| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Pillow is a Python imaging library. Prior to 13.0.0, MpoImageFile.seek() and DcxImageFile.seek() reparse later MPO or DCX frames and replace self._size without rerunning Image._decompression_bomb_check(). A crafted multi-frame image can use a tiny first frame to pass Image.open() and then declare an over-limit later frame. Normal frame iteration through seek(), load(), or ImageSequence.Iterator can decode that frame and commit hundreds of megabytes or more, causing memory-exhaustion denial of service. This issue is fixed in version 13.0.0. |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB allows authenticated API users to bypass the configured maximum attachment file size by uploading attachments through the API using base64-encoded file data. The application enforces the configured attachment size limit for normal browser-based file uploads, but the API base64 upload path does not apply the same size validation. As a result, an authenticated user with API access and permission to create attachments can upload files larger than the configured maximum attachment size, potentially exhausting disk space and causing a denial of service. This issue has been patched in version 2.13.2. |
| Uncontrolled resource consumption in the HTTP/2 (h2) receive path of Apache bRPC (version < 1.18.0) on all platforms allows a remote unauthenticated attacker to crash the server or grow its memory without bound by sending crafted HTTP/2 frames.
Root Cause:
The h2 parser, enabled by default on every bRPC server port and used by h2/gRPC clients, trusts the peer to respect receive-side limits that bRPC advertises but never enforces:
1. SETTINGS_MAX_CONCURRENT_STREAMS defaulted to unlimited and was never checked on the server, letting a peer pin an unbounded number of pending streams per connection (~100x memory amplification).
2. SETTINGS_MAX_HEADER_LIST_SIZE defaulted to unlimited and was never enforced; 1-byte HPACK indexed references amplify a small HEADERS frame ~4000x into an unbounded decoded header list ("HPACK bomb"), and a never-completed HEADERS/CONTINUATION block accumulates memory without limit.
3. Control-frame acks (PING/SETTINGS acks, RST_STREAM, GOAWAY, WINDOW_UPDATE) unconditionally bypassed the -socket_max_unwritten_bytes write cap, so a PING flood combined with withheld TCP reads grew the connection buffer without the documented bound.
4. The HPACK dynamic table size update was validated against the protocol default (4096) instead of the advertised SETTINGS_HEADER_TABLE_SIZE, which together with the dynamic-table queue/accounting issue can desynchronize the decoder and dereference NULL (crash).
Affected scenarios:
Any bRPC server serving HTTP/h2/gRPC to an untrusted network, and any bRPC h2/gRPC client connecting to an untrusted backend. The h2 parser runs before any Authenticator check on the shared port.
How to fix:
Upgrade bRPC, or apply the patch in https://github.com/apache/brpc/pull/3474.
Note:
After applying the fix the following limits are enforced by default:
- max_concurrent_streams: 1024 per connection (4294967295 restores unlimited).
- max_header_list_size: 1 MiB decoded size per stream (4294967295 restores unlimited; -h2_client_max_header_list_size for clients).
- h2 control-frame acks respect -socket_max_unwritten_bytes (-h2_ack_ignore_eovercrowded restores the old behavior).
Requests exceeding these limits are rejected (RST_STREAM(REFUSED_STREAM) or a connection error). |
| Improper Validation of Specified Quantity in Input vulnerability in the Elixir standard library's URI module allows an attacker who supplies a URL to cause a denial of service through CPU exhaustion.
URI.parse/1 converts the port component with String.to_integer/1 in split_authority/1 (lib/elixir/lib/uri.ex) without bounding its length, so a port of up to 1,262,592 decimal digits produces a bignum of that size and a longer one raises SystemLimitError. Rendering the parsed URI back to text (URI.to_string/1, inspect/1, logging, error formatting) converts the bignum with :erlang.integer_to_binary/1, which is quadratic on Erlang/OTP 27, 28 and 29.0: a 400,000-digit port renders in about 2.6 seconds and a 1 MB port in about 18 seconds. Ports above 65535 are also accepted.
This issue affects elixir: from 0.5.0 before 1.18.6, from 1.19.0-rc.0 before 1.19.7, and from 1.20.0-rc.0 before 1.20.5. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can consume excessive memory while opening a crafted PDF containing cross-reference streams that declare very large entry counts. Highly compressible streams and /Prev chains can multiply the number of parsed entries across a document, while negative /Index counts can bypass the existing per-stream clamp. This issue is fixed in version 6.21.3. |
| An issue in the GraphQL endpoint of traggo server v0.8.3 allows attackers to cause a Denial of Service (DoS) via a crafted POST request to the GraphQL endpoint |
| A denial-of-service vulnerability exists in UAA's private_key_jwt client-authentication mechanism. When UAA retrieves a remote JWKS URI, it caches the response. Invalid authentication attempts can trigger full deserialization of this cached data. An attacker with prerequisites (write access to clients or a compromised endpoint) can send anonymous requests that force repeated parsing of large cached objects, causing excessive CPU usage and potential Java heap exhaustion via OutOfMemoryError, resulting in service unavailability. |
| GraphQL-core is a Python port of the GraphQL.js reference implementation. From 3.3.0a3 until 3.3.1, validate() reuses a module-level ValidationAbortedError when a document exceeds max_errors. Python appends frames to the reused exception's traceback on every raise, retaining each document, validation context, and error set for the process lifetime. An unauthenticated client can repeatedly submit a small document with more than 100 validation errors to cause unbounded memory growth before query execution, eventually exhausting worker memory without disclosing or modifying data. This issue is fixed in version 3.3.1. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.2, an incomplete remediation for repeated malformed cross-reference entries in GHSA-55h5-xmcq-c37v could still trigger a complete PDF stream reload during each recovery attempt even when a recovery cache was present, causing crafted cross-reference streams to produce long runtimes. This issue is fixed in version 6.21.2. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.0, accessing a crafted PDF stream with a large number of filters or multiple filters that pass around large amounts of data can cause large memory consumption. This issue is fixed in version 6.20.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.0, an attacker can craft a PDF containing a content stream with many small operations, causing parsing to consume large amounts of memory. This issue is fixed in version 6.21.0. |
| External control of file name or path and uncontrolled resource consumption in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers who can reach the builtin service port to create directories and truncate/overwrite files with the privileges of the server process, or to hold the process-wide CPU/contention profiler for an arbitrarily long time.
Root Cause:
1. The builtin /flags service allows gflags carrying a validator to be modified at runtime via ?setvalue=. The bvar/mbvar dump path gflags (bvar_dump_file, bvar_dump_tabs, mbvar_dump_file) were registered with an accept-anything validator whose only purpose was to wake the dumping thread. A remote attacker could therefore repoint the dump path (e.g. GET /flags/bvar_dump_file?setvalue=/victim/dir/target followed by GET /flags/bvar_dump?setvalue=true, or the equivalent for mbvar_dump_file, which is used verbatim without a forced suffix), making the dumping thread recursively create directories and open/truncate files at attacker-chosen locations. Tab names in bvar_dump_tabs were appended to the path without sanitization, allowing '..' to escape the configured directory.
2. The /pprof builtin service did not clamp the ?seconds= parameter to FLAGS_max_profiling_seconds (a limit that /hotspots enforced). A single request such as ?seconds=2147483647 made the handler sleep for decades while holding the process-wide gperftools CPU profiler or bthread contention profiler, so /hotspots/cpu and /hotspots/contention returned 503 for everyone else during that time.
Affected Scenarios:
Any Apache bRPC server exposing the builtin services (enabled by default on the same port as normal RPC traffic) to untrusted networks.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3523
Note:
After the fix, bvar_dump_file, bvar_dump_tabs and mbvar_dump_file can no longer be modified at runtime through the /flags builtin service. They can still be changed programmatically via google::SetCommandLineOption(), taking effect on the next dump cycle. The profiling duration of /pprof is now capped by the -max_profiling_seconds gflag (default 300 seconds), which can be adjusted by the server owner. |
| Uncontrolled resource consumption in the streaming RPC component of Apache bRPC (version < 1.18.0) allows a remote attacker to exhaust server memory and cause denial of service by sending a single RPC request that declares an excessive number of streams.
Root Cause:
In the streaming RPC feature, a client can declare multiple streams in one RPC request by putting extra stream identifiers into the repeated field `stream_settings.extra_stream_ids` of the RPC meta. On the server side, `StreamAccept` creates one response stream for every stream identifier declared by the request, without limiting the number of streams accepted in a single RPC. The request body size is only bounded by `max_body_size` (default 64MB), which is enough to carry millions of stream identifiers. Each accepted stream allocates its own bthread execution queue and associated resources, so a single crafted request can make the server create a huge number of streams and exhaust memory, leading to denial of service.
Affected Scenarios:
Use a bRPC server that serves streaming RPC and calls `StreamAccept` to accept streams from untrusted clients.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to the 1.18.0 version.
2. Apply this patch: https://github.com/apache/brpc/pull/3493
Note:
The fix adds a new gflag `stream_max_streams_per_request` with a default value of 64. Requests declaring more streams than the limit are rejected before any response stream is created. Applications that legitimately need to accept more than 64 streams in one RPC must raise this flag; otherwise such requests will fail after applying the fix. |
| vLLM is an inference and serving engine for large language models. From 0.16.0 until 0.32.0, the /v1/responses endpoint allows an authenticated caller to place an attacker-controlled template in chat_template_kwargs[chat_template] when no server template is configured. ChatParams.get_apply_chat_template_kwargs() preserves that value without enforcing trust_request_chat_template, so the request can bypass the intended trust policy and cause CPU or memory exhaustion through Jinja rendering. This issue is fixed in version 0.32.0. |
| vLLM is an inference and serving engine for large language models. From 0.19.0 until 0.32.0, authenticated callers can supply a request chat template when no server-side --chat-template is configured, or a malicious model repository can provide a template that is compiled and rendered by tokenizer.apply_chat_template() without a wall-clock timeout, output-size limit, or iteration bound. Rendering runs in a ThreadPoolExecutor with one worker by default, so a nonterminating render can block /v1/responses and other chat-template users after the request ends, while an output-expanding render can exhaust server memory. Harmony models are not affected because they do not use this Jinja path. This issue is fixed in version 0.32.0. |
| zip is a zip library for Rust that supports reading and writing simple ZIP files. From 5.1.0 until 9.0.0, applications built with the legacy-zip feature can reserve output capacity from an attacker-controlled ZIP64 uncompressed size before validating the compressed stream. The ShrinkDecoder path in src/legacy/shrink.rs can panic with a capacity overflow during ZipArchive::extract, and the Reduce and Implode decoders contain the same unbounded preallocation pattern. An unhandled panic can terminate an archive-processing service. This issue is fixed in version 9.0.0. |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.words.protocols.irc.IRC.dataReceived retains all bytes received without a line feed in its per-connection buffer and applies no maximum line length. The twisted.words.service.IRCUser server subclass inherits this behavior, and buffering occurs before PASS, NICK, or USER authentication commands. An unauthenticated connection can continuously grow the buffer until the shared server process runs out of memory and drops all users. This issue is fixed in version 26.10.0rc1. |
| toml-node is a TOML parser for Node.js and the browser. Prior to 5.0.1, toml.parse() passes unbounded hexadecimal, octal, binary, and decimal digit sequences from lib/parser.js to BigInt() before reduceInteger() in lib/compiler.js checks whether the resulting value fits the TOML 64-bit integer range. Converting a sufficiently long integer string consumes super-linear CPU time and synchronously blocks the Node.js event loop, allowing one attacker-supplied TOML document to deny service to concurrent work in the process. The later range check cannot prevent the conversion cost because it executes after BigInt(). This issue is fixed in version 5.0.1. |
| Apache bRPC versions before 1.18.0 do not consistently enforce the configured max_body_size limit in non-progressive HTTP/1 and HTTP/2 parsing and in memcache and couchbase response parsing.
A remote unauthenticated peer can cause an affected process to buffer message data beyond the configured limit, which may lead to memory exhaustion and denial of service.
Users should upgrade to 1.18.0 or apply the patch from PR https://github.com/apache/brpc/pull/3382 . The fix rejects oversized buffered HTTP bodies, returns HTTP 413 for HTTP/1 requests, resets oversized HTTP/2 streams, and rejects oversized memcache and couchbase responses from their declared lengths. Progressive HTTP reading remains supported because it uses bounded buffering. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: unregister DualPoint Stick input device on remove
alps_input_configured() allocates a second input device ("DualPoint
Stick") with input_allocate_device() and registers it, but the
alps_driver struct has no .remove handler and input2 is not tracked in
hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect)
only iterates hdev->inputs, so input2 is never unregistered and leaks
on every device removal.
Add a .remove handler that stops the device first (preventing URB
callbacks from touching input2 during teardown) and then unregisters
input2. |
