| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tornado is a Python web framework and asynchronous networking library. Prior to 6.6, Tornado's HTTP header parser accepts obsolete line folding and repeatedly concatenates short continuation lines, causing quadratic CPU consumption on the IOLoop thread. An unauthenticated client can submit a header block containing many obsolete line-folding continuations before application code runs, blocking other connections served by the process. The cost grows with max_header_size, and only availability is affected. This issue is fixed in version 6.6. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used asn1.fromDer(), BIT STRING decoding, maxDepth to process the relevant input or security decision. node-forge decoded ASN.1 stored inside BIT STRING values without consistently applying the configured maxDepth limit and recursively retained copies at each nesting level. Crafted DER containing nested BIT STRINGs could cause excessive recursion, CPU use, and quadratic memory consumption during asn1.fromDer(). This issue is fixed in version 1.4.1. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can consume excessive memory while opening a crafted PDF containing cross-reference streams that declare very large entry counts. Highly compressible streams and /Prev chains can multiply the number of parsed entries across a document, while negative /Index counts can bypass the existing per-stream clamp. This issue is fixed in version 6.21.3. |
| A flaw was found in dnsmasq. The TCP DNS service uses a small fixed pool of child processes and does not set a receive timeout on client connections. A remote attacker can open idle TCP connections to port 53 and occupy the entire pool, preventing new TCP DNS connections and DNSSEC validation that requires TCP fallback. UDP DNS resolution continues, and occupied slots are released after a fixed lifetime. |
| An issue in the GraphQL endpoint of traggo server v0.8.3 allows attackers to cause a Denial of Service (DoS) via a crafted POST request to the GraphQL endpoint |
| minimatch is a minimal matching utility for converting glob expressions into JavaScript RegExp objects. Prior to 11.0.1, src/index.ts implements firstPhasePreProcess() so that, at optimizationLevel 2 or higher, it repeatedly expands attacker-controlled **/.. pattern segments inside a fixpoint loop, allowing generated globParts entries to be processed and expanded again. secondPhasePreProcess() then compares the expanded entries pairwise, so a short malicious glob can cause excessive CPU and memory consumption during pattern compilation. This issue is fixed in version 11.0.1. |
| DateTime::Lite versions before 0.8.1 for Perl allow CPU exhaustion via a per-day loop when adding seconds.
_normalize_leap_seconds crosses day boundaries one day at a time, so add(seconds => $n) on an object with a non-floating time zone takes about |$n|/86400 iterations, and nothing limits $n. The XS implementation and the pure-Perl fallback both have the loop.
An attacker who controls the number of seconds added can keep the process busy for as long as they choose. |
| VoiceSentinel is a real-time voice moderation system for Minecraft servers. From 2.2.1 until 3.3.1, the optional report buffer feature has a race between retention cleanup and normal transcript writes. In `report_buffer.py`, `_maybe_cleanup()` uses an unlocked dictionary for once-per-hour cleanup throttling, allowing simultaneous `_cleanup_tenant()` operations for one tenant. Cleanup reads `transcripts.jsonl` and rewrites it in place without file locking or atomic replacement, while `report_buffer_append_async` uses `asyncio.to_thread` to append without synchronization. In `main.py`, concurrent `_processing_worker` tasks make this reachable in normal operation; `processing.worker_count` of two or more and public-pool servers sharing a `server_key` increase collisions. With `report_buffer.enabled` set to true, racing writes can lose, duplicate or corrupt transcript data and defeat `report_buffer.retention_seconds` pruning, allowing unbounded disk growth that can exhaust storage and crash the host or other services sharing it. The feature is opt-in and disabled by default. This issue is fixed in version 3.3.1. |
| Pistache is a high-performance REST toolkit written in C++. From 0.0.5 through 0.4.26, `SegmentTreeNode::sanitizeResource()` in `src/server/router.cc` uses `std::regex_replace()` with the `//+` expression to collapse consecutive slashes. With libstdc++, a path containing tens of thousands of consecutive slash characters can recurse deeply enough to exhaust the stack and crash the process. `Router::route()`, `Router::addRoute()` and `Router::removeRoute()` reach this normalization. Unauthenticated remote exploitation is conditional on a deployment allowing sufficiently long request paths, such as by increasing `Endpoint::Options::maxRequestSize()` above the default 4096-byte limit or forwarding long paths through a front end. Direct router API use is also affected when attacker-controlled route or resource strings reach the normalizer. Native builds reproduced a crash around 24,000 consecutive slashes, although the exact threshold depends on the stack and standard library; the demonstrated failure is stack exhaustion rather than uninitialized-memory use. A source fix replaces recursive regular-expression normalization with an iterative pass, but no containing repository release was verified as of time of publication. |
| Filecoin Pin is an IPFS Pinning Service API implementation that pins to Filecoin's PDP service. In daemon deployments up to and including version 1.1.0, `POST /pins` in `src/filecoin-pinning-server.ts` checks a caller-supplied CID with `CID.parse` and passes it to `pinStore.pin`, but does not enforce request rate limits or per-user quotas. In `src/filecoin-pin-store.ts`, each pin independently schedules `_processPinInBackground` with `setTimeout` without a queue, semaphore or concurrency cap, then recursively traverses the full DAG using `helia.pins.add(cid)`. The per-pin Helia/Bitswap node in `src/create-pinning-helia.ts` has no application-level byte, block or traversal-time limits. Blocks are written under `carStoragePath` by `src/core/car/car-blockstore-base.ts` and `src/core/car/car-file-backend.ts`, with `stats.totalSize` updated only after writing. An authenticated caller, or an anonymous caller when `ALLOW_NO_AUTH=true`, can submit large DAGs and exhaust disk, network, CPU, memory and libp2p resources, causing service degradation or host/process failure and leaving partial CAR files requiring recovery. The default localhost binding and token requirement reduce exposure. Because nodes have no bootstrap or mDNS configuration, a CID alone may not be fetchable, but caller-supplied `origins` can point to a reachable attacker-controlled libp2p source; concurrent requests accelerate resource pressure. Version 1.1.1 documents operational mitigations but does not implement the missing resource controls. |
| Aedes is an MQTT broker that can run on any stream server. Prior to 1.1.1, the MQTT broker does not bound topic depth or structural complexity before passing topics through `mqemitter` into `qlobber`. A `PUBLISH`, `SUBSCRIBE`, or registered `Will` message containing an excessively deep topic can reach `qlobber._split_words` in `lib/qlobber.js` and trigger an uncaught `too many words` exception. Calls from `handlers/subscribe.js` and the publishing logic are not protected against that exception, so it escapes to the `Node.js event loop` and terminates the entire broker. The `Will` path is independently reachable when a client disconnects ungracefully: it calls `broker.publish` directly and bypasses the `PUBLISH` handler. An attacker must be able to establish an `MQTT session`, authenticated or unauthenticated according to broker configuration. A successful attack disconnects all legitimate clients and prevents reconnection until the broker process restarts. This issue is fixed in version 1.1.1. |
| LibreDWG is a free C library to read and write DWG files. Prior to 0.14, a specially crafted R13-R2000 DWG can trigger algorithmic resource exhaustion in `decode_R13_R2000` in `src/decode.c`. The class-decoding loop performs `realloc` on every iteration without a sanity check on `num_classes`. Manipulating that field forces an extremely slow allocation loop and denial of service when the file is parsed. Running the parser in a sandbox with memory limits is a workaround rather than a remediation. This issue is fixed in version 0.14. |
| LibreDWG is a free C library to read and write DWG files. Prior to 0.14.8413, a crafted pre-R13 DWG can make `decode_preR13_entities()` in `src/decode.c` enter a nonterminating loop that allocates a new object each iteration. `decode_preR13` in `src/decode_r11.c` computes `size` from the raw file-controlled `entities_start` and `entities_end` header bounds; the callee clamps `end` to `dat->size` but never recalculates `size`. At `end` of input, `bit_read_RC` and `bit_read_RS` stop advancing `dat->byte`, the overflow guard fails because `end` equals `dat->size`, and the no-advance check compares against `oldpos` saved before the loop instead of the previous iteration. This leaves repeated allocation of `dwg->object` entries until allocation fails or the process is OOM-killed, not merely a constant-memory CPU hang. The defect remains after the clamping and no-progress changes associated with the earlier issue 1131. Applications and tools calling `dwg_read_file()` on untrusted files, including `dwg2dxf`, `dwgread` and `dwg2svg`, can suffer denial of service when a user or automated pipeline opens a malformed file; no attacker credentials are required. This issue is fixed in repository nightly version 0.14.8413. |
| Crass is a Ruby CSS parser that's fully compliant with the CSS Syntax Level 3 specification. Prior to 1.0.7, when Crass parses input containing `non-ASCII characters`, inefficiencies in tracking the positions of `multi-byte characters` result in superlinear parsing time. An attacker-controlled CSS input consisting of many `non-ASCII characters` can therefore cause excessive CPU consumption and potentially denial of service. This issue is fixed in version 1.0.7. |
| Daptin is a GraphQL/JSON-API headless CMS. Prior to 0.12.26, the global `LanguageMiddleware` in `server/language.go` passes the raw `Accept-Language` header from `LanguageMiddlewareFunc` through `GetLanguagePreference` to `golang.org/x/text/language.ParseAcceptLanguage` without a size or shape filter. The guard for CVE-2022-32149 counts hyphens but not underscores, even though the internal parser normalizes underscores to hyphens. Long lists of underscore-separated language subtags longer than eight characters bypass the guard. These subtags fail the `len <= 8` length check in `golang.org/x/text/internal/language/parse.go`, causing repeated `gobble` operations to move the entire remaining buffer through `runtime.memmove`. With many invalid subtags, this repeated buffer movement takes quadratic work. Unauthenticated requests to the public landing page or `/api` can consume disproportionate CPU, with a 256 KiB header already causing seconds of processing and larger input permitted by the default 1 MiB header ceiling. `resource.CheckErr` also logs the entire invalid header, amplifying cost, while normal successful HTTP responses can conceal the denial-of-service traffic. Repeated requests can saturate server CPU. This issue is fixed in version 0.12.26. |
| In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, an unauthenticated user could send a single crafted request to the Splunk Web JavaScript logger endpoint and cause Splunk Web to stop responding to requests. Splunk Web remains unavailable until Splunk Enterprise is restarted.
The vulnerability is possible because Splunk Web does not limit request-header parsing before processing the request. |
| In Splunk Enterprise versions below 10.4.4, 10.2.8, and 10.0.11, an unauthenticated user could send repeated requests to the Edge Processor package download endpoint in the Splunk Pipeline Builders app. The requests could cause the Splunk daemon to consume excessive system resources and potentially stop responding.
The vulnerability is possible because the endpoint accepts package download requests without authentication and reads and base64-encodes the complete package in memory for each request.
After upgrading, prepare all existing Edge Processor instances, turn on authentication for Edge Processor package downloads, and restart Splunk Enterprise. For more information, see Enable authentication for Edge Processor package downloads (https://help.splunk.com/en/data-management/process-data-at-the-edge/use-edge-processors-for-splunk-enterprise/10.4/administer-edge-processors/enable-authentication-for-edge-processor-package-downloads). |
| Improper Handling of Highly Compressed Data (Data Amplification) in esaml_binding in dropbox esaml allows an unauthenticated attacker to exhaust server memory and crash the Erlang VM via a crafted compressed SAMLResponse.
esaml_binding:decode_response/2 base64-decodes the attacker-supplied SAMLResponse, inflates it with zlib:unzip/1 with no bound on the output, then converts the result to a charlist with binary_to_list/1 before parsing. This runs on the SAML consume (ACS) and single-logout endpoints, which accept unauthenticated requests by design, and it runs before any signature check. A small deflate stream reaches a compression ratio near 1000 to 1, so a request body of tens of kilobytes inflates to hundreds of megabytes and then to several gigabytes of list heap, so a few requests exhaust memory and take the node down.
This issue affects esaml: from 0.1.0 onward. |
| A missing release of backend receiver sessions in the Ad Hoc Transfer component of Progress Software WS_FTP Server versions prior to 2024.0.7 and 2025.0.4 on Windows could lead to server resource exhaustion and service degradation. |
| Uncontrolled Resource Consumption vulnerability in Apache IoTDB JDBC driver.
This issue affects Apache IoTDB JDBC driver: from 1.3.3 before 2.0.11.
Users are recommended to upgrade to version 2.0.11, which fixes the issue. |
