64
ownership/double-publication errors. With this change it processed
356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events,
with no ownership or data errors. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix double-free in nvif_vmm_dtor
On failure, nouveau_cli_init() calls nouveau_cli_fini() to tear
the client down. Then, nouveau_drm_open() also enters into its
cleanup path and calls nouveau_cli_fini() AGAIN. nouveau_cli_fini()
calls nouveau_vmm_fini():
void
nouveau_vmm_fini(struct nouveau_vmm *vmm)
{
nouveau_svmm_fini(&vmm->svmm);
nvif_vmm_dtor(&vmm->vmm);
vmm->cli = NULL;
}
Inside nvif_vmm_dtor(), vmm->page is freed unconditionally:
void
nvif_vmm_dtor(struct nvif_vmm *vmm)
{
kfree(vmm->page);
nvif_object_dtor(&vmm->object);
}
vmm->page is never cleared after being freed, so the second call of
nvif_vmm_dtor() will cause a double-free.
Found by fuzzing the nouveau driver with a modified Syzkaller:
BUG: KASAN: double-free in nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
Free of addr ffff888010fcdc30 by task syz.0.173/2567
CPU: 1 UID: 0 PID: 2567 Comm: syz.0.173 Not tainted 7.2.0 #24 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcb/0x5a0 mm/kasan/report.c:482
kasan_report_invalid_free+0xaa/0xd0 mm/kasan/report.c:557
check_slab_allocation+0xe4/0x110 mm/kasan/common.c:235
kasan_slab_pre_free include/linux/kasan.h:199 [inline]
slab_free_hook mm/slub.c:2622 [inline]
slab_free mm/slub.c:6377 [inline]
kfree+0x192/0x590 mm/slub.c:6692
nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127
nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225
nouveau_drm_open+0x24e/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1255
drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176
drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335
drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388
drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211
chrdev_open+0x21c/0x660 fs/char_dev.c:411
do_dentry_open+0x59d/0x12b0 fs/open.c:947
vfs_open+0x82/0x390 fs/open.c:1052
do_open fs/namei.c:4700 [inline]
path_openat+0x2345/0x3420 fs/namei.c:4863
do_file_open+0x207/0x460 fs/namei.c:4892
do_sys_openat2+0xd1/0x1d0 fs/open.c:1368
do_sys_open fs/open.c:1374 [inline]
__do_sys_openat fs/open.c:1390 [inline]
__se_sys_openat fs/open.c:1385 [inline]
__x64_sys_openat+0x144/0x200 fs/open.c:1385
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc6d687594d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6d5295008 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007fc6d6b06180 RCX: 00007fc6d687594d
RDX: 0000000000022501 RSI: 0000200000000000 RDI: ffffffffffffff9c
RBP: 00007fc6d691c303 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fc6d6b06218 R14: 00007fc6d6b06180 R15: 00007ffd9451d760
</TASK>
Allocated by task 2567 on cpu 1 at 163.593900s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5334 [inline]
__kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359
_kmalloc_noprof include/linux/slab.h:992 [inline]
nvif_vmm_ctor+0x3c0/0x7e0 drivers/gpu/drm/nouveau/nvif/vmm.c:237
nouveau_vmm_init+0x40/0x90 drivers/gpu/drm/nouveau/nouveau_vmm.c:134
nouveau_cli_init+0x7b9/0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: avoid double-free of OTP NVMEM device
If factory OTP setup fails after the user OTP NVMEM device has been
registered, mtd_otp_nvmem_add() unregisters the user device but leaves
mtd->otp_user_nvmem set. On an error, the caller unregisters it again.
For -EOPNOTSUPP, registration continues and normal teardown unregisters
it again.
Clear mtd->otp_user_nvmem after unregistering it. |
| Use of externally-controlled format string in SQL Server allows an authorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio
If all bios finish before btrfs_encoded_read_regular_fill_pages()
returns, it calls btrfs_uring_read_extent_endio() and previously
returned the I/O status. A negative errno then made
btrfs_uring_read_extent() unlock and free while
btrfs_uring_read_finished() did the same again.
Return -EIOCBQUEUED so only the deferred path cleans up. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: fix TE GPIO lifetime for host attach
When the Exynos DSI driver was generalized into samsung-dsim, the TE
GPIO acquisition was switched from gpiod_get_optional() to
devm_gpiod_get_optional() while keeping the matching gpiod_put() calls.
That combination is wrong for a managed descriptor.
However, dropping the puts and keeping the managed get is also wrong:
samsung_dsim_register_te_irq() runs from the DSI host attach callback,
and host detach/reattach can happen without destroying the device that
owns the managed action. A second attach would then request the GPIO
again without having released it.
Switch back to a non-managed gpiod_get_optional() and keep the explicit
gpiod_put() on the request_irq() error path and in
samsung_dsim_unregister_te_irq().
[Luca: remove unnecessary comment] |
| A Use of Externally-Controlled Format String vulnerability in the jti-dialoutd of Juniper Networks Junos OS Evolved allows an authenticated network attacker to cause persistent telemetry dial-out denial of service via a crafted analytics sensor resource submitted through gNMI listener. |
| A use of externally-controlled format string vulnerability in Fortinet FortiOS 7.2.0 through 7.2.4, FortiOS 7.0.0 through 7.0.11, FortiOS 6.4.0 through 6.4.12, FortiOS 6.2.0 through 6.2.14, FortiOS 6.0.0 through 6.0.16, FortiOS 5.6 all versions, FortiOS 5.4 all versions, FortiOS 5.2 all versions, FortiOS 5.0 all versions, FortiOS 4.3 all versions, FortiOS 4.2 all versions, FortiOS 4.1 all versions, FortiOS 4.0 all versions, FortiPAM 1.0 all versions, FortiProxy 7.2.0 through 7.2.4, FortiProxy 7.0.0 through 7.0.10, FortiProxy 2.0.0 through 2.0.12, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to execute unauthorized code or commands via specially crafted command. |
| A use of externally-controlled format string vulnerability in Fortinet FortiOS 7.4.0, FortiOS 7.2.0 through 7.2.5, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiOS 6.2 all versions, FortiPAM 1.1.0, FortiPAM 1.0 all versions, FortiProxy 7.2.0 through 7.2.5, FortiProxy 7.0.0 through 7.0.11, FortiProxy 2.0 all versions, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiSwitchManager 7.2.0 through 7.2.2, FortiSwitchManager 7.0.0 through 7.0.2 allows attacker to execute unauthorized code or commands via specially crafted cli commands and http requests. |
| A use of externally-controlled format string vulnerability in Fortinet FortiOS 7.4.0, FortiOS 7.2.0 through 7.2.5, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiOS 6.2 all versions, FortiOS 6.0.0 through 6.0.16, FortiPAM 1.1.0, FortiPAM 1.0 all versions, FortiProxy 7.2.0 through 7.2.5, FortiProxy 7.0.0 through 7.0.11, FortiProxy 2.0 all versions, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to execute unauthorized code or commands via specially crafted commands |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/ras: add ras_suspend callback and use it for cp_ecc_error_irq
cp_ecc_error_irq is acquired in amdgpu_gfx_ras_late_init() but
released in gfx_v9_0_hw_fini(), so the put site has to query
amdgpu_irq_enabled() because the get is skipped on SR-IOV VF.
ras_late_init / ras_fini have no suspend counterpart, so move the
put to amdgpu_gfx_ras_suspend() / amdgpu_gfx_ras_fini() and add a
matching ras_suspend callback that is invoked from
amdgpu_ras_suspend() before disable_all_features(). The get and
put now sit in the same place and check the same condition (not
VF, funcs registered), no refcount querying needed.
An active flag gates ras_fini so the
suspend-then-unload-without-resume path falls into
amdgpu_ras_block_late_fini_default() instead of double-releasing
what ras_suspend already cleaned up.
Drop the cp_ecc_error_irq put from gfx_v9_0_hw_fini(). gfx_v8_0
manages cp_ecc_error_irq locally and is unaffected; no other GFX
generation has this IRQ. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix double free of WoL irq
We do not need to free wol_irq since it was instantiated with
devm_request_irq(). So devres will free for us. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix -EIO cleanup order in queue_rq
On -EIO, the RDMA queue_rq path reports a host path error and then
still cleans up the command and unmaps the SQE DMA. The path error
helper completes the request, so that is double cleanup and DMA unmap
after the request is already complete.
Unmap the SQE first, then report the host path error. Skip the outer
command cleanup on that path. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Nullify "have run CPUs" mask pointer when freeing it
Nullify have_run_cpus when freeing the mask, particularly in the error path
of __sev_guest_init(), so that KVM doesn't have to subtly use sev->active
to track whether or not the mask has been freed. As pointed out by Sashiko,
blindly freeing the mask in sev_vm_destroy() results in a double-free if
the mask is freed if __sev_guest_init() fails.
Throw the logic in a helper as nullifying the pointer is frustratingly
difficult and weird due to have_run_cpus being a single-entry array when
CPUMASK_OFFSTACK=n. Deliberately don't use CPUMASK_VAR_NULL, as it's not
directly assignable when the cpumask is on-stack, e.g. requires using a
local variable and a memcpy(), which is beyond ridiculous. Furthermore,
while clearing the on-stack bitmask is an unnecessary and arguably unwanted
side effect, KVM absolutely relies on '0' being the "null" value given that
the struct is zero-allocated.
Opportunistically add an alloc() helper to pair with free(); there are just
enough call sites to make doing so worthwhile. |
| In the Linux kernel, the following vulnerability has been resolved:
dm_early_create: fix freeing used table on dm_resume failure
If dm_resume fails, the kernel attempts to free table with
dm_table_destroy, but the table was already instantiated with
dm_swap_table. This commit skips the call to dm_table_destroy in this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix fils_discovery double free on alloc failure
ieee80211_set_fils_discovery() calls kfree_rcu() on the old template
before allocating the replacement. If the kzalloc() then fails, it
returns -ENOMEM while link->u.ap.fils_discovery still points at the
object already queued for freeing. A later update or AP teardown
(ieee80211_stop_ap()) re-queues that same rcu_head; the second free is
caught by KASAN when the RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800c065280 by task swapper/0/0
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-96 of size 96
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix potential UAF when ddgst mismatch
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
l2cap_ecred_reconf_rsp() returns early on success without clearing
chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,
l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a
successful transaction to prevent the channel from matching subsequent
responses with the recycled ident value.
A remote attacker that completed a reconfiguration as the peer can
replay a failure response with the stale ident, causing the kernel to
match and destroy the already-established channel via
l2cap_chan_del(chan, ECONNRESET).
Clear chan->ident for all matching channels on success, and harden the
failure path by using l2cap_chan_hold_unless_zero() consistent with
other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident). |
| In the Linux kernel, the following vulnerability has been resolved:
exit: prevent preemption of oopsing TASK_DEAD task
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler) |
