| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service.
Root Cause:
In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process.
Affected Scenarios:
Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3462
Note:
The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0). |
| Supabase Realtime provides Broadcast, Presence, and Postgres Changes via WebSockets. Prior to version 2.103.1, the REST broadcast endpoints accept an expired JWT when the exp claim is encoded as a JSON string instead of a JSON number. The same route rejects an expired integer exp token signed with the same tenant secret. The accepted request returns 202 and emits the broadcast to subscribers. This could allow an unauthenticated attacker can broadcast realtime messages to subscribers. The attack can be performed via the Internet/only from within the supabase project. The impact of broadcasting messages to subscribers is application specific. This issue has been patched in version 2.103.1. |
| ArcadeDB before 26.10.2 contains an improper authorization vulnerability that allows revoked users to retain access through already-open Postgres, Bolt, MongoDB, or Redis wire-protocol connections. Attackers holding an existing connection can keep reading and writing data after deletion, grant removal, or password rotation, because executors keep a stale ServerSecurityUser. |
| A reachable assertion in Apache bRPC (version < 1.18.0) on all platforms allows a malicious remote peer to crash the process, resulting in denial of service.
Root Cause:
When a Socket with health checking enabled fails, Socket::WaitAndReset closes its file descriptor while the event dispatcher may still be delivering an input event (EPOLLIN/EVFILT_READ) that was fetched for the just-closed fd. If the health check then succeeds and revives the Socket, Socket::Address succeeds again while the fd is still -1 (the next write reconnects on demand). In that window, Socket::OnInputEvent hits CHECK(!(events & EPOLLIN)) (or the kqueue equivalent) because the Socket is addressable but has no fd. CHECK failures terminate the process when bRPC is built with glog or when the gflag -crash_on_fatal_log is enabled (CHECK always terminates in OFFICIAL_BUILD/NDEBUG builds as well).
Affected Scenarios:
Applications using bRPC clients with health check enabled (-health_check_interval). A malicious remote peer that the client connects to can deliberately abort connections and immediately accept the health check probes, racing connection teardown against health check revival to trigger the assertion and abort the process.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3510
Note:
After applying the fix, stale input events on a Socket revived without an fd are silently dropped instead of triggering the assertion. No user-visible interface or wire protocol is changed. |
| Enforceable assertion in the streaming feature of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a malformed stream feedback frame.
Root Cause:
When handling FRAME_TYPE_FEEDBACK frames, bRPC calls Stream::SetRemoteConsumed() which contains CHECK(_cur_buf_size > 0) and unconditionally asserts CHECK(buf.IsEmpty()) on the frame payload. A feedback frame that carries an unexpected payload, or a feedback frame received on a stream where flow control is disabled (cur_buf_size == 0), reaches these assertions. On failure, CHECK failures abort the process, allowing an unauthenticated single client (once a stream is established) to terminate the server and cause a denial of service.
Affected Scenarios:
Use bRPC server with the streaming control feature (Stream API) served from untrusted network.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3494
The fix rejects malformed feedback frames with EPROTO and closes only the affected stream instead of crashing the whole process, and it bounds buffer shrinking so cur_buf_size never drops to 0 while flow control is enabled. |
| vLLM is an inference and serving engine for large language models. From 0.11.1 until 0.32.0, the DeepSeek-OCR, DeepSeek-OCR-2, and Unlimited-OCR image path allows a remote client that can reach the OpenAI-compatible API to submit a legal image whose normalized pixels sum to zero when that image is alone in its per-step encoder batch. _parse_and_validate_image_input returns no embedding, embed_multimodal propagates that value, and sanity_check_mm_encoder_outputs triggers a fatal assertion that shuts down the engine for all users. This issue is fixed in version 0.32.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: do not trigger BUG() on BH disabled context
__get_vm_area_node() currently triggers a BUG() if in_interrupt() returns
true. However, in_interrupt() also reports true when BH are disabled.
The bridge code can call rhashtable_lookup_insert_fast() with bottom
halves disabled:
__vlan_add()
-> br_fdb_add_local()
spin_lock_bh(&br->hash_lock); <-- Disable BH
-> fdb_add_local()
-> fdb_create()
-> rhashtable_lookup_insert_fast()
-> kvmalloc()
-> vmalloc()
-> __get_vm_area_node()
-> BUG_ON(in_interrupt())
spin_unlock_bh(&br->hash_lock)
this triggers the BUG() despite the caller not being in NMI or
hard IRQ context.
Replace the in_interrupt() check with in_nmi() || in_hardirq(). |
| The Redis server command parser in Apache bRPC accepts an empty RESP array as a command header. A remote unauthenticated attacker who can reach a bRPC server with Redis service enabled can send an empty array header followed by a bulk string, causing an out-of-bounds write in the parser and crashing the process.
Root Cause:
RedisCommandParser::ConsumeImpl rejected negative RESP array counts but accepted zero. It resized the command argument vector to zero elements and continued parsing. When a following bulk string was parsed, the only index guard was a CHECK. In configurations where fatal logs do not abort immediately, execution could continue and write to _args[0] even though the vector was empty.
Affected Scenarios:
Deployments that enable ServerOptions.redis_service and accept Redis protocol traffic from untrusted clients. The issue is reached during parsing before command handling or authentication.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3354
Note:
The fix rejects empty RESP arrays as invalid Redis commands and replaces the internal index CHECK with an explicit parse error so malformed command streams cannot fall through to an indexed vector write. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hdmi: Move packet RAM enable to PM runtime
Audio can be triggered by the HPD handler and start up before video has
been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe.
vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the
infoframe, however, if the video hasn't been enabled,
vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the
Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes,
causing the following splat:
[ 201.570266] ------------[ cut here ]------------
[ 201.570293] Packet RAM has to be on to store the packet.
[ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606
[...]
[ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 201.758499] Call trace:
[ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P)
[ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4]
[ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper]
[ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper]
[ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4]
[ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper]
[ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec]
[ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core]
[ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core]
[ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core]
[ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm]
[ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm]
[ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm]
[ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm]
[ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm]
[ 201.846802] __arm64_sys_ioctl+0x88/0xd8
[ 201.850769] invoke_syscall+0x48/0xf4
[ 201.854470] el0_svc_common+0x80/0xd8
[ 201.858171] do_el0_svc+0x1c/0x28
[ 201.861520] el0_svc+0x3c/0xb0
[ 201.864605] el0t_64_sync_handler+0x68/0xdc
[ 201.868834] el0t_64_sync+0x198/0x19c
[ 201.872536] ---[ end trace 0000000000000000 ]---
Considering that Packet RAM enable is essentially a power management
configuration, move its enabling/disabling to the Runtime PM hooks.
Note that post_crtc_disable() still stops all infoframes, but keeps Packet
RAM enabled, leaving it to be disabled by runtime suspend. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exec: don't immediately add prelocked obj to array of locked objs
When a contention is detected the drm_exec object grabs a reference to
the contended object, unlocks all other objects and pre-locks the
contended one before anything else.
The problem is that it is possible that this pre-locked object was about
to be destroyed and drm_exec is now holding the last reference to it.
So we never actually see this pre-locked object again to be explicitly
locked and so also never reserve a slot for a dma_fence object on it.
Should the driver now use drm_exec_for_each_locked_object() to add a new
fence to all locked objects we eventually see a warning or even a
BUG_ON() to prevent random memory corruption.
Fix this by keeping the prelocked object out of the array of locked objs
until it was explicitly mentioned by the driver again.
If the prelocked object is never mentioned again by the driver
just unlock and drop the reference at the end of the locking loop. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use active memslots for the per-vCPU MMIO cache
KVM tags the per-vCPU MMIO cache with a memslot generation so that a
memslot update invalidates cached MMIO information. Both the fill and
validation paths use kvm_memslots(), which unconditionally selects address
space 0, even when the vCPU is running in SMM and using address space 1.
Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the
memslot generation to the cache key so that a memslot update could not
leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM
to the MMU role, support SMRAM address space") added the SMM address space,
these helpers were not converted to use the active memslots.
Consequently, an update to the SMM memslots can leave an entry from the old
SMM address space apparently valid after the vCPU returns to the normal
address space. A guest can then cause an access to valid RAM at the same
GFN to be returned to userspace as KVM_EXIT_MMIO.
Completing that exit through the VMM's RAM address space writes the backing
page without going through KVM's write-tracking path. If the page backs a
nested EPT table, KVM can continue using shadow translations derived from
the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault()
catches this invalid cache and memslot combination.
Use the vCPU's active memslots when caching and validating the entry.
Memslot generations are unique across address spaces, so the generation
also distinguishes the normal and SMM views. This matches the MMIO SPTE
cache, which already uses kvm_vcpu_memslots().
On an unpatched current-mainline kernel, a regression test that fills the
cache in SMM and updates only the SMM memslots fails the intended RAM write
and triggers the kvm_mmu_write_protect_fault() warning. With this change,
the same test completes the RAM write without a warning. The x86/smm_test,
set_memory_region_test, and memslot_modification_stress_test selftests also
pass. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not warn on route notification size race
fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later
fills it with rt6_fill_node(). With nexthop compatibility mode enabled,
a concurrent replacement can grow the group between these independent
snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so
the warning does not prove a sizing bug.
Remove the warning. The existing error path still frees the skb and
reports the error to listeners. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: guard the ll header push in packet_rcv_spkt()
packet_rcv_spkt() restores the link layer header with
skb_push(skb, skb->data - skb_mac_header(skb));
That subtraction is only meaningful when the device actually has a link
layer header. packet_rcv() and tpacket_rcv() both wrap it in
dev_has_header(), which is also the predicate the block comment at the
top of the file states the restore in terms of; packet_rcv_spkt() does
not. commit d549699048b4 ("net/packet: fix packet receive on L3
devices without visible hard header") introduced the helper and changed
the two call sites, and this one stayed behind.
A device without a visible ll header can leave skb->mac_header at the
0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does:
init_can_skb() sets pkt_type and ip_summed but does not reset the
headers, and commit 9f10374bb024 ("can: remove private CAN skb
headroom infrastructure") dropped the skb_reset_*_header() calls that
used to be there. skb_mac_header() is then 0xFFFF, the length becomes
a large negative number and skb_push() reports it through
skb_under_panic() -- from softirq context, so it is a full system panic
even with panic_on_oops=0:
skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0
kernel BUG at net/core/skbuff.c:214!
RIP: 0010:skb_panic+0x50/0x60
Call Trace:
<IRQ>
skb_push+0x38/0x40
packet_rcv_spkt+0xe1/0x170
__netif_receive_skb_core.constprop.0+0x7e8/0xd30
...
Kernel panic - not syncing: Fatal exception in interrupt
The socket type is reachable: packet_create() accepts SOCK_PACKET
alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check,
and neither the socket length nor a capability check keeps it away
from a CAN interface.
The missing skb_reset_*_header() calls in init_can_skb() are a
regression in their own right and are being fixed separately, but a
packet socket should not turn a link layer that did not initialise its
mac header into a kernel panic. Guard the push the way the other two
receive paths do.
Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is
the driver RX path: vcan does not reproduce it, because can_send()
resets the headers on the way out. One SOCK_PACKET socket bound to
can0 and one frame written into the line discipline panics an
unpatched kernel with the trace above; the same image with this patch
prints no panic and powers off normally. Both kernels are this tree,
defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN
__drm_fb_helper_initial_config_and_unlock() calls
drm_client_modeset_probe() first, which already fills in each
mode_set->mode/num_connectors for every connected output, and only
afterwards calls drm_fb_helper_single_fb_probe() to create
fb_helper->fb and wire it into those mode_sets via
drm_setup_crtcs_fb().
If drm_fb_helper_single_fb_probe() fails with anything other than
-EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function
bails out before drm_setup_crtcs_fb() runs and before setting
fb_helper->deferred_setup. The client is left with mode_sets that
have a mode and connectors but mode_set->fb == NULL, and nothing
marks this fb_helper as needing a retry.
__drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing
when fb_helper->deferred_setup is set, so a later .restore() call
(drm_lastclose() on process exit, in this report) commits the stale
mode_set through drm_client_modeset_commit() ->
drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(),
which hits WARN_ON(!set->fb).
Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe()
failure, not just -EAGAIN, so restore keeps skipping the commit until
a later hotplug event successfully re-probes and re-populates
mode_set->fb. The real error code is still returned to the caller
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: adau1372: allow sleepy powerdown GPIOs
gpiod_set_value() emits a WARN when the GPIO provider indicates that it
can sleep, as is typical for I2C controlled GPIO expanders. Since the
powerdown GPIO is only manipulated in process context, use the _cansleep
variant instead. This lets the driver use sleepy GPIOs to power off the
chip. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()
Since commit d58e468b1112 ("flow_dissector: implements flow dissector
BPF hook") __skb_flow_dissect() needs a net pointer, either from
skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network
namespace into __skb_flow_dissect") a caller provided pointer.
syzbot was able to reach seg6_make_flowlabel() with an skb having
neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery
message through an IPv4 route using seg6 encap, while
net.ipv6.seg6_flowlabel is set to 1.
seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net().
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930
Call trace:
__skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P)
__skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903
skb_get_hash include/linux/skbuff.h:1663 [inline]
seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132
__seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161
seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:431
seg6_output_core+0x164/0x688 net/ipv6/seg6_iptunnel.c:681
seg6_output+0x44/0x1ac net/ipv6/seg6_iptunnel.c:744
lwtunnel_output+0x3d0/0x664 net/core/lwtunnel.c:356
dst_output include/net/dst.h:470 [inline]
ip_local_out+0x110/0x148 net/ipv4/ip_output.c:131
iptunnel_xmit+0x50c/0xd38 net/ipv4/ip_tunnel_core.c:97
udp_tunnel_xmit_skb+0x220/0x348 net/ipv4/udp_tunnel_core.c:187
tipc_udp_xmit+0x75c/0x9c0 net/tipc/udp_media.c:202
tipc_udp_send_msg+0x214/0x374 net/tipc/udp_media.c:274
tipc_bearer_xmit_skb+0x260/0x3b0 net/tipc/bearer.c:576
tipc_enable_bearer net/tipc/bearer.c:366 [inline]
__tipc_nl_bearer_enable+0xc90/0xfb0 net/tipc/bearer.c:1048
tipc_nl_bearer_enable+0x2c/0x48 net/tipc/bearer.c:1057
genl_family_rcv_msg_doit+0x1e4/0x2d4 net/netlink/genetlink.c:1114 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: handle empty FILS association request payload
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and the S2V result is then the
complete output, so handle this case before the CTR step, which has
nothing to encrypt. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0
The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement
entry alive when removing the id 0 endpoint. This happens because the id 0
removal path does not tear down pending announcements, unlike the non-zero
id path.
When the PM later reselects id 0 after adding another signal endpoint, it
finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel())
in mptcp_pm_announced_alloc().
Root cause: asymmetry between removal paths.
- Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls
mptcp_pm_remove_announced() to clean up.
- Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely.
Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove()
and decrement add_addr_signaled before queuing the RM_ADDR.
Subtle detail: signal endpoints are stored in anno_list with port 0, but
msk_local carries the connection's local port. In other words, entries
linked to ID0 paths should have port == 0. A follow-up patch will ensure
that. mptcp_pm_announced_remove() uses use_port=true for comparison. So
clear the port before the lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: accurately adjust free_sections during free_segment_range
In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs`
to restrict block allocation to the safe remaining main area while valid
blocks in the truncated range are evacuated by GC.
However, FREE_I(sbi)->free_sections tracks the total number of free
sections across the whole filesystem. If any sections within the
truncated range were already free upon entering free_segment_range(),
failing to deduct them from free_sections causes the filesystem to
overestimate available free sections in the active, reduced main area.
This leads to inconsistent free section accounting during GC data
migration and can trigger unexpected allocation failures or assertion
errors when space is tight.
Fix this by calculating the number of already-free sections in the
truncated range, deducting them from free_sections upon entering
free_segment_range(), and restoring them on exit. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: Avoid warning when removing a device while its supplier is unbinding
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
driver_detach+0xa0/0x12c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
pci_unregister_driver+0x20/0x9c
lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci]
This warning is triggered when a consumer is removed because the links
status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag
DL_FLAG_SYNC_STATE_ONLY is not set.
The topology in terms of consumers/suppliers used was the following
(consumer ---> supplier):
i2c -----------> OIC ----> PCI device
| ^
| |
+---> pinctrl ---+
When the PCI device is removed, the OIC (interrupt controller) has to be
removed. In order to remove the OIC, pinctrl and i2c need to be removed
and to remove pinctrl, i2c need to be removed. The removal order is:
1) i2c
2) pinctrl
3) OIC
4) PCI device
In details, the removal sequence is the following (with 0000:01:00.0 the
PCI device):
driver_detach: call device_release_driver_internal(0000:01:00.0)...
device_links_busy(0000:01:00.0):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(0000:01:00.0):
0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(oic)...
device_links_busy(oic):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(oic):
oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(pinctrl)...
device_links_busy(pinctrl):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(pinctrl):
pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(i2c)...
device_links_busy(i2c): links->status = DL_DEV_UNBINDING
__device_links_no_driver(i2c)...
pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND
oic--i2c link->status is DL_STATE_ACTIVE
oic--i2c link->supplier->links.status is DL_DEV_UNBINDING
The warning is triggered by the i2c removal because the OIC (supplier)
links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set
to DL_DEV_UNBINDING.
It is perfectly legit to have the links status set to DL_DEV_UNBINDING
in that case. Indeed we had started to unbind the OIC which triggered
the consumer unbinding and didn't finish yet when the i2c is unbound.
Avoid the warning when the supplier links status is set to
DL_DEV_UNBINDING and thus support this removal sequence without any
warnings. |
