| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl()
smb_inherit_dacl() trusts the on-disk num_aces value from the parent
directory's DACL xattr and uses it to size a heap allocation:
aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...);
num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces)
without checking that it is consistent with the declared pdacl_size.
An authenticated client whose parent directory's security.NTACL is
tampered (e.g. via offline xattr corruption or a concurrent path that
bypasses parse_dacl()) can present num_aces = 65535 with minimal
actual ACE data. This causes a ~8 MB allocation (not kzalloc, so
uninitialized) that the subsequent loop only partially populates, and
may also overflow the three-way size_t multiply on 32-bit kernels.
Additionally, the ACE walk loop uses the weaker
offsetof(struct smb_ace, access_req) minimum size check rather than
the minimum valid on-wire ACE size, and does not reject ACEs whose
declared size is below the minimum.
Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path.
A legitimate mount.cifs client creates a parent directory over SMB
(ksmbd writes a valid security.NTACL xattr), then the NTACL blob on
the backing filesystem is rewritten to set num_aces = 0xFFFF while
keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s
hash check still passes. A subsequent SMB2 CREATE of a child under
that parent drives smb2_open() into smb_inherit_dacl() (share has
"vfs objects = acl_xattr" set), which fails the page allocator:
WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0
Workqueue: ksmbd-io handle_ksmbd_work
__alloc_frozen_pages_noprof+0x46c/0x9c0
___kmalloc_large_node+0x68/0x130
__kmalloc_large_node_noprof+0x24/0x70
__kmalloc_noprof+0x4c9/0x690
smb_inherit_dacl+0x394/0x2430
smb2_open+0x595d/0xabe0
handle_ksmbd_work+0x3d3/0x1140
With the patch applied the added guard rejects the tampered value
with -EINVAL before any large allocation runs, smb2_open() falls back
to smb2_create_sd_buffer(), and the child is created with a default
SD. No warning, no splat.
Fix by:
1. Validating num_aces against pdacl_size using the same formula
applied in parse_dacl().
2. Replacing the raw kmalloc(sizeof * num_aces * 2) with
kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe
allocation.
3. Tightening the per-ACE loop guard to require the minimum valid
ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and
rejecting under-sized ACEs, matching the hardening in
smb_check_perm_dacl() and parse_dacl().
v1 -> v2:
- Replace the synthetic test-module splat in the changelog with a
real-path UML + KASAN reproduction driven through mount.cifs and
SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name
in v1 since it does not exist in ksmbd.
- Drop the commit-hash citation from the code comment per Namjae's
review; keep the parse_dacl() pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Add sanity check for DMC load address
For DMC firmware header version 3, the firmware load address is stored
in dmc_info->start_mmioaddr and later used by dmc_load_program().
Unlike the MMIO address table, the firmware load address is not
validated. Add a sanity check to ensure it is within the valid range.
BSpec: 69671, 68378
(cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c) |
| An Improper Validation of Specified Quantity in Input vulnerability in rpd of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent OSPF peer to disclose rpd memory or cause a rpd crash via a malformed OSPF packets. |
| A flaw was found in uv. This vulnerability allows an attacker to execute malicious code during package resolution or installation via specially crafted ZIP (Zipped Information Package) archives that exploit parsing differentials, requiring user interaction to install an attacker-controlled package. |
| Cpanel::JSON::XS versions from 4.33 before 4.80 for Perl accept malformed UTF-8 in bare hash keys under allow_barekey in decode_hv.
With utf8 and allow_barekey, which relaxed enables, a quoted key is validated as UTF-8 but a bare key's bytes are stored as a UTF-8 flagged string without any check. Malformed UTF-8, control bytes and backslashes reach the decoded hash, while malformed UTF-8 and control bytes in a quoted key or a value are rejected.
Later operations on the key, including lc, uc or encoding the hash again, die with a malformed UTF-8 error. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can consume excessive time and memory when an application accesses the page count of a crafted encrypted PDF whose page tree declares a forged /Count value. Even after successful decryption, page-count retrieval trusts the unvalidated declared count instead of walking the page tree, allowing the attacker-controlled value to drive excessive work and memory use. This issue is fixed in version 6.21.3. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, node-forge did not validate the AES-GCM tagLength option passed to start() during decryption through forge.cipher.createDecipher(). When an application derived tagLength from received data or used an unset or zero-like configuration value, a value that converted to zero together with an empty or missing authentication tag caused the calculated and supplied tags to compare as empty, so decipher.finish() accepted unauthenticated ciphertext. Applications that omit tagLength to use the 128-bit default or pass a fixed valid tag length are unaffected. This issue is fixed in version 1.4.1. |
| An Improper Validation of Specified Quantity in Input vulnerability in the routing daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker to cause a denial of service by sending a specific IS-IS SRv6 packet when SRv6 and Flexible Algorithm are enabled. |
| When writing a long cookie name and value to a Netscape cookie jar, a remote
HTTP server can make `curl` write a record that exceeds its line-length
parsing limit. Consequently, any subsequent `curl` invocation reading from
that same cookie jar using `--cookie` silently aborts parsing prematurely upon
encountering the too long line, ignoring all subsequent valid cookies in the
file. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, node-forge accepted a PKCS#12 MAC or PKCS#12 password-based encryption iteration count of zero or less. pki.pbe.generatePkcs12Key() then returned a constant key independent of the password and salt, allowing crafted PKCS#12 input processed by forge.pkcs12.pkcs12FromAsn1() to bypass password-based integrity checks. Predictable encryption keys and IVs also affected PKCS#12 PBE using pbeWithSHAAnd3-KeyTripleDES-CBC or pbewithSHAAnd40BitRC2-CBC, including shrouded key bags, encrypted SafeContents, and PKCS#8 ENCRYPTED PRIVATE KEY input processed independently by forge.pki.decryptPrivateKeyInfo(). PBES2/PBKDF2-encrypted content is unaffected. This issue is fixed in version 1.4.1. |
| Edgeless Systems Contrast from 1.21.0 before 1.25.0 contains a non-deterministic registry selection flaw in imagepuller that can prefer wildcard configuration entries over concrete domain matches. When a pull configuration lists both a concrete domain and its parent wildcard, registry credentials, CA bundles, or mirror settings intended for the wildcard may be applied to the concrete registry, leaking credentials or pull metadata. |
| Improper validation of syntactic correctness of input in Windows Hyper-V allows an authorized attacker to perform spoofing locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: only accept doorbell BOs as queue doorbell
amdgpu_userq_get_doorbell_index() pins any BO passed as doorbell_handle
into the doorbell domain. For a regular BO, TTM moves it with
ttm_bo_move_null() and its contents are lost. Since an importer on the
same device gets the exporter's GEM object, a client can do this to a
buffer another client shared with it.
Reject BOs that were not created in the doorbell domain.
v2: drop the error message, use a local abo variable (Christian)
(cherry picked from commit f7497bbc19db4821c62b9d97b31c9086feb2d917) |
| vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC Generate and GenerateStream service that forwards unchecked prompt token IDs to EngineCore. Attackers can submit requests with out-of-vocabulary prompt.token_ids values to trigger a fatal embedding lookup failure that terminates EngineCore and leaves the server unhealthy. |
| MIME::Field::ParamVal versions before 5.521 for Perl allow one invalid Content-Type parameter to hide the parameters after it, including the multipart boundary.
Parameter parsing stops at the first parameter whose name it cannot read, such as x:y=1 or a name containing an 8-bit byte, and drops every parameter after it. When the boundary is among them, MIME::Parser keeps the multipart body as a single undecoded part without marking the parse as ambiguous.
Mail readers that skip the invalid parameter still find the boundary. A remote sender can hide an attachment from a filter that relies on ambiguous_content() while the recipient's mail client shows it. |
| A Kafka broker using SASL/OAUTHBEARER with the default validator (sasl.oauthbearer.jwt.validator.class=DefaultJwtValidator) selects its implementation from configuration. When sasl.oauthbearer.jwks.endpoint.url is set, the validator verifies the JWT signature. When that URL is unset (the default) and no verification key resolver is supplied, DefaultJwtValidator silently falls back to ClientJwtValidator, which does not verify the JWT signature, algorithm, or issuer - and the broker starts with no warning or error. This is the residual of CVE-2026-33557, whose fix restored signature verification only on the path where the JWKS endpoint URL is set.
Impact:
A broker in this state accepts any structurally valid JWT, including "alg":"none" tokens. An unauthenticated remote attacker who can reach the listener can forge a token asserting any principal - including configured superusers - and gain full access to the cluster. Only brokers that enable SASL/OAUTHBEARER validation without a JWKS endpoint URL (and without a custom verification key resolver) are affected; brokers that set the URL verify signatures and are not affected. Unlike CVE-2026-110952 (issuer/audience not enforced by default), here no signature is verified at all.
Mitigation (all affected versions, no upgrade required):
Set sasl.oauthbearer.jwks.endpoint.url for every listener/mechanism that uses OAuthBearerValidatorCallbackHandler, or configure a signature-verifying sasl.oauthbearer.jwt.validator.class.
Resolution:
From Apache Kafka 4.2.2, 4.3.1, and 4.4.0: a broker that would fall back to the non-verifying ClientJwtValidator fails to start with a ConfigException instead of running without signature verification (secure by default). |
| webpack-dev-server is a development server that provides live reloading for webpack projects. In versions from 5.1.0 before 5.2.7 and in version 6.0.0, the unauthenticated open-editor endpoint validates the Host header with a regular expression meant for browser Origin schemes, so a Host value beginning with file: or with an extension scheme short-circuits the hostname and allowedHosts checks. A network peer that can reach the dev server can send a request with a malformed Host that passes validation and then causes the endpoint's URL construction to throw, and in the default non-production mode the server returns an HTTP 500 body containing the full exception stack trace, which discloses absolute filesystem paths, installed module locations, and internal source line numbers. The server keeps running, so there is no denial of service. The issue is fixed in webpack-dev-server 5.2.7 and 6.1.0, and users should upgrade to one of those versions or later. |
| OpenStack Ironic before 39.0.1 allows DELETE and GET via vendor_passthru, e.g., to delete accounts from the BMC's Redfish service. |
| When a broker decodes a compressed record batch, the per-record decoder reads a declared body size from the decompressed stream and allocates a buffer of that size before validating it against the bytes available or any configured limit. The size is attacker-controlled, and the batch CRC does not constrain it, so a small (around 90-byte), CRC-valid compressed produce request can declare a body size of up to about 2 GiB and force the broker to attempt that allocation, raising OutOfMemoryError. The record size limit (max.message.bytes), the request size limit, and client/broker quotas bound only the compressed wire size, not the declared decompressed size.
Impact:
An authenticated principal with Write on a topic can crash broker request-handler threads (reached when a batch's codec differs from the topic's compression.type and records are re-encoded) and any consumer that fetches the record, denying service. On brokers started with -XX:+ExitOnOutOfMemoryError, a common hardening, a single crafted request terminates the broker JVM. More seriously, a crafted record is accepted at ingest and written to disk; when the log-cleaner later reads it on a compacted topic, the OutOfMemoryError (an Error, not an Exception) terminates the cleaner thread, which is not restarted. With the default of a single cleaner thread, log compaction then stops for the entire broker, including the internal __consumer_offsets and __transaction_state topics, and the condition persists across restarts until the offending record is removed. The impact is availability only; no data is disclosed or altered.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0, and set max.decompressed.message.bytes (at the broker and/or topic level) to a bounded value appropriate for your workload. Upgrading alone is not sufficient: for backward compatibility this configuration defaults to an effectively unlimited value (about 2 GiB), so a broker remains exposed until the limit is set. Choose a value at or slightly above the largest legitimate decompressed record your applications produce, and comfortably below the broker heap divided by the number of request-handler and cleaner threads. Until you can upgrade and configure the limit, restrict Write access to trusted producers; quotas and max.message.bytes do not mitigate this issue.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the broker validates a record's declared decompressed body size against max.decompressed.message.bytes before allocating, on the produce-validation, log-compaction, and timestamp-lookup paths, and rejects oversized or negative sizes with InvalidRecordException. Operators must set this configuration to a bounded value to be protected, as its default is effectively unlimited. |
