| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in MRTG. When the MRTG daemon is started as a root user and subsequently drops privileges, a local, low-privileged attacker can exploit a symbolic link (symlink) following vulnerability. By influencing or pre-placing a symlink in the process ID (PID) file path, the attacker can trick the root process into changing the ownership of an arbitrary existing file to the daemon user. This can lead to local privilege escalation, allowing unauthorized access to or modification of sensitive files. |
| BusyBox libarchive Symlink Directory Traversal Arbitrary File Creation Vulnerability. This vulnerability allows remote attackers to create arbitrary files on affected installations of BusyBox. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the libarchive component. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to create files in the context of the current user. Was ZDI-CAN-27556. |
| ProFTPD through 1.3.9e and 1.3.10rc1 through 1.3.10rc4 contains a link-following vulnerability in mod_copy that allows authenticated FTP users to bypass Limit WRITE restrictions via symlinks. Attackers can place a symlink in a writable directory and use SITE COPY or SITE CPTO to overwrite files in write-denied locations. |
| Improper link resolution before file access ('link following') vulnerability in Velneo vServer. This issue affects vServer: from 32.3 before 36.6 and from 37.1 before 37.2. |
| Zuke is a code-first, strongly typed build automation system for Deno. Prior to 1.4.0, @zuke/cli uses lstat to inspect scaffold names but then performs link-following reads, writes, and permission changes in zuke setup and zuke import. An attacker who supplies an untrusted cloned repository, template, or archive with a symbolic link at a scaffolded name can cause setup to overwrite a target outside the selected directory with the invoking user's permissions. The .gitignore path requires no flag, while --force permits a linked launcher target to be written and made executable; import can also read link-target content and incorporate it into the generated build file. This issue is fixed in version 1.4.0. |
| Bastille through 1.4.4 contains a symlink following vulnerability in the cp.sh, rcp.sh and jcp.sh subcommands that allows jailed users to escape jail isolation. Attackers inside a jail can plant symlinks pointing to host paths or other jail roots, so administrator-run copies overwrite or read host files with root privileges. |
| Improper Link Resolution Before File Access ('Link Following') (CWE-59) in Elastic Cloud Enterprise (ECE) can lead to authentication bypass and unauthorized changes to the configuration of other deployments on the same host via Symlink Attack (CAPEC-132). |
| Improper Link Resolution Before File Access ('Link Following') (CWE-59) in Elastic Cloud Enterprise (ECE) can lead to unauthorized disclosure and loss of data belonging to other deployments on the same host via Symlink Attack (CAPEC-132). |
| Improper Link Resolution Before File Access ('Link Following') (CWE-59) in Elastic Cloud Enterprise (ECE) can lead to unauthorized read and write access to data of other deployments on the same host via Symlink Attack (CAPEC-132). |
| HashiCorp Nomad and Nomad Enterprise are vulnerable to symlink following during dispatch payload and executor log writes that may allow a malicious workload to modify files outside its allocation directory. When the client agent runs as root, this could lead to code execution as root on the client host. This vulnerability (CVE-2026-107347) is fixed in Nomad 2.1.1 and Nomad Enterprise 2.1.0, 1.11.12, and 1.10.18. |
| HashiCorp Nomad and Nomad Enterprise are vulnerable to symlink following during same-client allocation data migration that may allow a malicious workload to change permissions and ownership of host directories. This could allow unauthorized access to host data or modification of host files, potentially leading to privilege escalation. This vulnerability (CVE-2026-119168) is fixed in Nomad 2.1.1 and Nomad Enterprise 2.1.0, 1.11.12, and 1.10.18. |
| CallBackery versions before 0.62.0 for Perl leave a world-readable dump of the configuration database in /tmp when taking a configuration backup.
getConfigBlob() has the sqlite3 shell write the dump to /tmp/cbdump<pid> and never removes it. The file takes the process umask, and a symlink planted at that predictable name is followed.
The dump holds every user's password hash and every value saved by the application's forms. A local user can read these after any backup, and may redirect the dump to a file of their choosing. |
| A flaw was found in GNU tar. When extracting an archive with the --one-top-level option, hardlink targets are not confined to the designated top-level directory and may resolve relative to the extraction working directory. A crafted archive can create hardlinks that escape the intended boundary and, when combined with a preexisting symbolic link under the working directory, may allow writing outside that boundary during a single extraction. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, cgroup: Fix invalid storage access after __cgroup_bpf_attach failed
A potential invalid storage access issue can occur after replacing a
cgroup bpf prog.
This occurs in the following scenario:
1. prog1 with storage is attached to a cgroup in multi-attach mode.
2. prog1 is replaced with prog2 using BPF_F_REPLACE in multi-attach
mode, but fails midway (e.g. in bpf_trampoline_link_cgroup_shim or
update_effective_progs).
3. A new prog3 is attached to the cgroup in multi-attach mode.
The reason is that __cgroup_bpf_attach overwrites pl->storage with the
new storage prior to attachment completion. When attachment fails
midway, the cleanup path calls bpf_cgroup_storages_free(new_storage) to
free the newly allocated storage, but fails to restore pl->storage back
to old_storage.
Consequently, the still-active prog1 holds invalid or dangling storage
pointers, leading to an invalid memory access when prog1 executes and
calls bpf_get_local_storage. Additionally, original pl->flags and
cgrp->bpf.flags[atype] are left unrestored.
Fix this by saving old_pl_flags, old_storage, and old_flags prior to the
update, and properly restoring all of them in the cleanup path on error. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory corruption by not reinjecting CK machine checks
Channel-subsystem damage machine checks are for the host channel
subsystem. The guest channel subsystem is emulated in the userspace VMM.
There is no point in forwarding such machine checks into the guest.
This also simplifies the machine check reinjection and avoids kfree of a
stack variable as reported by sashiko. There might be still machine
checks that have the ck bit set with another bit (like instruction
damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and
ED bits already are. |
| A file overwrite vulnerability exists in Epiphany when installing WebExtension packages from .xpi files.
In src/webextension/ephy-web-extension-manager.c, decompress_xpi_thread() used libarchive with archive_read_support_format_all() (and filters), so the installer did not require a real ZIP. A TAR file named *.xpi was extracted. TAR supports hard-link entry types; with Epiphany's archive_write_disk options (including ARCHIVE_EXTRACT_PERM), a crafted hard-link target can cause an attacker-chosen existing user-writable file to be truncated and overwritten with attacker-controlled content and mode bits, without a dedicated warning dialog, when the user installs or opens the crafted .xpi.
This is related to but separate from the ZIP-slip path traversal fixed as CVE-2026-77679 (#2922 / MR !2143).
Requirements: the victim must install or open a malicious WebExtension (.xpi).
Affected: Epiphany >= 47.0 (WebExtension XPI install path).
Fixed: https://gitlab.gnome.org/GNOME/epiphany/-/merge_requests/2248 (commit 0cc9ab55 — only enable ZIP format support).
Upstream: https://gitlab.gnome.org/GNOME/epiphany/-/work_items/2988
Reporter acknowledgment: Fernando Munoz |
| Improper link resolution before file access ('link following') in Windows AppX Deployment Service allows an authorized attacker to elevate privileges locally. |
| Improper link resolution before file access ('link following') in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally. |
| Improper link resolution before file access ('link following') in Windows User Profile Service allows an authorized attacker to elevate privileges locally. |
| Improper link resolution before file access ('link following') in Windows Update Orchestrator Service allows an authorized attacker to disclose information locally. |
