| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Command injection vulnerabilities in the affected interface of AOS-8 could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute commands with the privileges of the impacted mechanism on the underlying operating system. |
| Vulnerability in Oracle Java SE (component: Networking). The supported version that is affected is Oracle Java SE: 27. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| Nezha 1.0.0 before 2.3.15 contains a memory exhaustion vulnerability in the dashboard file manager WebSocket endpoint because fmStream never calls SetReadLimit, leaving message size unbounded. Authenticated users with file manager scopes can send one oversized binary message to /api/v1/ws/file/:id, triggering an OOM kill that drops all agent monitoring. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop
In the dmaengine path the driver pre-submits RX buffers and holds
in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed
only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync()
aborts these descriptors without running their callbacks, and the driver
then frees only the ring shells, leaking every SKB still owned by the
engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted
per channel, the mapping leak can eventually exhaust a limited IOMMU
aperture.
Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a
slot that still owns a live, DMA-mapped buffer, and on stop unmap and free
every such buffer.
axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on
each completion, so it can race axienet_stop(): a completion may submit a
fresh buffer after dmaengine_terminate_sync() has returned, leaving the
channel armed with a buffer the teardown then frees while the engine may
still write into it (dma_release_channel() does not stop it either). Add a
lock that axienet_dma_rx_cb() holds across the @stopping check and the
resubmit, and axienet_stop() holds to set @stopping before terminating.
Once @stopping is set no callback can arm a new buffer, and any armed just
before is aborted by the terminate, so teardown only frees buffers the
engine no longer owns. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: free the matchall entry on destroy
sparx5_tc_matchall_replace() allocates a struct sparx5_mall_entry for
every offloaded matchall filter and adds it to sparx5->mall_entries.
sparx5_tc_matchall_destroy() removes the entry from the list, but never
frees it, so the entry of every deleted mirror and goto matchall filter
is leaked.
Free the entry after unlinking it.
The leak was discovered by an AI code review agent, and reproduced with
kmemleak on a lan969x EV board (EV23X71A) by repeatedly adding and
deleting matchall mirror and goto filters. With the fix, kmemleak no
longer reports the leak. |
| Improper neutralization of special elements used in a command ('command injection') in Windows Update allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix memory leak in vmci_transport_recv_dgram_cb()
During the closure of a datagram socket, the vmci_transport_recv_dgram_cb()
function may be called, which will add the packets
to the socket's backlog; then, after the receive queue is cleared,
the __release_sock() function will move the packet back from the socket's
backlog to the receive queue, which will lead to a memory leak.
sock_close
__sock_release
__vsock_release
// take ownership by user-space
lock_sock_nested
sock_set_flag(sk, SOCK_DEAD)
vmci_transport_release
vmci_dispatch_dgs
vmci_datagram_invoke_guest_handler
vmci_transport_recv_dgram_cb
sk_receive_skb
if (!sock_owned_by_user(sk))
[...]
(!) else if sk_add_backlog()
[...]
(!) skb_queue_purge(&sk->sk_receive_queue)
release_sock
__release_sock
// move all packets from the backlog
// to the receive queue
(!) sk_backlog_rcv
vsock_queue_rcv_skb
[...]
__sock_queue_rcv_skb
if (!sock_flag(sk, SOCK_DEAD))
// Since the socket is "dead", the function will not
// be called
sk->sk_data_ready(sk)
sock_release_ownership(sk);
sock_put
Add a receive queue cleanup in the socket destructor to fix this.
syzkaller report:
unreferenced object 0xffff8880117bfb80 (size 240):
comm "irq/56-vmw_vmci", pid 205, jiffies 4295064448 (age 73.992s)
hex dump (first 32 bytes):
78 dc 26 1e 80 88 ff ff 78 dc 26 1e 80 88 ff ff x.&.....x.&.....
00 00 00 00 00 00 00 00 c0 da 26 1e 80 88 ff ff ..........&.....
backtrace:
[<ffffffff82be8d97>] __alloc_skb+0x287/0x330 net/core/skbuff.c:505
[<ffffffffa114bcbd>] vmci_transport_recv_dgram_cb+0xbd/0x210 [vmw_vsock_vmci_transport]
[<ffffffffa05072c6>] vmci_datagram_invoke_guest_handler+0x366/0x450 [vmw_vmci]
[<ffffffffa050ad75>] vmci_dispatch_dgs+0x235/0x490 [vmw_vmci]
[<ffffffffa050b025>] vmci_interrupt+0x55/0x290 [vmw_vmci]
[<ffffffff8137ad2b>] irq_thread_fn+0x8b/0x1a0 kernel/irq/manage.c:1205
[<ffffffff8137c7ae>] irq_thread+0x28e/0x530 kernel/irq/manage.c:1314
[<ffffffff81253dd6>] kthread+0x2e6/0x3a0 kernel/kthread.c:376
[<ffffffff81004392>] ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:295
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller. |
| IBM MQ 9.4.5.0 through 9.4.5.1 could allow an authenticated user to cause a denial of service by sending a specially crafted message that crashes consuming applications. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0. |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, Transfer-Encoding: chunked causes the HTTP parser in upnp/src/genlib/net/http/httpparser.c to leave parser->content_length at zero while parser_parse_chunky_entity and parser_parse_chunky_body accumulate decoded bytes in parser->msg.entity. The g_maxContentLength checks in http_RecvMessage in upnp/src/genlib/net/http/httpreadwrite.c therefore reject oversized numeric Content-Length bodies but do not enforce the same limit on decoded chunked bodies. A remote peer that can reach a SOAP, GENA, miniserver, or control-point HTTP response path can make the process buffer an entity larger than the configured maximum, causing resource exhaustion and denial of service. This issue is fixed in 2.0.2. |
| Ghidra before 12.2 contains a resource allocation without limits vulnerability in FileSystemIndexHelper used by TarFileSystem and ZipFileSystem, which store unbounded archive entries. Attackers can persuade a user to open or batch-import a crafted TAR or ZIP archive with excessive entries to exhaust the Java heap and hang the session. |
| Wasmtime 47.0.0 before 48.0.3 and 49.0.0 before 49.0.1 contains a fuel accounting flaw in Cranelift-compiled call_ref and try_table catch paths. Malicious guests can reset consumed fuel after calls to run exponentially long on linear fuel, evading timeouts and periodic yields for denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: ma35d1: Fix clock reference leak in ma35d1serial_probe()
of_clk_get() returns a clock with a reference that has to be released
with clk_put(). ma35d1serial_probe() never does that, so the reference
is leaked on the probe error paths and also when the port is removed.
Release it on the error paths and in ma35d1serial_remove(). |
| cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper. |
| undici is an HTTP client library for Node.js. In versions 6.5.0 through 6.29.0, 7.0.0 through 7.30.0, and 8.0.0 through 8.12.1, its EventSource client can be driven to exhaust process memory by a malicious or compromised Server-Sent Events peer. By sending millions of tiny completed data fields with no blank event separator, or a single unfinished line split across many chunks, the parser retains a growing amount of per-field and per-chunk state that the byte-based maxEventSize and maxResponseSize limits do not bound, and because maxResponseSize is enforced on the compressed body before decompression, a small compressed response can expand into enough retained memory to terminate the process. An application only needs to maintain an EventSource connection to an untrusted peer, which controls only the response, and availability is the only impact. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, which bound the retained parser state independently of the byte limits, and users should upgrade to one of those versions or later. There is no workaround. |
| react/http is an event-driven, streaming HTTP client and server implementation for ReactPHP. From 1.0.0 until 1.11.1, React\Http\Browser uses ClientRequestStream::handleData() to append response-header bytes to an internal buffer without enforcing a size limit. A remote server can send a valid status line and partial header, withhold the \r\n\r\n or \n\n header terminator, and continue streaming data so the buffer grows for the life of the connection. Applications that fetch attacker-controlled or attacker-influenced URLs, including URLs reached through redirects, can exhaust PHP memory_limit and crash the event-loop or worker process. Confidentiality and integrity are unaffected. This issue is fixed in version 1.11.1. |
| undici is an HTTP client library for Node.js. In versions 5.15.0 through 6.29.0, 7.0.0 through 7.30.0, and 8.0.0 through 8.12.1, its WebSocket client, including the bundled WebSocket exposed by Node.js, can be driven to exhaust process memory by a malicious or compromised WebSocket server. For every PING frame received, the client automatically writes a PONG response and ignores the backpressure signal from the socket write, so a server that streams small PING frames while never reading the client's PONGs makes the outbound write queue and heap grow without bound until the Node.js process runs out of memory and terminates. The attack is remote and unauthenticated, needs only a normal WebSocket connection, and is asymmetric, since small inbound PINGs produce a much larger retained outbound queue, with availability the only impact. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, which pause WebSocket frame parsing when the automatic PONG response hits socket backpressure and resume on drain, bounding the outbound queue, and users should upgrade to one of those versions or later. There is no workaround. |
| kin-openapi is a Go project for handling OpenAPI files. From 0.145.0 until 0.146.0, openapi3filter repeatedly calls regexp.MustCompile for the same parameter-name regular expression inside the per-query-key loop in urlValuesDecoder.DecodeObject used to decode a deepObject query parameter. An unauthenticated remote client can send an affected endpoint a request containing many unrelated query keys, causing ValidateRequest to perform work and allocations proportional to the attacker-controlled key count for every deepObject parameter. The expression itself is fixed and this is not regular expression denial of service; the resource consumption comes from loop-invariant recompilation. This issue is fixed in version 0.146.0. |
| Lychee is a free, open-source photo-management tool. Prior to 7.7.0, Lychee enables ImageMagick PDF support with Ghostscript but does not apply an effective pre-render limit to PDF page dimensions in ImagickHandler::loadPdf(). An authenticated user who can upload a small PDF with an oversized /MediaBox can cause Imagick::readImage() to consume substantial CPU before failing to produce an image. When QUEUE_CONNECTION selects synchronous processing the request can occupy a web worker, while the official asynchronous Docker configuration can clog the shared image-processing queue and delay other work. The advisory did not identify a Ghostscript sandbox escape. This issue is fixed in version 7.7.0. |
