| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A NULL pointer dereference in the component libPdfCore.dll of Wondershare PDF Reader v1.0.9.2544 allows attackers to cause a Denial of Service (DoS) via a crafted PDF file. |
| A vulnerability in the DHCPv6 relay agent of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of specific fields in a DHCPv6 RELAY-REPLY message. An attacker could exploit this vulnerability by sending a crafted DHCPv6 packet to any IPv6 address that is configured on an affected device. A successful exploit could allow the attacker to cause the dhcp_snoop process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a user in a guest can cause a NULL-pointer dereference in the host, which may lead to denial of service. |
| A Null pointer dereference vulnerability in the Mobile Management Entity (MME) in Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) allows network-adjacent attackers to crash the MME via an S1AP `S1Setup Request` packet missing an expected `Global eNB ID` field. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In NanoMQ version 0.24.6, after enabling auth.http_auth (HTTP authentication), when a client connects to the broker using MQTT CONNECT without providing username/password, and the configuration params uses the placeholders %u / %P (e.g., username="%u", password="%P"), the HTTP request construction phase enters auth_http.c:set_data(). This results in calling strlen() on a NULL pointer, causing a SIGSEGV crash. This crash can be triggered remotely, resulting in a denial of service. This issue has been patched in version 0.24.7. |
| Null pointer dereference in Microsoft Graphics Component allows an unauthorized attacker to deny service locally. |
| Null pointer dereference in Windows Performance Counters allows an authorized attacker to elevate privileges locally. |
| Null pointer dereference in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
| Suricata is a network IDS, IPS and NSM engine. From version 8.0.0 to before version 8.0.4, use of the "tls.alpn" rule keyword can cause Suricata to crash with a NULL dereference. This issue has been patched in version 8.0.4. |
| Ella Core is a 5G core designed for private networks. Prior to version 1.8.0, Ella Core panics when processing a NGAP handover failure message. An attacker able to cause a gNodeB to send NGAP handover failure messages to Ella Core can crash the process, causing service disruption for all connected subscribers. This issue has been patched in version 1.8.0. |
| A race condition during TCP connection teardown can cause tcp_recv() to operate on a connection that has already been released. If tcp_conn_search() returns NULL while processing a SYN packet, a NULL pointer derived from stale context data is passed to tcp_backlog_is_full() and dereferenced without validation, leading to a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: allow ext4_get_group_info() to fail
Previously, ext4_get_group_info() would treat an invalid group number
as BUG(), since in theory it should never happen. However, if a
malicious attaker (or fuzzer) modifies the superblock via the block
device while it is the file system is mounted, it is possible for
s_first_data_block to get set to a very large number. In that case,
when calculating the block group of some block number (such as the
starting block of a preallocation region), could result in an
underflow and very large block group number. Then the BUG_ON check in
ext4_get_group_info() would fire, resutling in a denial of service
attack that can be triggered by root or someone with write access to
the block device.
For a quality of implementation perspective, it's best that even if
the system administrator does something that they shouldn't, that it
will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info()
will call ext4_error and return NULL. We also add fallback code in
all of the callers of ext4_get_group_info() that it might NULL.
Also, since ext4_get_group_info() was already borderline to be an
inline function, un-inline it. The results in a next reduction of the
compiled text size of ext4 by roughly 2k. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Harden uplink netdev access against device unbind
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
BUG: unable to handle page fault for address: 0000000000001300
at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core]
Call Trace:
<TASK>
mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core]
esw_offloads_enable+0x593/0x910 [mlx5_core]
mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
do_syscall_64+0x53/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use. |
| The issue was addressed with improved checks. This issue is fixed in Safari 18.5, iOS 18.5 and iPadOS 18.5, iPadOS 17.7.7, macOS Sequoia 15.5, tvOS 18.5, visionOS 2.5, watchOS 11.5. Processing maliciously crafted web content may lead to an unexpected process crash. |
| A null pointer dereference was addressed with improved input validation. This issue is fixed in iOS 18.7.7 and iPadOS 18.7.7, iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. A user in a privileged network position may be able to cause a denial-of-service. |
| LibJWT is a C JSON Web Token Library. Starting in version 3.0.0 and prior to version 3.3.0, the JWK parsing for RSA-PSS did not protect against a NULL value when expecting to parse JSON string values. A specially crafted JWK file could exploit this behavior by using integers in places where the code expected a string. This was fixed in v3.3.0. A workaround is available. Users importing keys through a JWK file should not do so from untrusted sources. Use the `jwk2key` tool to check for validity of a JWK file. Likewise, if possible, do not use JWK files with RSA-PSS keys. |
| When the ngx_mail_auth_http_module module is enabled on NGINX Plus or NGINX Open Source, undisclosed requests can cause worker processes to terminate. This issue may occur when (1) CRAM-MD5 or APOP authentication is enabled, and (2) the authentication server permits retry by returning the Auth-Wait response header. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In Modem, there is a possible system crash due to incorrect error handling. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01430930; Issue ID: MSV-4836. |
| libfuse is the reference implementation of the Linux FUSE. From version 3.18.0 to before version 3.18.2, a NULL pointer dereference and memory leak in fuse_uring_init_queue allows a local user to crash the FUSE daemon or cause resource exhaustion. When numa_alloc_local fails during io_uring queue entry setup, the code proceeds with NULL pointers. When fuse_uring_register_queue fails, NUMA allocations are leaked and the function incorrectly returns success. Only the io_uring transport is affected; the traditional /dev/fuse path is not affected. PoC confirmed with AddressSanitizer/LeakSanitizer. This issue has been patched in version 3.18.2. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port. |
